The effect of different conditioning agents on dentin roughness and collagen structure.

OBJECTIVES: To assess the impact of various organic and inorganic acids on the roughness, demineralization, and collagen secondary structures of human dentin and to compare these effects with those of traditional agents, specifically phosphoric acid (PA) and ethylenediaminetetraacetic acid (EDTA). METHODS: Coronal dentin discs (n = 10) were examined by optical profilometry (roughness) and ATR-FTIR before and after conditioning with 32 % PA, 3 % nitric acid (NA), 20 % citric acid (CA), 20 % phytic acid (IP6) or 17 % EDTA. Spectra data were processed to quantify dentin demineralization (DM%) and percentage area of amide I curve-fitted components of ß-turns, 310-helix, α-helix, random coils, ß-sheets, and collagen maturation index. Statistical analysis was performed by one-way ANOVA or Kruskal-Wallis for DM% and roughness parameters, and paired t-test/Wilcoxon test for amide I components at significance level set at α = 0.05. RESULTS: All treatments resulted in increased roughness parameters, with the most significant changes occurring primarily with PA, while EDTA exhibited the least changes. DM% was NA>PA>IP6>CA>EDTA in a descending order. Regarding amide I components, NA demonstrated a significant reduction in ß-turns, 310-helices, and α-helices and it increased ß-sheets and random coils. PA resulted in reduction in ß-turns and α-helices while it increased ß-sheets. CA and EDTA did not cause significant changes. The collagen maturation index significantly increased only after IP6 treatment. CONCLUSIONS: The effect on dentin roughness parameters, demineralization, and collagen secondary structures varied based on the type of dentin surface treatment. CLINICAL SIGNIFICANCE: Understanding the impact of acids on the intrinsic properties of dentin is clinically essential for gaining insights into how these effects influence adhesion to dentin, the long-term stability of resin-based restorations, and the success of remineralization therapies.

In Vitro Investigation of the Effects of Various Reducing Agents on Dentin Treated with Hydrogen Peroxide.

We assessed the effect of non-protein thiols (NPSH), reduced glutathione (GSH) and n-acetylcysteine (NAC), on resin shear bond strength (SBS) to hydrogen peroxide (H2O2)-treated dentin, and their effects on the characteristics of dentin in comparison to ascorbic acid (AA) and sodium thiosulfate (STS). H2O2-treated dentin was conditioned with 5% AA, GSH, NAC, or STS applied for 1 or 5 min. The positive control group received H2O2 without antioxidant application, and the first negative control group received distilled water (DW). The specimens received resin bonding immediately after treatment except for the second negative control group (delayed bonding). Microhardness, roughness, and topography were studied. The SBS values of all antioxidants were statistically greater than the positive control group (p < 0.05); however, NAC and AA applied for 1 min demonstrated the highest values, which were comparable to delayed bonding. All treatments removed the smear layer except DW, H2O2, and STS. The negative effect of H2O2 on resin-dentin bonding was mitigated by the application of the antioxidants; however, their efficiencies were dependent on the antioxidant type and time of application. NAC was more effective in optimizing resin bonding to bleached dentin compared to GSH at 1 min application and STS at both application times but was comparable to AA. Negligible negative effects on the substrate's roughness and microhardness were detected. The antioxidant properties of the agent and its capacity to remove the smear layer are the processes underpinning the ability of a certain antioxidant to reverse the effect of H2O2 on bonding.

Exploring environmental sustainability in dentistry among students and educators in the United Arab Emirates: a cross-sectional survey.

OBJECTIVES: Creating environmentally sustainable healthcare culture within the dental field requires embedding the content in the dental curriculum at the undergraduate level. This study aimed to explore the current awareness and drivers among dental students and educators regarding environmentally sustainable dentistry (ESD) in the United Arab Emirates (UAE) and identify barriers and enablers to embrace it. METHODS: A cross-sectional survey using online questionnaires was carried out in six undergraduate dental education institutes within the UAE. Data analysis included descriptive statistics. RESULTS: In total 153 students and 53 educators participated in the survey. Most students and educators were not aware of any ESD content in their curricula. However, the majority of educators were familiar with the concept of ESD, while students were mostly unfamiliar or slightly familiar. Nonetheless, students largely agreed on its importance and their interest in learning it, as they viewed it relevant to their future practice. Educators agreed that the dental profession has a responsibility to be environmentally friendly and expressed their desire in introducing ESD content into the curricula. Several barriers were reported such as lack of knowledge, curricula space, educational resources, and time. Meanwhile, enablers included providing ESD capacity building, training and resources. CONCLUSIONS: There was no explicit presence of ESD content in the dental curricula in the UAE. Despite the lack of adequate awareness on this topic among educators and more so among students, they both had positive views towards incorporating ESD into dental curricula. Overall, this study highlighted the importance of promoting ESD in dental programs. CLINICAL SIGNIFICANCE: ESD is gradually becoming a critical aspect of modern oral healthcare system. It has been mandated in the dental curricula in several regions globally. Embedding ESD in the UAE dental curricula would have several benefits for the environment as well as the future of the dental profession in the region. The clinical significance includes, but not limited to, improved treatment outcomes; patients, students and staff health and well-being; reduced health risks, and cost savings.

Phytic acid effect on periodontal ligament fibroblast: An in-vitro study.

OBJECTIVES: This study evaluated phytic acid (IP6) effect on the viability, alkaline phosphatase (ALP) activity and calcium release of human periodontal ligament (HPDL) cells in optimal (OGL) and elevated glucose level (EGL) in cell culture media. MATERIALS AND METHODS: Cells were seeded in OGL (1000mg/L) or EGL (4500 mg/L) media. IP6 was added at 0.005%, 0.01% or 0.02% concentrations for 24 or 48h, and XTT assay was performed. Cell differentiation and calcium release in presence of 0.02% IP6 in OGL or EGL in non-osteogenic or osteogenic media were analyzed using ALP assay and alizarin red staining, respectively. RESULTS: In OGL, IP6 enhanced the viability of the cells at both exposure times (P<0.05). However, IP6 lowered the viability of the cells with the presence of EGL compared to the control at both exposure times, except for 0.02% IP6 which showed comparable viability to the control at 48 h. In OGL and EGL, ALP activity of the cells was not affected by the presence of IP6 in non-osteogenic media; however, in osteogenic media IP6 lowered the ALP activity. Meanwhile, calcium release was the highest with IP6 within osteogenic media of EGL. CONCLUSIONS: IP6 effects on the HPDL cells were dependent on IP6 concentration, time of exposure, glucose levels and the osteogenic condition of the media. CLINICAL RELEVANCE: This study gives insights on the potential therapeutic effect of IP6 as adjunctive periodontal therapy in patients with diabetes.

Thermal Sensing of Photo-Activated Dental Resin Composites Using Infrared Thermography.

OBJECTIVE: The goal of this study was to compare the pulp temperature increase during light curing of different composite thicknesses in deep class I cavities using two thermal sensing tools. METHODOLOGY: Round occlusal class I cavities with a remaining dentin thickness (RDT) of 1 mm from the cavity floor were performed on 15 extracted sound molars. Samples were divided into three groups (n = 5). In group A, cavities were restored using the Filtek Z350 XT conventional composite through the incremental filling technique, whereas group B cavities were restored using the Filtek Bulk-Fill flowable composite through the bulk-fill technique. Specimens of the Filtek Bulk-Fill flowable composite using the incremental filling technique were used to restore cavities in group C. An infrared thermal camera (IRT; Flir, Wilsonville, OR, USA) and K-type thermocouple (Perfect Prime TC0520, New York, NY, USA) were used to measure the heat generated during composite photo-polymerization. RESULTS: There were no significant differences within the same group using either the thermocouple or IRT (p > 0.05). One-way ANOVA showed no significant differences between groups A and C (p > 0.05), whereas group B was significantly different from groups A and C with each sensing tool (p < 0.05). CONCLUSION: IRT and thermocouple heat readings were comparable. Based on the current findings, the bulk-fill technique resulted in the lowest heat generation among the groups. Therefore, increasing the light-curing time and the number of composite increments was directly correlated with increases in intra-pulpal temperature.

Effect of an In-Office Bleaching Agent with Surface Pre-Reacted Glass-Ionomer Filler on the Enamel Surface: A In-Vitro Study.

In-office bleaching with high concentrations of hydrogen peroxide (H2O2) agents causes undesirable alterations in the enamel. Surface pre-reacted glass-ionomer (S-PRG) filler is a functional material known for its acid-neutralizing and demineralization-inhibition properties. This study evaluates the effect of S-PRG filler incorporation in H2O2-based bleaching on the enamel surface. Bovine enamel surfaces were bleached using a bleaching paste formulated with a liquid (35% H2O2) and a powder containing 5% or 10% S-PRG filler. The surface roughness and the Vickers microhardness of the treated enamel surfaces were evaluated. The enamel surfaces were observed under a scanning electron microscope (SEM) and analyzed using energy dispersive X-ray (EDX) technology. The surfaces were challenged by citric acid and observed by SEM. The specimens bleached with the paste containing the S-PRG filler showed lower enamel surface roughness and higher microhardness values than did those bleached with the plain paste (0% S-PRG filler); meanwhile, there were no significant differences between the 5% or 10% S-PRG filler groups. The S-PRG filler groups showed enamel surface morphologies similar to those of the non-bleached enamel, according to SEM observation, and EDX analysis detected the presence of fluoride and strontium ions. The S-PRG filler groups showed a higher resistance to erosion. The S-PRG filler mitigated the detrimental effects of bleaching agents on the enamel surface and provided resistance to erosion.

Retreatment of oval-shaped root canals filled with TotalFill bioceramic or AH plus sealer.

This study investigated retreatment of oval canals filled with gutta-percha and different sealers using WaveOne Gold (WOG). Single oval canals were prepared to size 30, 0.04 and obturated with gutta percha and AH Plus (AHP) or TotalFill bioceramic (TFBC) sealer. After 6-month incubation, the canals were retreated with WOG Primary (25, 0.07) under simulated body temperature, and the developed load and torque were simultaneously measured. The time and regaining the apical patency were checked. Micro-computed tomography scanning was performed to calculate the remaining obturating materials. An independent t-test and chi-square test were performed at a 95% confidence level. A shorter retreatment time was needed in TFBC than in AHP (P = 0.003). However, a higher maximum apical load was reported with AHP (P = 0.000). Meanwhile, comparable maximum coronal load and maximum torque values were observed. Apical patency was regained in all TFBC roots and only 75% of the AHP samples (P = 0.217). The remaining obturating materials were comparable in TFBC (13.02 ± 8.12%) and AHP (10.11 ± 8.46%) (P = 0.398). WOG was able to remove 89.89% and 86.98% of obturating materials in TFBC and AHP, respectively. The TFBC presented lower apical loads and faster retreatment compared to AHP.

The bleaching effect of office bleaching agents containing S-PRG filler evaluated by pH value and electron spin resonance.

OBJECTIVES: Surface reaction-type pre-reacted glass-ionomer (S-PRG) filler releases six types of ions with a neutralizing ability. This study evaluated the effect of S-PRG filler incorporation in an H2O2-based bleaching material on the bleaching efficacy, pH, and reaction state. MATERIALS AND METHODS: The experimental bleaching material was formulated by the addition of 5% or 10% S-PRG fillers to the powder part. The stained bovine teeth were treated with the prepared bleaching paste. Commission internationale de l'éclairage (CIE) L*a*b* color space values were recorded before and after bleaching, and the color difference (ΔE) and whiteness index (WID) were calculated. Moreover, the used bleaching formulations were assessed for their pH values and reaction state by evaluating the oxidation state of manganese (Mn+2) using electron spin resonance (ESR). RESULTS: The results of ΔE and WID showed that the addition of S-PRG filler increased the bleaching effect, but there was no significant difference between the groups with 5% and 10% S-PRG filler. A significant increase in pH in S-PRG filler groups (5% pH 6.7, 10% pH 6.8) was found compared to the 0% group (pH 4.8). ESR measurements showed that the signal emitted from Mn+2 decreased over time. The S-PRG filler groups showed a significantly higher reduction in Mn+2 compared to the 0% group, with no significant difference between the 5% and 10% S-PRG groups. CONCLUSIONS: S-PRG filler addition resulted in improved bleaching efficacy, higher reaction rate, and pH values that are close to neutral. CLINICAL RELEVANCE: S-PRG filler addition may be effective on the bleaching outcome of H2O2-based materials.

Phytic Acid Demonstrates Rapid Antibiofilm Activity and Inhibits Biofilm Formation When Used as a Surface Conditioning Agent.

Root canal infections are associated with biofilms and are treated with chemical irrigants with a high success rate. However, treatment failure does arise, which is attributed primarily to resistance exhibited by biofilms. Currently used irrigants in root canal treatment have disadvantages, and there is therefore a need for more biocompatible alternatives with antibiofilm properties to reduce root canal treatment failure and complications. The aim of this study was to evaluate the in vitro antibiofilm properties of phytic acid (IP6), which is a potential alternative treatment agent. Single- and dual-species biofilms of Enterococcus faecalis and Candida albicans were developed on the well surfaces of 12-well plates and on hydroxyapatite (HA) coupons, and then exposed to IP6. In addition, selected HA coupons were preconditioned with IP6 before biofilm development. IP6 demonstrated bactericidal effects and altered the metabolic activity of biofilm cells. Confocal laser-scanning microscopy showed that IP6 caused significant and rapid reduction in live biofilm cells. At sublethal concentrations, IP6 did not alter the expression of tested virulence genes except for C. albicans hwp1, the expression of which was upregulated but not reflected by a change in hyphal transformation. IP6-preconditioned HA coupons led to extensive inhibition of dual-species biofilm formation. The results of this study highlight for the first time the antibiofilm inhibitory properties of IP6 and the potential for its exploitation in several clinical applications. IMPORTANCE Root canal infections are biofilm associated, and despite mechanical and chemical treatment procedures, infection recurrence occurs, and this is likely due to the high tolerance of associated biofilms to antimicrobials. The currently used treatment agents have several disadvantages, which necessitates the search for new improved agents. In this study, the natural chemical phytic acid was found to exhibit antibiofilm activity against established mono and dual mature biofilms over a short contact time. Most importantly, phytic acid was found to cause significant inhibition of dual-species biofilm formation when used as a surface preconditioning agent. The findings of this study identified a novel use of phytic acid as a potential antibiofilm agent that can be used in several clinical applications.

In Vitro Optical and Physical Stability of Resin Composite Materials with Different Filler Characteristics.

The objective of this study was to compare the physical and optical stability of resin composite materials with different filler characteristics. Ninety-six resin composite blocks (6 mm × 6 mm × 2 mm) were prepared using four different types of resin composite, divided into four groups. Specimens from the same material were randomly divided into four groups (n = 6) and allocated for Vickers hardness (VH), water sorption, solubility (WS/SL), and staining and aging challenges tests. One-way ANOVA showed significant differences in microhardness (p = 0.0001), WS (p = 0.0001), and SL (p = 0.003) among the tested groups. Beautifil II LS recorded the highest hardness, and CharmFil®Flow had the lowest value. Beautifil Injectable X and II LS showed negative WS, whereas the other groups had positive values. All groups showed positive SL. Repeated measures ANOVA showed significant color parameter alteration in the tested groups (p = 0.0001). All groups showed significant color shifting after one week of the staining challenge. Repeated measures ANOVA showed a significant color parameter (p = 0.0001) and weight (p = 0.001) alteration after the aging challenge. The optical and physical stability of resin composites may vary according to filler characteristics. Clinicians should choose the composite as per the desired outcome.

Effect of different chelating agents on the shear bond strength of calcium silicate-based cements to coronal dentin.

We evaluated the shear bond strength (SBS) of mineral trioxide aggregate (MTA) and Biodentine (BD) to coronal dentin after treatment with ethylenediaminetetraacetic acid (EDTA), phytic acid (IP6), or etidronic acid (HEDP). Sodium hypochlorite-treated dentin surfaces were randomly divided into four groups according to conditioning protocol namely, 17% EDTA, 2.5% IP6, 9% HEDP, or distilled water (DS). Specimens were further divided according to the type of cement placed on conditioned dentin and SBS was tested. The results showed that DS/MTA and IP6/MTA groups had the highest values, and there was no significant difference between these two groups. IP6/BD group showed a lower SBS value compared to IP6/MTA; however, this did not reach the level of significance. The BS to dentin was influenced by the type of calcium silicate material and chelating agent. IP6 either improved or maintained the bonding while EDTA and HEDP showed a negative or no influence effect.

Tinnitus Prevalence and Associated Factors among Dental Clinicians in the United Arab Emirates.

Dental clinicians are at increased risk for developing tinnitus due to exposure to high levels of occupational noise. This study aimed to determine tinnitus prevalence and associated factors among dental clinicians. Interviews were conducted with 150 randomly selected dental clinicians using a questionnaire. Noise levels were measured at three points of time at the operating area. Tinnitus was reported in 19.33% of the participants. The average noise level was significantly higher among participants with tinnitus compared to those without the condition. More participants complained of intermittent tinnitus and the rest had the constant type, with the latter being significantly more bothersome. The weekly average time of using high-speed handpieces, suction and electric handpieces, age and experience had a significant effect on the presence of tinnitus. Only 2.7% of the participants reported the use of a hearing protection device. Tinnitus is a common finding among dental clinicians especially those with higher levels of occupational noise and more frequent use of noise-generating equipment. Knowledge of tinnitus prevalence aids in realizing the extent of its impact and making informed decisions. These results call for improved awareness of the negative impact of clinically-generated noise and emphasize the importance of preventive measures and periodic audiometry exams.

The Blending Effect of Single-Shade Composite with Different Shades of Conventional Resin Composites-An In Vitro Study.

OBJECTIVES: Single-shade composite systems are gaining popularity among clinicians due to the claimed potential of blending with different tooth structure shades while restoring the tooth. The purpose of this study was to evaluate the blending effect of two single-shade composite with different shades of conventional resin composite systems. MATERIALS AND METHODS: Seventy-two composite cylinders of B1, B2, A1, A2, A3, or A3.5 shade from CharmFil Plus (CP) and Filtek Universal Restorative (3M) were prepared using custom-made silicone mold. Single-shade composite OMNICHROMA (OC) or Beautifil II Enamel (BE) was placed in the center of each cylinder and polymerized. The color parameters, lightness (L*), chroma (C*), and hue (H*) of each composite were measured using a color chronometer. Furthermore, color stability of the samples was evaluated after 1-week staining challenge. STATISTICAL ANALYSIS: Multivariant analysis was performed to evaluate the effect of material and shade on the color parameters. Multiple comparisons of the data were performed using post hoc test. The staining challenge data were analyzed using repeated measure analysis of variance and paired sample T-test. RESULTS: The multivariant analysis showed a statistically significant difference in color parameters among CP, 3M, OC, and BE (p = 0.001). Image analysis showed a visual blending effect for both OC and BE for certain shades; however, some color contrast with the darker shades was observed. The C* value of OC showed a similar pattern to CP; however, the H* of the latter was closely followed by BE. The L* value showed statistically significant difference among the shades of 3M, and in OC and BE when blended with 3M. CONCLUSION: All four materials used in this study showed color alteration after the staining challenge. Single-shade composite can blend with only certain shades of resin composites.

Effect of phytic acid on dentinal collagen solubilization and its binding and debinding potentials to dentin.

OBJECTIVES: To study phytic acid (IP6) effect on collagen solubilization by assessing hydroxyproline (HYP) release, evaluate its binding to demineralized (DD) and mineralized dentin (MD) and determine the effect of different media on debinding of IP6. METHODS: Demineralized dentin beams were incubated in 1%, 2% or 3% IP6 and HYP release was evaluated at 1 or 3 weeks and compared to those obtained in untreated control or phosphoric acid (PA)-treated beams. DD or MD powder was treated with 1%, 2% or 3% IP6 and the decrease in IP6 amount was quantitated by ultraviolet-visible spectroscopy. IP6-treated samples were re-suspended in distilled water, ethanol, urea or sodium chloride and the amount of IP6 displaced was determined. RESULTS: At 1 week, the control group and IP6 showed lower HYP release when compared to PA (P < 0.05). There was no difference among PA, IP6 and control at 3 weeks (P = 0.22). IP6 binding was concentration dependent. 1% IP6 had higher binding potential with MD compared to DD while 2% IP6 showed the opposite result (P<0.05). 3% IP6 had similar binding values between DD and MD (P = 0.53). The highest debinding in MD occurred with urea for 2%, 3% and 1% IP6 in descending manner. Within each concentration of IP6 in DD, the highest debinding effect was reported with ethanol. CONCLUSIONS: IP6 bound to DD and MD in a concentration-dependent manner. IP6 was debound from DD mostly by the action of ethanol, while in MD, urea caused the most displacement. Collagen solubilization of IP6-treated DD was comparable to untreated DD. CLINICAL SIGNIFICANCE: These findings add to the potential use of IP6 as an alternative to PA for dentin etching which possibly results in long-term stability of resin-dentin adhesion.

In Vitro Cytotoxicity and Mineralization Potential of an Endodontic Bioceramic Material.

OBJECTIVE: The interest in bioceramic materials has been steadily growing for different applications in endodontics. With the continued introduction of new bioceramic-based materials into the market, it is of great importance to assess the biocompatibility before providing recommendations on their clinical use. This study evaluated the in vitro cytotoxicity and mineralization potential of two consistencies of unset premixed bioceramic material (TotalFill BC RRM putty and TotalFill BC sealer) compared with an epoxy resin-based sealer (AH Plus) on osteoblast cells. MATERIALS AND METHODS: Overall, 100% extracts were obtained by weighing 0.1 g of each material in 1 mL of cell culture media. Primary human osteoblast (HOB) cells (n = 4) were treated with different concentrations (100, 50, 25, 12.50, and 6.25%) of each extract. XTT assay and Alizarin Red S staining were used to evaluate the cytotoxic effect and the biomineralization potential, respectively. STATISTICAL ANALYSIS: Data were analyzed by one-way analysis of variance followed by Tukey's post hoc tests. RESULTS: The cytotoxicity assay after 24 h treatment showed that all materials at high concentrations of the extract (100 and 50%) were toxic to HOB (p < 0.001). On the contrary to TotalFill BC RRM Putty, AH Plus and TotalFill BC sealer were toxic at 25% concentration. However, at 12.5% concentration and lower, all materials were nontoxic. The mineralization potential analyzed after 7 and 14 days showed that TotalFill BC material-treated cells could deposit mineralized nodules in the normal and osteogenic medium unlike AH plus-treated cells. CONCLUSION: At low concentrations, TotalFill BC materials showed higher biocompatibility to HOB cells than AH Plus, enhanced the viability of the cells, maintained their typical morphology, and induced the formation of mineralized nodules. Despite the encouraging data, clinical trials are needed to identify the effect of this material on the long-term outcome of endodontic treatment.

Assessment of the educational value of endodontic access cavity preparation YouTube video as a learning resource for students.

OBJECTIVE: To evaluate the educational value of YouTube as a learning tool for dental students regarding endodontic access cavity preparation. METHODS AND FINDINGS: YouTube search was made for videos related to endodontic access cavity preparation using specific terms. After exclusions, 41 videos were chosen and assessed for tooth type, video length, days since upload, country of origin, number of views and likes, source of authorship, and viewing rate. To grade the content of videos, a usefulness score with seven elements was developed. Each element was given a score of 0 or 1. Statistical tests were run by using Kruskal-Wallis and Mann-Whitney tests (SPSS Inc, Chicago, IL, USA) at a 5% significance level. The videos received a mean of 181198.5 views with a mean duration of 686.1 seconds. The mean number of "likes" was 1047.8. Almost half of the videos covered content related to molar teeth. Most videos were provided by health care professionals with almost 50% uploaded from India. The mean usefulness score was 4.29 (range: 1-7) and the most discussed elements were description, instruments used, access cavity demonstration, and evaluation criteria. About a quarter of the videos were classified as good, while 46.3% as moderate and 29.3% as poor. Among the content usefulness categories, no difference was found in the video demographics (p>0.05) except "days since upload" (p = 0.018) in which good quality videos were found to have the highest median. Moreover, although insignificant, good videos were found to have the longest duration and lowest number of views, likes, and viewing rate. The mean usefulness score of videos released during the COVID-19 pandemic was lower than that for pre-pandemic videos (p = 0.042), and videos uploaded by academic institutions had a higher mean usefulness score than videos uploaded by health care professionals (p<0.001). CONCLUSIONS: Information on endodontic access cavity preparation is not comprehensive in most of the reviewed YouTube videos and could be of low educational value.

Assessment of Bioceramic Sealer Retreatability and Its Influence on Force and Torque Generation.

This study assesses the retreatability of TotalFill bioceramic (TFBC) and AH Plus (AHP) sealers and their impact on retreatment force and torque. Twenty-six premolar teeth with single oval canals were instrumented, obturated using the matched gutta-percha cone technique with one of the tested sealers, and then temporized. After a 6-month incubation at 37 °C and 100% humidity, the canals were retreated with the XP Shaper system. During retreatment, the generated force and torque were measured. Micro-CT scanning was run before and after the retreatment procedure to analyze the remaining obturating materials in the canals. The apically directed maximum force in AHP was higher than that in TFBC. The coronally directed maximum force and the maximum torque were comparable between the groups. A higher amount of remaining obturating materials was found in the AHP compared to that in the TFBC. Based on these findings, endodontic sealer had an influence on retreatability, and the TFBC showed less remaining obturating materials and lower retreatment forces in the apical direction compared to the AHP in extracted teeth with oval canals.

Evaluation of YouTube videos for patients' education on periradicular surgery.

The aim of this study was to evaluate the content of periradicular surgery-related YouTube videos available for patients' education. YouTube search was made for videos related to periradicular surgery using specific terms. After exclusions, 42 videos were selected, viewed and assessed by two independent observers. The videos were assessed in terms of duration, days since upload, country of upload, number of views, likes and dislikes, authorship source, viewing rate and interaction index. To grade the content of videos about periradicular surgery, a usefulness score was created with 10 elements based mainly on the American Association of Endodontists guidelines. Each element was given a score of 0 or 1. SPSS software (SPSS Inc, Chicago, IL, USA) was used to analyze data at a 95% confidence level. An inter-evaluator reliability analysis for the scoring system was performed using the Kappa statistic. The videos received an average of 35103.9 views (range: 9-652378) with an average duration of 338.71 seconds (range: 42-2081), respectively. Most videos were provided by individuals (57%). Half of the videos were posted by authors from the United States. The inter-evaluator reliability for usefulness scoring was 94.5%. No video covered the 10 scoring elements completely, presenting very low usefulness scores (mean: 3.2; range: 1-7). The most discussed elements were supporting media (100%) and steps of the procedure (90.5%) followed by indications and contraindications (45.2%) and symptoms (31%). None of the included videos discussed the procedure's cost or prognosis. In terms of usefulness score, no significant difference was detected between different sources of upload (chi-square test, P > 0.05). Information on periradicular surgery in YouTube videos is not comprehensive and patients should not rely on YouTube as the only source of information. Dental professionals should enrich the content of YouTube with good quality videos by providing full and evidence-based information that will positively affect patients' attitudes and satisfaction.

Antimicrobial Activity of Phytic Acid: An Emerging Agent in Endodontics.

Background: Phytic acid (IP6) is a promising and emerging agent, and because of its unique structure and distinctive properties, it lends itself to several applications in dentistry. Recently, IP6 was proposed as a potential chelating agent in endodontics. However, there is limited knowledge regarding its antimicrobial and antibiofilm effectiveness. The aims of this study, were therefore to evaluate the antimicrobial and antibiofilm activities of IP6 against a range of microbial species and compare these with ethylenediaminetetraacetic acid (EDTA) and sodium hypochlorite (NaOCl). The contact time required for IP6 to exert its bactericidal effect on Enterococcus faecalis was also determined. Methods: The inhibitory and biocidal activities of IP6, EDTA and NaOCl were assessed using a broth microdilution assay against 11 clinical and reference strains of bacteria and a reference strain of Candida albicans. The contact time required for various IP6 concentrations to eliminate planktonic cultures of E. faecalis was determined using a membrane filtration method according to BS-EN-1040:2005. IP6 bactericidal activity was also evaluated using fluorescent microscopy, and the antibiofilm activity of the test agents was also determined. Results: IP6 was biocidal against all tested microorganisms. At concentrations of 0.5%, 1% and 2%, IP6 required 5 min to exert a bactericidal effect on E. faecalis, while 5% IP6 was bactericidal after 30 s. IP6 also eradicated biofilms of the tested microorganisms. In conclusion, IP6 had notable antimicrobial effects on planktonic and biofilm cultures and exhibited rapid bactericidal effects on E. faecalis. This research highlighted, for the first time the antimicrobial and antibiofilm properties of IP6, which could be exploited, not only in dental applications, but also other fields where novel strategies to counter antimicrobial resistance are required.

Effect of smear layer removal agents on the microhardness and roughness of radicular dentin.

PURPOSE: To evaluate the effect of phytic acid (IP6) on the surface roughness and microhardness of human root canal dentin and compare it to other smear layer removal agents. MATERIALS AND METHODS: Fifty extracted human maxillary incisors were sectioned longitudinally into a total of 100 specimens followed by embedding in auto-polymerizing acrylic resin. The specimens were polished and then randomly divided into five groups (n = 20) according to the test solution used to condition root canal dentin: 17% ethylenediaminetetraacetic acid (EDTA); 10% citric acid (CA); 1% IP6; 37% phosphoric acid (PA); or distilled water (control group). Each specimen was treated with a total volume of 1 ml of each solution for 1 min with agitation. Each group was then divided into two subgroups of 10 specimens each. The specimens of the first subgroup were used to determine microhardness, using Vickers hardness tester, and the specimens of the second subgroup were used to measure surface roughness, using a confocal laser scanning microscope. The results were analyzed statistically using one-way ANOVA and Tukey tests, α = 0.05. RESULTS: All the tested groups exhibited microhardness and surface roughness values that were statistically significantly different when compared with the control group (P < 0.05). The microhardness value obtained with IP6 was significantly lower when compared to EDTA, CA, and the control group, whereas its roughness value was significantly higher compared to the aforementioned groups. However, there was no significant difference between IP6 and PA (P > 0.05). CONCLUSIONS: IP6 and PA showed the lowest microhardness and the highest surface roughness values.