Investigation of microbial fuel cell performance based on the nickel thin film modified electrodes.

Microbial fuel cells (MFCs) are a self-sustaining and environmentally friendly system for the simultaneous was tewater treatment and bioelectricity generation. The type and material of the electrode are critical factors that can influence the efficiency of this treatment process. In this study, graphite plates and carbon felt were modified through the electrodeposition of nickel followed by the formation of a biofilm, resulting in conductive bio-anode thin film electrodes with enhanced power generation capacity. The structural and morphological properties of the electrode surfaces were characterized using X-ray diffraction, energy-dispersive X-ray spectroscopy, elemental mapping, and field-emission scanning electron microscopy techniques. Maximum voltage, current density, and power generation were investigated using a dual-chamber MFC equipped with a Nafion 117 membrane and bio-nickel-doped carbon felt (bio-Ni@CF) and bio-nickel-doped graphite plate (bio-Ni@GP) electrodes under constant temperature conditions. The polarization and power curves obtained using different anode electrodes revealed that the maximum voltage, power and current density achieved with the bio-Ni@CF electrode were 468.0 mV, 130.72 mW/m2 and 760.0 mA/m2 respectively. Moreover, the modified electrodes demonstrated appropriate stability and resistance during successful runs. These results suggest that nickel-doped carbon-based electrodes can serve as suitable and stable supported catalysts and conductors for improving efficiency and increasing power generation in MFCs.

A review on bio-electro-Fenton systems as environmentally friendly methods for degradation of environmental organic pollutants in wastewater.

Bio-electro-Fenton (BEF) systems have been potentially studied as a promising technology to achieve environmental organic pollutants degradation and bioelectricity generation. The BEF systems are interesting and constantly expanding fields of science and technology. These emerging technologies, coupled with anodic microbial metabolisms and electrochemical Fenton's reactions, are considered suitable alternatives. Recently, great attention has been paid to BEFs due to special features such as hydrogen peroxide generation, energy saving, high efficiency and energy production, that these features make BEFs outstanding compared with the existing technologies. Despite the advantages of this technology, there are still problems to consider including low production of current density, chemical requirement for pH adjustment, iron sludge formation due to the addition of iron catalysts and costly materials used. This review has described the general features of BEF system, and introduced some operational parameters affecting the performance of BEF system. In addition, the results of published researches about the degradation of persistent organic pollutants and real wastewaters treatment in BEF system are presented. Some challenges and possible future prospects such as suitable methods for improving current generation, selection of electrode materials, and methods for reducing iron residues and application over a wide pH range are also given. Thus, the present review mainly revealed that BEF system is an environmental friendly technology for integrated wastewater treatment and clean energy production.

Effect of different concentrations of substrate in microbial fuel cells toward bioenergy recovery and simultaneous wastewater treatment.

Microbial fuel cells (MFCS) is a promising and expanding technology able to eliminate various pollutants of wastewater while converting its chemical energy into power energy using biocatalysts. The potential application of double-chamber microbial fuel cell (DC-MFC) for chemical oxygen demand (COD) removal and generated power from wastewater in the different conditions is investigated. DC-MFC is operated with anaerobic sludge as an active biocatalyst in an anode section, an aerobic cathode section and a Nafion117 membrane as a separator. The performance of the bioreactor is determined with different concentrations of chemical oxygen demand (COD) loadings in the MFC process, in terms of COD removal, power generation and columbic efficiencies. The results illustrated that COD removal efficiency increased at the high concentrations of organic matter. So that at COD concentration of 2000.0 mg/L the highest COD removal efficiency (84%) was obtained. But with increasing substrate initial concentration to 10000.0 mg/L the efficiency decreased to 79%. The important outputs of the system like the highest voltage, maximum generated power, current density, and energy efficiency with the 100,000 mg/L COD are 447 mV, 50.7 mW/m2, 570.0 mA/m2, and 18.6%, respectively. The optical density levels increased due to bacterial growth while pH severely decreased in the anode chamber when using high-concentration substrates in the MFC.

A novel bio-electro-Fenton system with dual application for the catalytic degradation of tetracycline antibiotic in wastewater and bioelectricity generation.

In this new insight, the potential application of the eco-friendly Bio-Electro-Fenton (BEF) system was surveyed with the aim of simultaneous degradation of tetracycline and in situ generation of renewable bioenergy without the need for an external electricity source. To shed light on this issue, catalytic degradation of tetracycline was directly accrued via in situ generated hydroxyl free radicals from Fenton's reaction in the cathode chamber. Simultaneously, the in situ electricity generation as renewable bioenergy was carried out through microbial activities. The effects of operating parameters, such as electrical circuit conditions (in the absence and presence of external resistor load), substrate concentration (1000, 2000, 5000, and 10 000 mg L-1), catholyte pH (3, 5, and 7), and FeSO4 concentration (2, 5, and 10 mg L-1) were investigated in detail. The obtained results indicated that the tetracycline degradation was up to 99.04 ± 0.91% after 24 h under the optimal conditions (short-circuit, pH 3, FeSO4 concentration of 5 mg L-1, and substrate concentration of 2000 mg L-1). Also, the maximum removal efficiency of anodic COD (85.71 ± 1.81%) was achieved by increasing the substrate concentration up to 2000 mg L-1. However, the removal efficiencies decreased to 78.29 ± 2.68% with increasing substrate concentration up to 10 000 mg L-1. Meanwhile, the obtained maximum voltage, current density, and power density were 322 mV, 1195 mA m-2, and 141.60 mW m-2, respectively, at the substrate concentration of 10 000 mg L-1. Present results suggested that the BEF system could be employed as an energy-saving and promising technology for antibiotic-containing wastewater treatment and simultaneous sustainable bioelectricity generation.