The skeletal response to matt and polished cemented femoral stems.

We studied the effect of the surface finish of the stem on the transfer of load in the proximal femur in a sheep model of cemented hip arthroplasty. Strain-gauge analysis and corresponding finite-element (FE) analysis were performed to assess the effect of friction and creep at the cement-stem interface. No difference was seen between the matt and polished stems. FE analysis showed that the effects of cement creep and friction at the stem-cement interface on femoral strain were small compared with the effect of inserting a cemented stem.

Radiographic and histologic analysis of cemented double tapered femoral stems.

The macroscopic, radiographic, and histologic features of the prosthesis-cement and cementbone interfaces and adjacent bone were studied in 21 cemented hemiarthroplasties in sheep that had lived until sacrifice at 9 months. The features were compared with those immediately after implantation of the stem in the contralateral femur. The femoral stem was a double taper that was either polished collarless, matte collarless, or matte collared. There was no prosthesis to cement debonding or cement to bone radiolucent line immediately after implantation, and there was excellent interdigitation at the cement-bone interface. After 9 months there was no evidence of prosthesis to cement debonding and no stem with definite loosening. At 9 months after implantation there was evidence of bone remodeling with new bone filling what were presumed to be gaps at the cement-bone interface from immediately after implantation. Radiolucent lines at the cement-bone interface were found to represent trabeculation of the cortical bone rather than the presence of a complete fibrous interface, which was not seen. There was no difference between stem types. Sheep have been shown to be useful in a model of cemented hip arthroplasty and, although no differences were seen between stem types at 9 months after implantation, long term differences cannot be excluded.

Direct measurement of hoop strains in the intact and torn human medial meniscus.

OBJECTIVE: To measure the circumferential or hoop strains generated in the medial meniscus during loading of the knee joint and to examine the effect of longitudinal and radial tears in the meniscus on these strain values. DESIGN: An in vitro investigation measuring the circumferential strains in the medial menisci of cadaveric human knees as they were loaded in a materials testing machine. BACKGROUND: The menisci transmit approximately 50% of the load through the knee, the rest being transmitted by direct contact of the articular cartilage. Damage to the menisci will alter the pattern of load transmission as will meniscectomy. This study examined the changes in the mechanics of the meniscus in situ as a result of simulated tears to assess the effect of its load carrying capacity and the implications of surgery to remove part or all of a damaged meniscus. METHODS: Nineteen human cadaveric knees were tested. Windows were made in the joint capsule and strain gauges inserted into the anterior, middle and posterior sections of the medial meniscus. The knees were then loaded to three times body weight at speeds of 50 and 500 mm/min, with the knee joint at 0 degrees and 30 degrees of flexion. The tests were repeated following the creation of a longitudinal or a radial tear in the meniscus. RESULTS: The intact menisci showed significantly less strain in the posterior section compared to the anterior and middle sections (P < 0.003, with strains of 1.54%, 2.86% and 2.65% respectively). With a longitudinal tear this pattern changed with strains decreasing anteriorly and increasing posteriorly. There were also significant differences at different angles of knee joint flexion not seen in the intact meniscus. 50% radial tears reduced the strains anteriorly whilst a complete radial tear completely defunctioned the meniscus. CONCLUSIONS: This study has shown that there are significantly different hoop strains produced in different sections of the medial meniscus under load and the patterns of strain distribution are disturbed by meniscal tears. RELEVANCE: These results provide important data for mathematical models which must include non-uniform behaviour. They also have implications for the surgical management of torn menisci. Undamaged portions should be preserved and the integrity of the circumferential fibres maintained to ensure the menisci retain a load bearing capability.

Mechanical properties of the human anterior cruciate ligament.

The aim was to measure the stiffness and strength of the femur-anterior cruciate ligament-tibia complex tested in a physiological manner with a force exerted anteriorly on the tibia, at knee joint flexion angles of 0 degrees, 10 degrees and 30 degrees and at speeds of 50 and 500 mm/min. Ligaments were preconditioned by cycling five times, with data from the fifth cycle used to determine the stiffness of the ligament in a low-load range. The ligaments were then tested to failure with the knee at 30 degrees flexion. The specimens were divided into two groups, middle-aged (40-60) and old (>60). For each group no statistical difference was observed between stiffness of the ligament at different joint flexion angles or speeds. Seven of the 21 specimens in the older age group failed by avulsion at the bone-ligament interface. All the other specimens failed by tears in the substance of the ligament. Ultimate failure load was found to have a significant correlation with bodyweight. It was 1.6 and 1.3 times bodyweight for the middle-aged and older age groups respectively. This study has highlighted the importance of identifying different modes of failure, of making corrections for bodyweight and testing in a physiological manner. The results allow a better understanding of the mechanical behaviour of the anterior cruciate ligament and provide design data for anterior cruciate ligament grafts and prostheses. RELEVANCE:--Our clinical experience indicates that the anterior cruciate ligament is frequently ruptured during uncoordinated contraction of the quadriceps mechanism. The results of this study, in which the mechanical properties of the anterior cruciate ligament have been measured with force exerted anteriorly on the tibia, allow a more complete understanding of the mechanical behaviour of the anterior cruciate ligament and provide design data for anterior cruciate ligament grafts and prostheses.

Failure strengths of different meniscal suturing techniques.

The aim of this study was to measure the failure strengths of three arthroscopic meniscal suturing methods. The techniques investigated were a single horizontal loop, a double vertical loop, and a single vertical loop. Eleven human, lateral menisci obtained at autopsy were cut with a scalpel to simulate peripheral longitudinal tears. The menisci were then repaired with one suture at a time, using each of the three methods in turn. The two parts of the meniscus were then pulled apart using a computer-controlled materials testing machine until failure occurred, either by the suture itself failing or by the suture pulling out because of tearing of the meniscus. The horizontal sutures had a mean failure strength of 29.3 N, whereas the double vertical loop failed at 63.2 N and the single vertical loop at 67.3 N. The horizontal loop sutures and the double vertical loop sutures all failed by pulling out of the meniscus. The single vertical loop sutures failed by rupture of the suture itself. This study showed the superior mechanical characteristics of the single vertical loop suturing system over the other techniques tested. Owing to the more consistent failure strength, decreased costs, and shorter surgical time over the double vertical loop system, the single vertical loop technique is recommended for arthroscopic meniscal repair.