Effect of sorghum pre-processing (roasting and germination) on the replacement level and quality of sorghum-wheat bread: bread characteristics, digestibility, consumer acceptability and microbiological analysis.

Abstract: The present study was focused on the replacement of refined wheat flour (RWF) by control (CS) and processed sorghum flour [germinated (GS) and roasted (RS)] on the properties of flour/batter/dough (particle size, XRD, pasting, dynamic rheology, farinograph) and bread (physical, textural, digestibility, microbiological and sensory). Prominent variations adhered with sorghum processing, but decreasing patterns occurred for flour-water absorption, dough stability times, storage modulus, peak/final/breakdown viscosities, bread-moisture content, specific volume, porosity, and lightness. Flour's pasting temperature, dough development time, breadbulk density, hardness, gumminess, and bitterness increased. Composite flours mainly had weak nature compared to RWF. The baking loss was lower for 10-30% CS and GS incorporation than RS. Composite bread had higher in-vitro protein and starch digestibility (CS > GS > RS) than RWF. Three days storage life with acceptable quality scores was obtained for bread with CS and GS up to 20% and RS up to 30% incorporation. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05810-3.

Recent trends and applications of evacuated tube solar collector in food processing and air heating: a review.

Solar energy demand is growing for future energy needs in different sectors to replace fossil fuels, which leads to a reduced carbon footprint and global warming. Evacuated tube solar collectors (ETSC) harness solar thermal energy for air heating, water heating, and drying in domestic and industrial sectors. The review paper comprises ETSC technology categorization, influencing factors like fin arrangement, integration of phase change material, tilt angle, solar radiation, and airflow rate on the performance of ETSC-based solar air heaters and dryers. The thermal performance parameters, like the collector efficiency, dryer efficiency, energy and exergy efficiency, thermal profile, zone temperature, relative humidity, heat loss during operations, etc., are reviewed. The developed ETSC-based air heating systems and solar dryers for drying agricultural products are performed effectively. However, research progress on improving the thermal performance integrated with nanofluids and phase change materials was discussed. CO2 mitigation analysis and global standards for ETSC-based air heaters and dryers are compiled. A large scope exists by use of solar air heaters (SAH) for food commodity drying with a suitable drying chamber and improving the designs of ETSC-based solar dryers. The work accomplished by various researchers has been analyzed in this study for prospective research gaps in the context of future design and development.

Apricot kernel characterization, oil extraction, and its utilization: a review.

Apricot (Prunus armeniaca L.) kernels, one of the economical stone fruit kernels, are utilized worldwide for edible, cosmetic, and medicinal purposes. Oil from the apricot kernel is valued by the richness of unsaturated fatty acids, the high proportion of oleic acids, phenols, and tocopherol content. Oil yield with quality from apricot kernel varies with region, variety, and adopted method of oil extraction. This review discusses apricot kernel characterization, different conventional and novel methods of oil extraction, their merits and demerits as reported in the literature. Novel technologies such as microwave-assisted oil extraction, ultrasound-assisted oil extraction, enzyme-assisted oil extraction, and supercritical fluid oil extraction have emerged as the most promising extraction methods that allow efficient oil recovery in very environment-friendly ways. Knowledge of the extraction technique aids in giving higher oil recovery with minimal nutritional losses while retaining the original organoleptic properties.

Bread preparation by partial replacement of wheat by germinated sorghum.

Published literature shows significant impact of sorghum type and flour on end-product quality, while demonstrating paucity in the studied varieties with respect to processing aspects (such as bread making) despite of enormous accessions available worldwide. Limited studies have reported usage of germinated flour for the above said purpose. The present study thus aimed at mitigating these gaps by utilizing results of sorghum (HJ-513) germination (Day 1-5) and flour derived from optimized condition (Day 3 as identified by partial least square analysis) to develop a composite functional bread (partial replacement of wheat). The germination process enhanced the total phenolics compounds (TPC, till day 3), water (14.01%) and oil absorption capacity (25.97%) while reducing the bulk density (760.99-644.69 kg/m3). This demonstrated increased potential of sorghum flour for development of bakery and confectionery products. The process also affected the pasting properties, total flavonoids compounds (TFC) and DPPH (2, 2-diphenyl-1-picrylhydrazyl) significantly (p < 0.05). The bread developed from partial replacement (10% and 20%) of refined wheat flour by sorghum was hard and darker than the control wheat bread. The bread developed at 20% was more dense and porous than the bread developed with 10% replacement. Specific volume of bread at 10% replacement was found higher than at 20% replacement. The study reports effective utilization of germinated sorghum flour for development of composite-functional bread without incorporation of any other additives/improvers. Future research however is warranted in the field to further increase the replacement of wheat flour by germinated sorghum flour to develop gluten free bread.

Optimization of the frying process in relation to quality characteristics of Khaja (A traditional sweet).

The present study was focused on the optimization of process parameters and quality characterization of Khaja. A full factorial design 53 was applied using different levels of fat proportions (5-25%), frying temperature (160-200 °C), and frying time (1-5 min). The response optimizer function in Minitab 18 software was used to select five samples with the highest desirability which were then subjected to sensory analysis. The lightness of the samples decreased significantly (P ˂ 0.05) from 68.59 to 43.33 whereas, redness increased significantly (P ˂ 0.05) from 0.26 to 11.48 with increasing levels of all independent variables. Water activity and moisture content of the samples decreased significantly (P ˂ 0.05) from 0.75 to 0.21 and 14.41-1.40%wb respectively, whereas total fat content increased significantly (P ˂ 0.05) from 25.05 to 45.7% with increasing levels of independent variables. The hardness of the samples significantly (P ˂ 0.05) varied from 60.45 to 7.69 N. The sensory analysis revealed that the sample with 20% fat proportion, fried at 180 °C for 4 min, scored maximum in overall acceptability. The microstructural images revealed the structural damage and formation of pores in fried samples. The fatty acid analysis showed higher saturated fatty acids in market samples than in optimized samples. The results of the study concluded that fat proportion and frying parameters (temperature and time) are crucial for a better understanding of the deep-frying process of Khaja in order to achieve good quality. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05509-x.

Gluten-free grains: Importance, processing and its effect on quality of gluten-free products.

Gluten-enteropathy affects a significant number of people, making gluten a major concern in the food industry. With medical advancements, the diagnosis of allergies is becoming easier, and people who are allergic to gluten are recommended a complete gluten-free diet. Since wheat provides a major part of the energy and nutrition in the diet, its elimination affects nutrition intake of allergic population. Food scientists are working to formulate products using protein-rich gluten-free grains with quality attributes at par with gluten-containing products. Focused research has been done to provide nutrition and a variety of food to people suffering from gluten-related disorders. Efforts are being made to remove the gluten from the wheat and other gluten-containing grains, while applying different processing/treatments to enhance the properties of gluten-free grains. Hence, the present review summarizes the importance, processing, and products of different gluten-free grains. It also highlights the digestibility of gluten-free grains with clinical trials and gluten elimination strategies for gluten-containing grains.

Recent advances in valorization of citrus fruits processing waste: a way forward towards environmental sustainability.

Citrus fruits are well known for their medicinal and therapeutic potential due to the presence of immense bioactive components. With the enormous consumption of citrus juice, citrus processing industries are focused on the production of juice but at the same time, a large amount of waste is produced mainly in the form of peel, seeds, pomace, and wastewater. This waste left after processing leads to environmental pollution and health-related hazards. However, it could be exploited for the recovery of essential oils, pectin, nutraceuticals, macro and micronutrients, ethanol, and biofuel generation. In view of the importance and health benefits of bioactive compounds found in citrus waste, the present review summarizes the recent work done on the citrus fruit waste valorization for recovery of value-added compounds leading to zero wastage. Therefore, instead of calling it waste, these could be a good resource of significant valuable components, in this way encouraging the zero-waste theory.

Quality characteristics of sand, pan and microwave roasted pigmented wheat (Triticum aestivum).

Present study investigated the effect of sand, pan and microwave roasting on physico-chemical, functional and rheological properties of yellow (YW), purple (PW), and black wheat (BW). All roasting methods enhanced the browning index (BI), water absorption capacity (WAC) and oil absorption capacity (OAC) roasted wheat flour. Microwave roasting showed significantly higher impact on BI (58.61% for YW, 131% for BW and 83.85% for PW) and WAC (47.93% for YW, 44.63% for BW and 32.09% for PW). However, the decrease in density, emulsifying capacity (EC), foaming capacity (FC), total phenolic content (TPC), total flavonoid content (TFC), and total anthocyanin content (TAC), and antioxidant activity was observed on roasted wheat flour. Roasting also affected the pasting properties of wheat flours and peak, trough, breakdown and final viscosity decreased.

Microbial inactivation by high pressure processing: principle, mechanism and factors responsible.

High-pressure processing (HPP) is a novel technology for the production of minimally processed food products with better retention of the natural aroma, fresh-like taste, additive-free, stable, convenient to use. In this regard safety of products by microbial inactivation is likely to become an important focus for food technologists from the research and industrial field. High pressure induces conformational changes in the cell membranes, cell morphology. It perturbs biochemical reactions, as well as the genetic mechanism of the microorganisms, thus ensures the reduction in the microbial count. Keeping in view the commercial demand of HPP products, the scientific literature available on the mechanism of inactivation by high pressure and intrinsic and extrinsic factors affecting the efficiency of HPP are systematically and critically analyzed in this review to develop a clear understanding of these issues. Modeling applied to study the microbial inactivation kinetics by HPP is also discussed for the benefit of interested readers.

Ultrasonic and osmotic pretreatments followed by convective and vacuum drying of papaya slices.

BACKGROUND: Papaya fruit is highly nutritive, but very fragile, and thus has a limited shelf life. Drying is essential to preserve it for longer durations. In this work, osmotic dehydration (OD) with and without ultrasound (US) was applied to papaya slices as a pretreatment in conjugation with vacuum (VD) and convective air drying (AD). Drying was carried out in a novel dryer. Moisture content, drying time, water activity, total color change, total phenolic content, radical scavenging activity, texture, and Fourier-transform infrared (FTIR) spectrums were evaluated for fresh and dried papaya slices. RESULTS: It was observed that US-assisted osmotic dehydration (USOD) followed by VD had the lowest drying time with highest retention of phenols and antioxidants as compared to other drying techniques. Higher phenols and antioxidants in US-pretreated samples were attributed to the release of trapped intra-cellular polyphenols by cavitation. However, the color characteristics and texture of OD pretreatment followed by convective AD slices were found to be better. Color retention could be due to carotenoid preservation, which would be degraded in other treatments, whereas lower brittleness was associated with lower pectin. Infrared spectroscopy confirmed the retention of phytochemicals and antioxidants in dried papaya slices that were subjected to pretreatment. CONCLUSION: Pretreatment before drying enhances the end product quality of dried papaya slices. The results of this study highlight that USOD-VD is effective for nutrition preservation while OD-AD is suitable for preserving physical characteristics. © 2020 Society of Chemical Industry.

Low pressure superheated steam drying of onion slices: kinetics and quality comparison with vacuum and hot air drying in an advanced drying unit.

Pungency is important characteristics of onion and during processing it is generally reduces. Low pressure superheated steam drying (LPSSD) is gaining importance due to energy and product benefits. It results in better retentions of bioactive components. So, in current study onion slices were dried using low pressure superheated steam, and compared with vacuum and hot air drying at different temperature in NIFTEM advance drying unit. Among the selected models, Page's model gave a better prediction and satisfactorily described drying characteristics of onion slices. The Activation energy was found to be 41.87 kJ/mol in LPSSD. Quality of product, i.e. retention of color, rehydration ratio, thiosulphinate content, total phenol content and antioxidant activity, were better at 70 °C using LPSSD, at 60 °C using VD and HAD, as compared to other drying temperature in respective drying technologies used. Significant differences in quality of the dried product were also observed due to drying temperature in different drying techniques.

Effect of drying temperature and slice size on quality of dried okra (Abelmoschus esculentus (L.) Moench).

Okra (Abelmoschus esculentus (L) Moench) is an important vegetable crop of India. Dried okra pods have wide use in snacks and are in great demand for domestic as well as export market. Hence, effect of four slice sizes (1, 2, 3 and 4 cm) and four drying temperatures (50, 60, 70 and 80 °C) on quality of hot air dried okra were studied. Okra pods were dried in the form of slices cut across the length at different temperatures. Quality assessment of okra was done on the basis of protein, ascorbic acid and fibre content. Okra slice sizes and drying temperatures affected all the quality parameters significantly (p < 0.05). Maximum retention of protein, ascorbic acid and fibre content were found in 2 cm long slices dried at 60 °C temperature.

Effect of pretreatment and drying methods on quality of value-added dried aonla (Emblica officinalis Gaertn) shreds.

Value added dried Indian gooseberry (aonla) shreds were prepared using aonla fruits of cv. 'NA-7'. Two blanching methods (hot water and potassium metabisulphite (KMS) at 0.1%) and two drying methods (solar and hot air oven drying) were tried for the production of aonla shreds. Common salt, black salt and ginger juice were mixed for enhancing sensory quality of the product. The best product was obtained with KMS blanching and drying in solar dryer with added common salt at 3%. The most acceptable product had ascorbic acid content 298.3 mg/100 g, tannin 2.4%, acidity 2.6%, reducing sugar 3.0%, non-reducing sugar 21.0% and total sugar 24.0%. The recovery was 8.0-8.5%.

Heat and mass transfer in deep-frying of pumpkin, sweet potato and taro.

Heat and mass transfer parameters, effective thermal diffusivity, heat transfer coefficient, effective moisture diffusivity and moisture transfer coefficient-for pumpkin (Cucurbita pepo), sweet potato (Ipomoea batatas) and taro (Colocasia esculenta) under deep-frying conditions were determined by fitting experimental data on transient values of temperature and moisture content to the solution of the standard diffusion equation in cylindrical coordinates as modified by Dincer (Heat Mass Transfer 32:109-113, 1996). A case of Biot number in the range of 0< B i <100 was considered in this study. Remarkably good agreement was found between estimated and calculated values as the root mean square error between the measured and calculated temperature and moisture content values were only 5.0% and 1.3%, respectively. The model can be easily and effectively used to determine effective diffusion coefficients as well as transfer coefficients for heat and mass transfer. The oil uptake values for the above vegetables were lower than the values reported for other deep fried products.