Design and psychometric evaluation of organizational determinants of prenatal dental services questionnaire in Iran.

AIMS: The quality of prenatal dental services is essential for improving the oral health of both mothers and children. However, a lack of a reliable tool to assess the quality of prenatal oral care has hindered research in this area. To address this gap, the study aimed to validate the Organizational Determinants of Prenatal Dental Services Questionnaire (OD_PDS) in Iranian pregnant women. METHODS: Literature reviews, interviews, and a cross-sectional survey with 300 pregnant women were conducted. To evaluate the validity; face, content and construct validity were assessed. Cronbach's alpha coefficient and the Test-retest method were used for reliability assessment. RESULTS: The final version of the OD_PDS comprises 12 items, and four subscales, which are Costs (four items), Access to Equipment and services (three items), Review of the service delivery process (two items), and Professional Behavior (three items). Questions with a factor loading of less than 0.3 were excluded. The obtained fit indices were acceptable (X2/pdf = 3.383, RMSEA: 0.089, CFI = 0.869, and TLI = 0.820). The content reliability was demonstrated by Cronbach's α  = 0.702 and 0.713 and the ICC  =  0.724. CONCLUSION: The current study indicates that the OD_PDS is a valid and reliable tool for Prenatal Dental Services assessment in health centers.

Perceptions and determinants of oral health care among Iranian pregnant women: a qualitative study.

OBJECTIVES: This study aimed to gain a comprehensive understanding of the determinants that influence oral healthcare behaviours among Iranian pregnant women. STUDY DESIGN: Qualitative study. SETTING: Comprehensive health service centres. PARTICIPANTS: A sample consisting of all people involved in the process of oral care during pregnancy, 18 pregnant women, 7 midwives/healthcare workers, 3 supervisors of prenatal care services and 3 dentists) were purposefully sampled in terms of demographic characteristics. METHODS: The qualitative content analysis study conducted 31 semistructured individual interviews in 2022, utilising MAXQDA V.10. RESULTS: The participants identified 3 main categories and 11 subcategories: individual and physiological determinants (care needs, perceived importance, motivation, oral health literacy and inherent pregnancy limitations), organisational determinants (costs, access to equipment and services, review of service delivery process and professional behaviour) and social-cultural determinants (educational services and support from family and friends). CONCLUSIONS: The results can be used in interventions to improve oral healthcare for pregnant women. This study highlights the importance of addressing individual, organisational and social-cultural determinants to improve oral healthcare during pregnancy.

Does the application of whitening dentifrices during at-home bleaching affect the bond strength of resin composite to dentin?

AIM: This study aimed to evaluate the effect of using whitening dentifrices during at-home bleaching on the shear bond strength (SBS) of resin composite to dentin, and investigate whether the increased polymerization time would improve SBS. METHODS: Ninety-six bovine incisors were divided into 4 groups of 24, according to the whitening treatment applied as follows: group 1, at-home bleaching + brushing with a regular dentifrice; group 2, at-home bleaching + brushing with a whitening dentifrice containing ozone; group 3, at-home bleaching + brushing with a commercial whitening dentifrice; and group 4 (control), no whitening/brushing treatment. Each group was divided into two subgroups (n = 12) to assess the effect of curing time (20 versus 80 s) on SBS. A self-etch adhesive was bonded to dentin, and after 2-day water storage, SBS was determined. RESULTS: SBS was significantly affected by the whitening treatment (P = 0.03), but increasing the curing time had no significant effect on SBS (P = 0.137). Bond strength in group 1 was comparable to the control group (P > 0.05). The specimens in group 3 displayed significantly lower SBS than either group 4 or group 1 (P > 0.05). No significant difference was observed between the SBS of group 2 compared to any other group (P > 0.05). There was no significant association between the treatment group and failure type (P > 0.05). CONCLUSION: The bonding interface was not negatively influenced by the at-home bleaching procedure. However, using a commercial whitening dentifrice during at-home bleaching produced a significant detrimental effect on SBS. Extending the curing time would have no beneficial effect on adhesion to a whitened dental substrate.

Effect of Erbium:Yttrium-Aluminum-Garnet Laser Combined with Mineralizing Agents on Microhardness of Demineralized Dentin.

OBJECTIVE: The aim of this study was to assess the combined effect of erbium:yttrium-aluminum-garnet (Er:YAG) laser and mineralizing agents including casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and fluoride in improving the resistance of demineralized dentin at new demineralization process. MATERIALS AND METHODS: One hundred and twenty healthy dentin surfaces were prepared and demineralized using acidic solutions. Primary microhardness was measured (h1), and samples were randomly divided into six groups. Each group received a different protocol as follows: Group A (control group): no additional treatment, Group B: applying a fluoridated gel, Group C: applying a CPP-ACP-containing cream, Group D: irradiation of Er:YAG laser, Group E: irradiation of Er:YAG laser combined with the application of a fluoridated agent, and Group F: irradiation of Er:YAG laser combined with the application of CPP-ACP-containing cream. Microhardness values were measured afterward (h2). Then, all the groups were re-exposed to acidic solution, and microhardness was measured for the third time (h3). The microhardness data were analyzed using analysis of variance and Scheffe's post hoc test. RESULTS: Although application of mineralizing agents increased the microhardness of demineralized dentin in comparison with the control group, no significant difference was observed using two agents. Comparison of laser groups showed an increase in microhardness only after the irradiation of Er:YAG laser combined with the application of a fluoridated agent. Demineralizing process reduced the microhardness values in all the groups, but the application of a CPP-ACP agent caused the least reduction among the laser irradiated groups. Comparison of hardness changes at the beginning and end of the experiment did not show any significant differences between the groups. CONCLUSION: Comparison of treatment modalities used in this study exhibited that fluoride had the greatest impact on dentin resistance. Laser irradiation on demineralized dentin did not increase the hardness or resistance to acidic attacks.

Comparing the effect of a desensitizing material and a self-etch adhesive on dentin sensitivity after periodontal surgery: a randomized clinical trial.

OBJECTIVES: This double-blind randomized placebo-controlled clinical trial evaluated the ability of a desensitizing agent and a self-etch adhesive on cervical dentin sensitivity (CDS) after periodontal surgery. MATERIALS AND METHODS: Ninety hypersensitive teeth of 13 subjects were included in the study. After periodontal surgery, the teeth of each posterior sextant treated with one of the following materials: G1: Clearfil S3 Bond (Kuraray Dental), G2: Gluma Desensitizer (Heraeus Kulzer), and G3: placebo (water). The sensitivity was assessed using evaporative stimuli before treatment (baseline, T0), 1 day after treatment (T1), after 1 week (T2), and after 1 month (T3) according to visual analog scale (VAS). RESULTS: Following the treatment, all the 3 groups showed significant reduction of CDS in T1 compared to T0. Reduction of CDS between T1 and T2 was observed only in G1 but there was no significant difference between T2 and T3 in this group. Although we observed a significant difference in T3 compared to T1 and T2 in G2 and G3, comparison of treatment groups in each assessment time showed a significant difference only in T3. According to paired comparison, this was due to the difference between G2 and G3. CONCLUSIONS: Dentin sensitivity following periodontal surgery will decrease spontaneously over time, but treating the sensitive teeth with Gluma Desensitizer and Clearfil S3 Bond can have some benefits.

Evaluating the shear bond strength of enamel and dentin with or without etching: A comparative study between dimethacrylate-based and silorane-based adhesives.

BACKGROUND: Silorane-based composites and their specific self-etch adhesive were introduced to conquest the polymerization shrinkage of methacrylate-based composites. It has been shown that additional etching of enamel and dentin can improve the bond strength of self-etch methacrylate-based adhesives but this claim is not apparent about silorane-based adhesives. Our objective was to compare the shear bond strength (SBS) of enamel and dentin between silorane-based adhesive resin and a methacrylate-based resin with or without additional etching. MATERIAL AND METHODS: 40 sound human premolars were prepared and divided into two groups: 1- Filtek P60 composite and Clearfil SE Bond adhesive; 2- Filtek P90 composite and Silorane adhesive. Each group divided into two subgroups: with or without additional etching. For additional etching, 37% acid phosphoric was applied before bonding procedure. A cylinder of the composite was bonded to the surface. After 24 hours storage and 500 thermo cycling between 5-55°C, shear bond strength was assessed with the cross head speed of 0.5 mm/min. Then, bonded surfaces were observed under stereomicroscope to determine the failure mode. Data were analyzed with two-way ANOVA and Fischer exact test. RESULTS: Shear bond strength of Filtek P60 composite was significantly higher than Filtek P90 composite both in enamel and dentin surfaces (P<0.05). However, additional etching had no significant effect on shear bond strength in enamel or dentin for each of the composites (P>0.05). There was no interaction between composite type and additional etching (P>0.05). Failure pattern was mainly adhesive and no significant correlation was found between failure and composite type or additional etching (P>0.05). CONCLUSIONS: Shear bond strength of methacrylate-based composite was significantly higher than silorane-based composite both in enamel and dentin surfaces and additional etching had no significant effect on shear bond strength in enamel or dentin for each of the composites. The mode of failure had no meaningful relation to the type of composite and etching factor. KEY WORDS: Shear bond strength, adhesive, composite resin, silorane, methacrylate.