Alternative Method for Determination of Vibroacoustic Material Parameters for Building Applications.

The development of urbanization and the resulting expansion of residential and transport infrastructures pose new challenges related to ensuring comfort for city dwellers. The emission of transport vibrations and household noise reduces the quality of life in the city. To counteract this unfavorable phenomenon, vibration isolation is widely used to reduce the propagation of vibrations and noise. A proper selection of vibration isolation is necessary to ensure comfort. This selection can be made based on a deep understanding of the material parameters of the vibration isolation used. This mainly includes dynamic stiffness and damping. This article presents a comparison of the method for testing dynamic stiffness and damping using a single degree of freedom (SDOF) system and the method using image processing, which involves tracking the movement of a free-falling steel ball onto a sample of the tested material. Rubber granules, rubber granules with rubber fibers, and rebound polyurethanes were selected for testing. Strong correlations were found between the relative indentation and dynamic stiffness (at 10-60 MN/m3) and the relative rebound and damping (for 6-12%). Additionally, a very strong relationship was determined between the density and fraction of the critical damping factor/dynamic stiffness. The relative indentation and relative rebound measurement methods can be used as an alternative method to measure the dynamic stiffness and critical damping factor, respectively.

A Low-Stress Method for Determining Static and Dynamic Material Parameters for Vibration Isolation with the Use of VMQ Silicone.

Progressive urbanisation causes building users to be affected by increasing amounts of noise and vibrations that come from transportation and other building users. This article presents a test method that can be used to identify quantities of methyl vinyl silicone rubber (VMQ) necessary to carry out solid mechanics finite element method simulations such as Young's modulus, Poisson ratio, and damping parameters. These parameters are necessary to model the vibration isolation used for protection against noise and vibration. The article uses an original combination of dynamic response spectrum and image processing methods to determine these quantities. The tests were carried out using one machine for the range of normal compressive stresses of 64-255 kPa with cylindrical samples of various shape factors in the range of 1-0.25. The parameters for the simulation of solid mechanics in statics were obtained from image processing based on the deformation of the sample under load; for dynamic solid mechanics, the parameters were obtained from the response spectrum of the tested system. The article shows the possibility of determining the given quantities using the original method of the synthesis of dynamic response and FEM-supported image analysis, which states the article's novelty. Additionally, limitations and preferred ranges of sample deformation in terms of load stress and shape factor are presented.

Determination of Vibroacoustic Parameters of Polyurethane Mats for Residential Building Purposes.

This paper is aimed at investigating the use of polyurethane mats, usually used as ballast mats, for residential building purposes. Ballast mats have features that may improve the vibroacoustic comfort in residential rooms. Their strength is certainly an advantage, along with vibration and acoustic insulation. However, the problem that an engineer has to deal with, for example in modeling these types of mats, is a limited knowledge of the material's vibroacoustic parameters. Knowledge of these may be useful for residential buildings. This paper presents measurements of the vibroacoustic parameters of polyurethane mats, together with a suitable methodology and some results and analysis. The two main material parameters responsible for vibroacoustic protection were measured: the dynamic stiffness, which is related to the acoustic properties of the material, and the critical damping coefficient, which is obviously responsible for damping. The measurement methodology is clearly described. A total of five polyurethane materials with different densities were tested. It was possible to identify a relationship between the material density and the vibroacoustic parameters, which could offer an indication of which material to use, depending on the stimulus affecting a human in a given location.