Retention behavior of carbohydrates on metal loaded chelating stationary phase under conditions of hydrophilic interaction liquid chromatography.

The chromatographic retention of carbohydrates on chelating stationary phase loaded with different metal ions was studied under conditions of hydrophilic interaction chromatography (HILIC). The chelating stationary phases represented silica microparticles with immobilized 2-hydroxyethyliminodiacetic acid (HEIDA) groups in loose form and saturated with Ca2+, Pb2+, and La3+form. The role of loaded metal ion, the acetonitrile and methanol content in the mobile phase, buffer pH and column temperature on the retention of l-(+)-arabinose, d-(+)-maltose, l-(+)-rhamnose, d-(+)-lactose, d-(+)-xylose, glucose, fructose, sucrose, mannose, maltotriose and d-(+) raffinose was studied. The investigation was mainly focused on possible contribution of the complexation in the stationary phase on retention of carbohydrates as well as on effect of the presence metal ion in HEIDA-silica on resulting HILIC behavior of. It is shown that adsorbents with immobilized metal complexes have a good potential for the separation of organic ligands under HILIC mode.

Solid-phase analytical derivatization as a tool for the quantification of steroid hormones in human urine with HPLC-Q-ToF detection.

A possibility of application of solid-phase analytical derivatization (SPAD) for the quantification of seven steroid hormones (testosterone, dihydrotestosterone, cortisone, cortisol, progesterone, 11α-hydroxyprogesterone, and estrone) in human urine was evaluated. To prepare urine samples for instrumental analysis, SPAD with hydroxylamine was applied after enzymatic hydrolysis of the sample. To achieve high recovery values, extraction and derivatization conditions were optimized. Cartridges packed with end-capped octadecylsilyl silica sorbent provided optimum extraction of target analytes, while the reaction with hydroxylamine in the cartridge was found as a simple and efficient way for the chemical derivatization of steroids. The obtained derivatives were detected by using reversed-phase ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry. The proposed procedure was validated and applied to the analysis of real urine samples to prove the applicability of the proposed method for the routine analysis.

Solid-phase extraction of alkylphosphonic and O-alkyl alkylphosphonic acids followed by HPLC separation using porous graphitic carbon sorbent.

An HPLC separation of alkyl phosphonic acids on porous graphitic carbon adsorbent Hypercarb, based upon a step gradient of formic acid concentration in an aqueous mobile phase, was evaluated in this study. Analytes were detected by single quadrupole and triple quadrupole MS. Good separation was achieved for methyl phosphonic acid, ethylphosphonic acid, n-propylphosphonic acid, isopropylphosphonic acid, ethyl methylphosphonic acid, isopropyl methylphosphonic acid, isobutyl methylphosphonic acid, pinacolyl methylphosphonic acid. Solid-phase extraction of these analytes on Hypercarb was also proposed, desorption was carried out with aqueous ammonium formate and water-methanol mixtures. LODs were 0.1-0.2 ng mL-1 for these analytes without SPE; solid-phase extraction resulted in the decrease of LODs at least 100-fold. Accuracy was proven by analyses of spiked samples of river water and snow meltwater.

Chromatomembrane preconcentration of phenols using a new 3D printed microflow cell followed by reversed-phase HPLC determination.

Chromatomembrane process represents a universal approach to the separation of compounds in liquid-gas and liquid-liquid phases systems. However, the broad application of chromatomembrane separation methods in chemical analysis is restricted by the absence of serially produced chromatomembrane flow cells and the difficulties of their laboratory production. The present work addresses the preparation of chromatomembrane flow cell by using 3D printing. Fused deposition modeling and stereolithography were modes for the production of the flow cell using acrylonitrile-butadiene-styrene and polyacrylate-based Anycubic UV resins respectively. The separation and analytical performance of the 3D-printed flow cell were compared with a polyimide unit fabricated by a milling machine, the trial addressing the determination of phenol in the air. The method is based on chromatomembrane absorption of the analytes in 95 µL of the aqueous phase positioned in the cell. Reversed-phase HPLC with fluorimetric detection was applied for the determination of the absorbed analytes. The detection limit of phenols (phenol and m-cresol) in the air was 0.9 µg/m3 by absorption preconcentration time of 10 min. The volumetric flow rate of the analyzed air through the chromatomembrane cell using an electrodriven aspirator was 0.1 L/min.

Multi-lumen capillary based trypsin micro-reactor for the rapid digestion of proteins.

In this work we evaluated a novel microreactor prepared using a surface modified, high surface-to-volume ratio multi-lumen fused silica capillary (MLC). The MLC investigated contained 126 parallel channels, each of 4 µm internal diameter. The MLC, along with conventional fused silica capillaries of 25 µm and 50 µm internal diameter, were treated by (3-aminopropyl)triethoxysilane (APTES) and then modified with gold nanoparticles, of ∼20 nm in diameter, to ultimately provide immobilisation sites for the proteolytic enzyme, trypsin. The modified capillaries and MLCs were characterised and profiled using non-invasive scanning capacitively coupled contactless conductivity detection (sC4D). The sC4D profiles confirmed a significantly higher amount of enzyme was immobilised to the MLC when compared to the fused silica capillaries, attributable to the increased surface to volume ratio. The MLC was used for dynamic protein digestion, where peptide fragments were collected and subjected to off-line chromatographic evaluation. The digestion was achieved with the MLC reactor, using a residence time of just 1.26 min, following which the HPLC peak associated with the intact protein decreased by >70%. The MLC reactors behaved similarly to the classical in vitro or in-solution approach, but provided a reduction in digestion time, and fewer peaks associated with trypsin auto-digestion, which is common using in-solution digestion. The digestion of cytochrome C using both the MLC-IMER and the in-solution approach, resulted in a sequence coverage of ∼80%. The preparation of the MLC microreactor was reproducible with <2.5% RSD between reactors (n = 3) as determined by sC4D.

UiO-66@SiO2 core-shell microparticles as stationary phases for the separation of small organic molecules.

Composite particles containing the Zr-based metal-organic framework (MOF) UiO-66 were prepared using microwave-assisted solvothermal synthesis. Scanning electron microscopy, infrared spectroscopy, powder X-ray diffraction and nitrogen physisorption studies confirmed the deposition of 100-300 nm microporous particles with the UiO-66 topology on the surface of mesoporous 5 µm and non-porous 2.1 µm silica particles. The core-shell particles exhibited a unique flow-dependent separation selectivity (FDSS) effect which allows changes in both the retention and separation selectivity of small molecules by simple variation of the mobile phase flow rate under isocratic conditions. The impact of the loading of UiO-66 as well as the porosity of the underlying silica core (mesoporous and non-porous) on the FDSS effect was evaluated. The prepared adsorbents were also tested for the normal-phase (NP) and reversed-phase (RP) separation of xylene isomers, substituted benzenes and polyaromatic hydrocarbons (PAHs). Efficiencies of up to 32 400 plates per m (styrene, k 1.59) and 37 200 plates per m (anisole, k 2.90) were achieved under NP and RP modes, respectively. The results demonstrate the potential of novel MOF-based stationary phases for the separation of closely related compounds (e.g. positional isomers).

Anion exchangers with branched functional ion exchange layers of different hydrophilicity for ion chromatography.

Novel polystyrene-divinylbenzene (PS-DVB) based anion exchangers differing from each other in the structure of the branched functional ion exchange layer are prepared to investigate the role of linker and functional site on ion exchange selectivity. The proposed method of synthesis includes the obtaining of aminated PS-DVB particles by means of their acylation with following reductive amination with methylamine. Further modification of the obtained secondary aminogroups is provided by the alkylation with either 1,4-butanediol diglycidyl ether (1,4-BDDGE) or resorcinol diglycidyl ether (RDGE), which form the linkers of different hydrophobicity, and amination of terminal epoxide rings with trimethylamine (TMA), dimethylethanolamine (DMEA), methyldiethanolamine (MDEA) or triethanolamine (TEA). The variation of the structure and hydrophobicity of the linker and terminal quaternary ammonium sites in the functional layer allows the alteration of selectivity and separation efficiency of the obtained adsorbents. The ion exchange selectivity and separation efficiency of the anion exchangers are evaluated using the model mixtures of anions (F(-), HCOO(-), Cl(-), NO2(-), Br(-), NO3(-), HPO4(2-) and SO4(2-)) in potassium hydroxide eluents. The adsorbents show the decrease of selectivity with increasing the hydrophilicity of the terminal functional site. The anion exchangers having more flexible and hydrophilic 1,4-BDDGE linker provide smaller separation factors for most of the analytes as compared with RDGE-containing adsorbents with the same terminal ion exchange sites, but are characterized with higher column efficiencies and better peak symmetry for polarizable anions. In case of 1,4-BDDGE-modified anion exchangers of the particle size of 3.3µm functionalized with DMEA and MDEA the calculated values of column efficiencies for polarizable NO3(-) and Br(-) are up to 49,000 and 53,000N/m, respectively, which is almost twice higher than the values obtained for the RDGE-containing analogues.

Determination of trace labile copper in environmental waters by magnetic nanoparticle solid phase extraction and high-performance chelation ion chromatography.

Cobalt magnetic nanoparticles surface functionalised with iminodiacetic acid were evaluated as a nano-particulate solid phase extraction absorbent for copper ions (Cu(2+)) from environmental water samples. Using an external magnetic field, the collector nanoparticles could be separated from the aqueous phase, and adsorbed ions simply decomplexed using dilute HNO3. Effects of pH, buffer concentration, sample and sorbent volume, extraction equilibrium time, and interfering ion concentration on extraction efficiency were investigated. Optimal conditions were then applied to the extraction of Cu(2+) ions from natural water samples, prior to their quantitation using high-performance chelation ion chromatography. The limits of detection (LOD) of the combined extraction and chromatographic method were ~0.1 ng ml(-1), based upon a 100-fold preconcentration factor (chromatographic performance; LOD=9.2 ng ml(-1) Cu(2+)), analytical linear range from 20 to 5000 ng mL(-1), and relative standard deviations=4.9% (c=1000 ng ml(-1), n=7). Accuracy and precision of the combined approach was verified using a certified reference standard estuarine water sample (SLEW-2) and comparison of sample determinations with sector field inductively coupled plasma mass spectrometry. Recoveries from the addition of Cu(2+) to impacted estuarine and rain water samples were 103.5% and 108.5%, respectively. Coastal seawater samples, both with and without prior UV irradiation and dissolved organic matter removal were also investigated using the new methodology. The effect of DOM concentration on copper availability was demonstrated.

3D printed metal columns for capillary liquid chromatography.

Coiled planar capillary chromatography columns (0.9 mm I.D. × 60 cm L) were 3D printed in stainless steel (316L), and titanium (Ti-6Al-4V) alloys (external dimensions of ~5 × 30 × 58 mm), and either slurry packed with various sized reversed-phase octadecylsilica particles, or filled with an in situ prepared methacrylate based monolith. Coiled printed columns were coupled directly with 30 × 30 mm Peltier thermoelectric direct contact heater/cooler modules. Preliminary results show the potential of using such 3D printed columns in future portable chromatographic devices.

Preparation and characterisation of anion exchangers with dihydroxy-containing alkyl substitutes in the quaternary ammonium functional groups.

Novel poly(styrene-divinylbenzene) (PS-DVB) based anion exchangers having one and two (2,3-dihydroxypropyl) substitutes in the quaternary ammonium functional groups are prepared and characterised by ion chromatography (IC). The introduction of bulky and hydrophilic substitutes to the anion-exchange groups allows the elimination of non-ionic interactions between the polarisable anions and the aromatic rings from the matrix and the improvement of separation selectivity as compared with the traditional trimethylammonium (TMA) functionalised ion exchangers. The synthesis of the ion exchangers includes acylation of PS-DVB particles with acetic anhydride followed by reductive amination either with methylamine hydrochloride or dimethylamine and further alkylation with oxiranes under varied conditions. The ion exchange selectivity and separation efficiency of nine adsorbents having different structure of bonded groups, ion exchange capacity (9-98µequiv.g(-1)) or particle size is studied for model mixture of inorganic anions (F(-), Cl(-), NO2(-), Br(-), NO3(-), HPO4(2-) and SO4(2-)) using carbonate and hydroxide eluents. The adsorbents with more hydrophilic substitutes provided superior columns efficiencies and better peak symmetry as compared with analogues having hydrophobic functional groups. The calculated values of column efficiencies for polarisable NO3(-) and HPO4(2-) are 18,500 and 29,000N/m, respectively, for anion-exchanger, having N-methyl-N',N″-di-(2,3-dihydroxypropyl)ammonium groups which is significantly higher than 1800 and 12,000N/m obtained for these anions with anion exchanger bearing TMA functional groups.

[Sorbents with immobilized glycopeptide antibiotics for separating optical isomers by high-performance liquid chromatography].

Chiral sorbents for HPLC separation of optical isomers carrying glycopeptide antibiotics (eremomycin or its eremosaminyl aglycon, ristomycin, or vancomycin) fixed onto the surface of silica gel have been synthesized. The patterns of the retention and separation of profen isomers and their dependence on the nature of the chiral selector and the eluant composition have been studied. The sorbents were shown to be highly enantiospecific in separating the isomers of alpha-amino-, alpha-hydroxy-, and alpha-methylphenylcarboxylic acids (profens).

New chiral stationary phase with macrocyclic glycopeptide antibiotic eremomycin chemically bonded to silica.

A new chiral stationary phase (CSP) was prepared by attachment of macrocyclic glycopeptide antibiotic eremomycin to the epoxy-activated silica under mild conditions. In contrast to CSP with immobilized vancomycin, which is a close structural analogue of eremomycin, the prepared CSP reveals high enantioselectivity for separation of amino acids enantiomers. It was demonstrated by the example of ristocetin A CSP that method of the immobilization of macrocyclic glycopeptide antibiotics affects remarkably the resulting enantioselectivity.

Novel stationary phase with regulated anion-exchange capacity.

A novel stationary phase--phenylaminopropyl (PLA) bonded silica--is proposed for anion-exchange chromatography. Low basicity (pKA about 2.5) attached to silica phenylaminopropyl groups allows a variation of surface density of protonated sites in the pH range from 2 to 5. This enables us to use the same column for the separation of anions having different affinity to anion-exchangers. The effect of mobile phase pH on conditional capacity of PhA-silica was studied. The hypothesis on dependence of ion-exchange selectivity on the column capacity is discussed. Suitability of PhA-silica for ion-chromatographic separation of organic and inorganic anions at different pH values of eluent was demonstrated.

Ion-exchange properties of hypercrosslinked polystyrene impregnated with methyl orange.

A novel bipolar stationary phase (HCPS-MO) was prepared by impregnation of hypercrosslinked polystyrene (HCPS) with methyl orange (MO; 4-dimethylamino-4'-sulfoazobenzene) and its ion-exchange properties were studied. Simultaneous separation of cations and anions on HCPS-MO is possible, although it behaves preferentially as a cation-exchanger. Unusual selectivity of HCPS-MO for alkali and alkaline-earth metal cations: Na+ < Li+ approximately = K+ < Rb+ < NH4+ < Cs+ and Mg2+ < Sr2+ < Ca2+ < Ba2+ was observed. The effect of temperature on retention of alkali and alkaline-earth metal cations was studied. Separation of Na+, K+, Rb+, NH4+, Cs+, Mg2+ and Ca2+ on HCPS-MO with diluted cerium(III) nitrate solution as an eluent in single run is presented.

Simultaneous ion chromatographic separation of anions and cations on poly(aspartic acid) functionalized silica.

Poly(aspartic acid)-silica (PolyCAT A), originally designed for the cation-exchange chromatography of proteins, is proposed for the simultaneous ion chromatographic separation of inorganic anions and cations. This is possible owing to the zwitterion-exchange properties of this stationary phase, which are attributed to the presence of both protonated aminopropyl and dissociated carboxylic groups in poly(aspartic acid) attached to the silica. The retention of alkali metal (Li+, Na+, K+), alkaline earth metal (Mg2+, Ca2+), ammonium and inorganic anions (Cl-, H2PO4-, Br-, NO2-, I-, IO3-, NO3-, ClO4-, SCN-) was tested in aqueous solutions of sulfuric, perchloric, sulfosalicylic, citric, oxalic, maleic and aspartic acids with conductimetric detection. The effect of eluent pH, together with the concentration and characteristics of the eluting ions, were studied. Under optimum conditions (0.3 mmol dm(-3) H2SO4-0.2 mmol dm(-3) Li2SO4 eluent), the simultaneous separation of three anions (Cl-, H2PO4-, NO3-) and four cations (Na+, K+, Mg2+, Ca2+), on a PolyCAT A column (200 x 4.6 mm id, 5 microm film thickness) was achieved in 9 min.

Simultaneous determination of dihydroxybenzenes, aminophenols and phenylenediamines in hair dyes by high-performance liquid chromatography on hypercross-linked polystyrene.

The retention of polar organic molecules such as dihydroxybenzenes, aminophenols and phenylenediamines on a 250 x 4.6 mm id column packed with 5 microns hypercross-linked polystyrene Chromalite 5HGN (Purolite) was studied. The influence of separation parameters such as concentration of acetonitrile, buffer (citrate, phosphate) concentration, ionic strength and pH of the eluent on their retention was investigated. Under optimum conditions [acetonitrile-0.3 mol l-1 ammonium phosphate, pH 5.15 (30:70 v/v)], eight substances generally used as dye intermediates in hair colouring compositions could be separated within 20 min. An HPLC method with spectrophotometric detection is proposed for the simultaneous determination of pyrocatechol, resorcinol, hydroquinone, o-, m- and p-aminophenols and p-phenylenediamine in commercial haircolour products. The detection limits of these compounds are in the range 0.05-0.16 microgram ml-1. The suitability of the method is demonstrated by the analysis of three different permanent hair dyes.

Application of neutral hydrophobic hypercrosslinked polystyrene to the separation of inorganic anions by ion chromatography.

Neutral hydrophobic hypercrosslinked polystyrene was shown to exhibit anion-exchange properties in the pH range 2.6-4.3 that can be attributed to the presence of protonated carbonyls in the framework of the polymer. This resin does not contain any other heteroatoms, except oxygen, responsible for the occurrence of positive charge at the surface. The anion-exchange selectivity of MN-200 and monosized spherical hypercrosslinked polystyrene to inorganic anions with diluted perchloric, nitric and sulfuric acid solutions as eluent was studied and the selectivity was found to be different from that observed for the common anion-exchangers. The main features of hypercrosslinked polystyrene are weak retention of sulphate and comparatively strong retention of nitrite that can be useful in practical ion chromatography. The influence of column temperature on the retention was investigated. Calculated adsorption heats are in the range from -2 to 19 kJ/mol. The retention mechanism of inorganic anions on neutral hypercrosslinked polystyrene includes both ion-exchange and hydrophobic interactions.

Determination of beryllium in a stream sediment by high-performance chelation ion chromatography.

High-performance chelation ion chromatography (HPCIC), involving a chelating silica substrate bonded with aminomethylphosphonic acid, has been developed as a novel technique for the quantitative determination of beryllium in complex matrices. An isocratic separation method, using an eluent containing 1 M KNO3, 0.5 M HNO3 and 0.08 M ascorbic acid, allowed the Be2+ to elute away from the sample matrix peak in under 6 min in a sample containing in excess of 800 mg l(-1) matrix metals. A detection limit of 35 microg l(-1) Be(II) was found using a post-column reaction involving Chrome Azurol S (CAS), 1 M hexamine and 10 mM EDTA buffered at pH 6. The standard addition curve gave excellent linearity (R2>0.999). The procedure was applied to the determination of trace beryllium in a certified sediment sample. The results obtained compared well with the certified value for beryllium.

Phenylaminopropyl silica--a new specific stationary phase for high-performance liquid chromatography of phenols.

The chromatographic properties of a new stationary phase, phenylaminopropyl silica (PhA-silica), containing phenylaminopropyl residues covalently bonded to the silica surface were studied. The presence of secondary amino groups, phenyl rings and alkyl linkers in the attached molecule makes it especially suitable for the separation of phenols by mixed mode retention mechanism including a combination of hydrogen-bonding, hydrophobic, electrostatic and pi-pi interactions with the stationary phase. The effects of mobile phase pH, ionic strength, nature and concentration of organic modifier on the retention of phenols on PhA-silica were investigated under conditions of reversed-phase HPLC. To elucidate the role of the amino group in the attached molecule in retention of phenols the selectivity of PhA-silica was compared with that obtained for phenylpropyl silica in the framework of a linear solvation energy relationship (LSER) model. The isocratic separation of phenol, and its nine methyl-, chloro- and nitro-substituted derivatives was achieved on a 150x4.6 mm I.D. chromatographic column packed with 7 microm particles of PhA-silica.

The ion chromatographic separation of high valence metal cations using a neutral polystyrene resin dynamically modified with dipicolinic acid.

A neutral polystyrene resin column, dynamically loaded with dipicolinic acid at a concentration of 0.1 mM in 1 M potassium nitrate eluent, was investigated for the separation characteristics of a number of high valence metal cations over the pH range 0-3. The metal species studied were Th(IV), U(VI), Zr(IV), Hf(IV), Ti(IV), Sn(IV), V(IV) and V(V), Fe(III) and Bi(III), of which Ti(IV), Sn(IV), V(IV) and Fe(III) did not show any retention. For the remaining metal ions, significant retention was obtained with good peak shapes, except for Th(IV), which moved only slightly from the solvent front with some tailing. The retention order at pH 0.3 was Th(IV) < V(V) < Bi(III) < U(VI) < Hf(IV) < Zr(IV). A notable feature of this separation system was the high selectivity shown for uranium, zirconium and hafnium, the last two being nearly resolved in 15 min on the relatively short 10 cm column.