Conversion of foliar residues of Sansevieria trifasciata into adsorbents: dye adsorption in continuous and discontinuous systems.

The study analyzed the potential of leaf powder prepared from the residual leaves of the species Sansevieria trifasciata, as a potential adsorbent for methylene blue (MB) removal. The equilibrium was reached fast for almost all concentrations after 60 min, obtaining the maximum capacity of 139.98 mg g-1 for 200 mg L-1. The increase in temperature disfavored the dye adsorption, with the maximum adsorption capacity of 225.8 mg g-1, observed for 298 K. The thermodynamic parameters confirmed that the adsorption process is spontaneous and exothermic. A direct sloping curve was established for the fixed bed, with breakthrough time (tb), column stoichiometric capacities (qeq), and the mass transfer zone lengths (Zm) were 1430, 1130, and 525 min; 60.48, 187.01, and 322.65 mg g-1; and 8.81, 11.28, and 10.71 cm, for 100, 200, and 500 mg L-1, respectively. Furthermore, in a mixture of several dyes, the adsorbent obtained the removal of 51% of the color.

Transformation of Residual Açai Fruit (Euterpe oleracea) Seeds into Porous Adsorbent for Efficient Removal of 2,4-Dichlorophenoxyacetic Acid Herbicide from Waters.

Brazil's production and consumption of açai pulp (Euterpe oleracea) occur on a large scale. Most of the fruit is formed by the pit, which generates countless tons of residual biomass. A new purpose for this biomass, making its consumption highly sustainable, was presented in this study, where activated carbon (AC) was produced with zinc chloride for later use as an adsorbent. AC carbon formed by carbon and with a yield of 28 % was satisfactorily used as an adsorbent in removing the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Removal efficiency was due to the highly porous surface (Vp = 0.467 cm3 g-1; Dp = 1.126 nm) and good surface área (SBET = 920.56 m2 g-1). The equilibrium data fit the Sips heterogeneous and homogeneous surface model better. It was observed that the increase in temperature favored adsorption, reaching a maximum experimental capacity of 218 mg g-1 at 328 K. The thermodynamic behavior indicated a spontaneous, favorable, and endothermic behavior. The magnitude of the enthalpy of adsorption was in agreement with the physical adsorption. Regardless of the herbicide concentration, the adsorbent displayed fast kinetics, reaching equilibrium within 120 min. The linear driving force (LDF) model provided a strong statistical match to the kinetic curves. AC with zinc chloride (ZnCl2), created from leftover açai biomass, is a potential alternative as an adsorbent for treating effluents containing 2,4-D.

Adsorption kinetics and equilibrium of Ni2+, Cu2+, Co2+, and Ag+ on geopolymers derived from ashes: application to treat effluents from the E-Coat printing process.

Geopolymers were obtained from ashes through an alternative geopolymerization process and applied to remove Ni2+, Cu2+, Co2+, and Ag+ from synthetic aqueous media and real effluents. The study in synthetic solutions revealed that pseudo-second-order and general order models were the best to fit the kinetic curves. To represent the equilibrium curves, Langmuir and Freundlich were the most adequate. The geopolymer derived from bottom ash (GHA) was superior to adsorb Cu+2, Co+2, and Ag+1 than the geopolymer derived from fly ash (GFA). GHA reached adsorption capacities of 279.5, 288.2, and 462.8 mg g-1 for Co+2, Cu+2, and Ag+1, respectively. Otherwise, GFA was the best for Ni+2 removal, with an efficiency of 95% in low concentrations. In treating real effluents of the E-coat printing process, both GHA and GFA were efficient, with the removal of higher than 85% for all the metals. In brief, it can be stated that GFA and GHA prepared are promising materials to remove metals from aqueous media (synthetic and real), presenting fast adsorption kinetics, high adsorption capacity, and high metal removal percentage.

Effective removal of non-steroidal anti-inflammatory drug from wastewater by adsorption process using acid-treated Fagopyrum esculentum husk.

In this work, buckwheat husks (Fagopyrum esculentum) were modified by acid treatment and posteriorly employed to remove the ketoprofen in batch adsorption. The characterization results indicated that a more irregular surface with new empty spaces was generated after acid treatment. The adsorptive process was favored at acidic pH = 3. The dosage of 0.85 g L-1 was fixed for the kinetic and isothermal tests, obtaining good removal and capacity indications. The kinetic studies were better represented by pseudo-second-order, obtaining an experimental capacity of 74.3 mg g-1 for 200 mg L-1 of ketoprofen. An increase in temperature negatively affected the adsorption isotherm curves, resulting in a maximum capacity of 194.1 mg g-1. Thermodynamic results confirmed the exothermic nature of the process with physical forces acting. The adsorbent presented high efficiency in treating a synthetic effluent containing different drugs and salts, 71.2%. Therefore, adsorbent development from buckwheat husks treated with a strong acid is an excellent alternative, given the good removal results and the low cost for its preparation.

Synthesis of geopolymers from fly and bottom ashes of a thermoelectrical power plant for metallic ions adsorption.

A series of geopolymers were synthesized from fly and bottom ashes of a thermoelectrical power plant located in the Brazilian southern, aiming to add value for these wastes. The geopolymers were prepared in conventional and ultrasound-assisted ways and used to uptake Ag+, Co2+, Cu2+, and Ni2+ from aqueous solutions. All materials were characterized by infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and N2 adsorption isotherms (BET and BJH methods). The results revealed that the geopolymers obtained from the conventional method presented slightly higher values of surface area and total pore volume. However, in some cases, the adsorption potential was better for the ultrasound synthesized materials. The geopolymers prepared from both methods presented good adsorption performance concerning Ag+ and Cu2+, Co2+ and Ni2+. The removal percentages were higher than 90%. In addition, the adsorption capacities were within the literature range. These findings show that the ultrasound technique is not essential to improve the geopolymers production process compared to the conventional process, which generated material with better performance for heavy metals adsorption. Besides, it was possible to aggregate value for fly and bottom ashes, generating promising adsorbent materials.

Application of seed residues from Anadenanthera macrocarpa and Cedrela fissilis as alternative adsorbents for remarkable removal of methylene blue dye in aqueous solutions.

Two novel ecological and low-cost adsorbents were prepared from seed residues of the tree species Anadenanthera macrocarpa and Cedrela fissilis for the removal of methylene blue dye in water. The materials were comminuted and characterized by different techniques. The particles of samples have a rough surface with cavities. The optimum dosage and pH for both materials were 1 g L-1 and pH 8. The pseudo-second-order model was the most suitable for describing the adsorption kinetics for both systems. The Anadenanthera macrocarpa presented a maximum experimental capacity of 228 mg g-1, while the Cedrela fissilis, a similar capacity of 230 mg g-1 at 328 K. The Tóth model was proper for describing the equilibrium curves for both systems. The thermodynamic indicators show that the adsorption process is spontaneous and endothermic for both materials. The application of materials for the simulated effluent treatment showed 74 and 78% of color removal using Anadenanthera macrocarpa and Cedrela fissilis samples, respectively. Overall, seed residues of Anadenanthera macrocarpa and Cedrela fissilis could be potentially applied for adsorptive removal of colored contaminants in wastewater.

Utilization of Pacara Earpod tree (Enterolobium contortisilquum) and Ironwood (Caesalpinia leiostachya) seeds as low-cost biosorbents for removal of basic fuchsin.

Wastes from the Pacara Earpod tree (Enterolobium contortisilquum) and Ironwood (Caesalpinia leiostachya) seeds were studied as biosorbents for the removal of basic fuchsin from waters. Both biosorbents were prepared and characterized by different analytical methods. The characterization data showed that both materials were mainly composed of lignin, cellulose, and hemicellulose. Both biosorbents exhibited roughened surfaces and surface functional groups such as C-H, C=O, C=C, C-O, C-N, and OH bonds. Furthermore, the XRD pattern shows an amorphous phase with a wide peak from 10 to 30° due to the lignin. In terms of dosage and pH, the use of 1 g L-1 and 9.0, respectively, is recommended. The initial concentrations for the biosorption kinetics ranged from 50 to 500 mg L-1, where the Pacara ear and the Ironwood reached an adsorption capacity of 145.62 and 100.743 mg g-1 for the 500 mg L-1. The pseudo-second-order was found to be the proper model for describing biosorption of basic fuchsin onto Pacara Earpod tree and Ironwood, respectively. For the isotherm experiments, the maximum experimental biosorption capacity was found to be 166.858 and 110.317 mg g-1 for the Pacara Earpod and Ironwood for the initial concentration of 500 mg L-1 at 328 K. The Langmuir and the Tóth models were the best for representing the equilibrium curves for the basic fuchsin on the Pacara Earpod and the Ironwood, respectively. Maximum adsorption capacities of 177.084 mg g-1 and 136.526 mg g-1 were achieved for the Pacara Earpod tree and Ironwood, respectively. The biosorption process was spontaneous, endothermic, and favorable for both biosorbents. The biosorbents were also applied for coloration removal of simulated textile effluents, reaching 66% and 54% for the Pacara Earpod and Ironwood, respectively. For the final application, the materials were used in fixed-bed biosorption, with an initial concentration of 200 mg L-1, reaching breakthrough times of 710 and 415 min, leading to biosorption capacities of the column of 124.5 and 76.5 mg g-1, for the Pacara Earpod and Ironwood, respectively.

Evaluation of Ocotea puberula bark powder (OPBP) as an effective adsorbent to uptake crystal violet from colored effluents: alternative kinetic approaches.

The Ocotea puberula bark powder (OPBP) was evaluated as an effective adsorbent for the removal of crystal violet (CV) from colored effluents. OPBP was characterized and presented a surface with large cavities, organized as a honeycomb. The main functional groups of OPBP were O-H, N-H, C=O, and C-O-C. The adsorption of CV on OPBP was favorable at pH 9 with a dosage of 0.75 g L-1. The Avrami model was the most suitable to represent the adsorption kinetic profile, being the estimated equilibrium concentration value of 3.37 mg L-1 for an initial concentration of 50 mg L-1 (CV removal of 93.3%). The equilibrium was reached within 90 min. The data were better described by the Langmuir isotherm, reaching a maximum adsorption capacity of 444.34 mg g-1 at 328 K. The Gibbs free energy ranged from - 26.3554 to - 27.8055 kJ mol-1, and the enthalpy variation was - 11.1519 kJ mol-1. The external mass transfer was the rate-limiting step, with Biot numbers ranging from 0.0011 to 0.25. Lastly, OPBP application for the treatment of two different simulated effluents was effective, achieving a removal percentage of 90%.

Treatment of water containing methylene by biosorption using Brazilian berry seeds (Eugenia uniflora).

Brazilian berry seeds (Eugenia uniflora) were used as an eco-friendly and low-cost biosorbent for the treatment of textile effluents containing methylene blue. Characterization techniques indicated that Brazilian berry seeds are constituted of irregular particles, mainly composed of lignin and holocellulose groups, distributed in an amorphous structure. Methylene blue biosorption was favorable at pH of 8, using a biosorbent dosage of 0.8 g L-1. The equilibrium was reached in the first 20 min for lower M methylene blue concentrations and 120 min for higher methylene blue concentrations. Furthermore, the general and pseudo-second-order models were suitable for describing the kinetic data. Langmuir was the most adequate model for describing the isotherm curves, predicting a biosorption capacity of 189.6 mg g-1 at 328 K. Biosorption was spontaneous (- 9.54 ≤ ΔG0 ≤ -8.06 kJ mol-1) and endothermic, with standard enthalpy change of 6.11 kJ mol-1. Brazilian berry seeds were successfully used to remove the color of two different simulated textile effluents, achieving 92.2% and 73.5% of removal. Last, the fixed-bed experiment showed that a column packed with Brazilian berry seeds can operate during 840 min, attaining biosorption capacity of 88.7 mg g-1. The data here presented indicates that textile effluents containing methylene blue can be easily and successfully treated by an eco-friendly and low-cost biosorbent like Brazilian berry seeds.

Araticum (Annona crassiflora) seed powder (ASP) for the treatment of colored effluents by biosorption.

Dyes are widely used in many industrial sectors, many contain harmful substances to human health, and their release into the environment entails several environmental problems, generating a major worldwide concern as water resources are increasingly limited. The development of cheap and efficient biosorbents that remove these pollutants is of utmost importance. In this study, powdered seeds of the araticum fruit (Annona crassiflora) were used in the biosorption of crystal violet (CV) dye from aqueous solutions and simulated textile effluents. Through the characterization techniques, it can be observed that the material presented an amorphous structure, containing an irregular surface composed mainly by groups containing carbon, hydrogen, and oxygen. CV biosorption was favored at the natural pH of the solution (7.5) for a dosage of 0.7 g L-1 of araticum seed powder. The pseudo-second-order model was the most suitable to represent the biosorption kinetics in the removal of the CV. Biosorption capacity reached equilibrium in the first minutes at the lowest concentrations, and, at the highest, after 120 min. The equilibrium data were well represented by the Langmuir model, with a maximum biosorption capacity of 300.96 mg g-1 at 328 K. Biosorption had a spontaneous and endothermic nature. In the treatment of a simulated effluent, the biosorbent removed 87.8% of the color, proving to be efficient. Therefore, the araticum seeds powder (ASP) can be used as a low-cost material for the treatment of colored effluents containing the crystal violet (CV) dye.