The malunion of distal radius fracture: Corrective osteotomy through planning with prototyping in 3D printing.

INTRODUCTION: Distal radius fractures (DRF) are among the most frequent in the body. About one third of these fractures can result in malunion with restriction of movement and pain in the wrist, the treatment in these cases consists of corrective osteotomy of the deformity. Due to its three-dimensional (3D) complexity, careful preoperative planning is a fundamental step in correction. The prototyping from the 3D reconstruction of the computed tomography of the affected wrist, allows the real understanding of the deformity. METHODS: Patients with malunion of the distal radius with indication for surgical treatment, from December 2019, were included in the group of corrective osteotomies through planning with prototyping in 3D printing. The postoperative functional outcome was assessed by the Disabilities of the Arm, Shoulder and Hand Score (DASH) and visual analogue scale (VAS). Radiographic data including radial inclination, volar tilt and joint step were recorded from standard posteroanterior and lateral radiographic views. RESULTS: A total of 9 patients were included. The mean age was 47 years. The average postoperative DASH value of the patients was 24.9 and VAS was 3.6. Radiographically, the palmar tilt had an average improvement of 25.22°, and the radial inclination had an average improvement of 2°. CONCLUSION: Corrective osteotomy through planning with prototyping in 3D printing is an effective method of treating symptomatic distal radius malunions. The possibility of performing the osteotomy in a 3D model, simulating the surgery, making the procedure more predictable.

Glenoid failure after total shoulder arthroplasty with cemented all-polyethylene versus metal-backed implants: a systematic review protocol.

INTRODUCTION: Anatomical total shoulder arthroplasty (TSA) is an effective treatment adopted for patients with glenohumeral osteoarthritis (OA). The glenoid component failure is the main risk that occurs in this therapeutic choice; however, doubts remain regarding the selection of the best implant for avoiding complication. This systematic review aims to evaluate the glenoid component in TSA by comparing the complications of different types of implants. METHODS AND ANALYSIS: A systematic review of randomised clinical trials or quasi-randomised trials will be performed by applying the Preferred Reporting Items for Systematic Review and Meta-Analysis protocols and comparing polyethylene (keeled and pegged) versus metal-backed implants in adult patients with glenohumeral OA. Our search strategy will be performed using MEDLINE, PubMed, Cochrane Central Register of Controlled Trials, EMBASE and Web of Science. Data management and extraction will be performed using a data withdrawal form and by analysing study method characteristics, participant characteristics, intervention characteristics, results and methodological domains. The database search will be performed by February 2021. The Grading of Recommendations Assessment, Development and Evaluation will be used for assessing the quality of evidence of each study selected; however, some critical and important outcomes were determined such as the shoulder function through functional scores (Constant-Murley and American Shoulder and Elbow Surgeons), complications represented by pain (Visual Analogue Scale), surgical revision, radiograph radiolucency and loosening. The confidence in estimated effects for these outcomes will be applied as the overall confidence. The outcomes will be defined as early or late, according to the postoperative follow-up of less than or greater than 1 year, respectively, for complications and radiographs. For the shoulder function, follow-ups will be divided into 6, 12 and 24 months. Heterogeneity is expected in systematic reviews; therefore, the selection of outcomes, as well as the sample size, and specific statistical analysis can lead to meta-analysis; however, if it fails, narrative evidence synthesis will be conducted. Other analyses such as descriptive, subgroup and sensitivity analyses will be performed whenever possible. This systematic review will, therefore, provide evidence concerning the best clinical practice for avoiding complications. ETHICS AND DISSEMINATION: This study has been approved by the Institutional Review Board of Universidade Federal de São Paulo (protocols 0725/2017, 2.157.415 and 70473017.5.0000.5505), and the findings will be disseminated through peer-reviewed publication and conference presentations. PROSPERO REGISTRATION NUMBER: CRD42018079537.

Functional outcomes of traumatic and non-traumatic rotator cuff tears after arthroscopic repair.

AIM: To compare the functional outcomes of traumatic and non-traumatic rotator cuff tears after arthroscopic repair. METHODS: Eighty-seven patients with rotator cuff tears following arthroscopic treatment were divided into traumatic and non-traumatic tear groups. Postoperative muscle strength and outcomes using the modified University of California, Los Angeles score were evaluated. Sex, age, affected limb and dominant limb were correlated between groups. Muscle strength of the repaired and unaffected shoulders was compared. Rotator cuff injury size was measured. RESULTS: Of the 87 patients who underwent rotator cuff repairs, 35 had traumatic tears and 52 had non-traumatic tears. In patients with non-traumatic tears, the average age was 59 years, 74.5% were female, 96.1% were right-hand dominant and 92.3% had their dominant shoulder affected. Patients with traumatic tears were 59.5 years old on average, 51.4% were female, 91.4% were right-hand dominant and 88.5% had their dominant shoulder affected. No difference existed in the mean modified University of California, Los Angeles score between patients with traumatic tears (33.7) compared with those with non-traumatic tears (32.8). No strength differences were observed between groups: The strength difference between the non-affected and affected sides was 1.21 kg in the non-traumatic group and 1.39 kg in the traumatic group (P = 0.576), while the strength ratio between the non-affected/affected sides was 0.805 in the non-traumatic group and 0.729 in the traumatic group (P = 0.224). CONCLUSION: The functional results of traumatic rotator cuff repairs are similar to non-traumatic tears. Both outcomes are satisfactory.

Treatment of Displaced Midshaft Clavicle Fractures: Figure-of-Eight Harness Versus Anterior Plate Osteosynthesis: A Randomized Controlled Trial.

BACKGROUND: Most midshaft clavicle fractures affect the economically active population, which is negatively impacted by transient limb impairment during the treatment. There is still debate about the advantages and disadvantages of surgical treatment for these fractures. METHODS: In this prospective randomized controlled trial, 117 patients were allocated to 1 of 2 groups: nonsurgical treatment with a figure-of-eight harness or surgical treatment with anteroinferior plate osteosynthesis. The primary outcome was upper-limb limitation measured with the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire at 6 months. Other outcomes included pain, radiographic findings, satisfaction with the cosmetic result, complications, and time to return to previous work and activities. Participants were assessed at 6 weeks, 6 months, and 1 year after the intervention. RESULTS: No difference between the 2 groups was detected in the DASH score at any time point (p = 0.398, 0.403, and 0.877 at 6 weeks, 6 months, and 1 year, respectively), pain levels measured with a visual analogue scale (VAS), time to return to previous activities, or dissatisfaction with the cosmetic result. Seven patients (14.9%) developed nonunion after nonsurgical treatment, a nonunion rate that was significantly higher than that in the surgical group, in which all fractures had healed (p = 0.004). The patients in the nonsurgical group had radiographic evidence of greater clavicle shortening (p < 0.001) and more of the patients in that group answered "yes" when asked if their clavicle felt short (p < 0.001) and if they felt bone prominence (p < 0.001). More patients answered "yes" when asked if they felt paresthesia in the surgical group (7; 13.7%) than in the nonsurgical group (1; 2.1%) (p = 0.036). CONCLUSIONS: This study did not demonstrate a difference in limb function between patients who underwent surgical treatment and those nonsurgically treated for a dislocated midshaft clavicle fracture. Meanwhile, surgical treatment decreased the likelihood of nonunion. LEVEL OF EVIDENCE: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

Minimally Invasive Osteosynthesis with a Bridge Plate Versus a Functional Brace for Humeral Shaft Fractures: A Randomized Controlled Trial.

BACKGROUND: Nonoperative treatment has historically been considered the standard for fractures of the shaft of the humerus. Minimally invasive bridge-plate osteosynthesis for isolated humeral shaft fractures has been proven to be a safe technique, with good and reproducible results. This study was designed to compare clinical and radiographic outcomes between patients who had been treated with bridge plate osteosynthesis and those who had been managed nonoperatively with a functional brace. METHODS: A prospective randomized trial was designed and included 110 patients allocated to 1 of 2 groups: surgery with a bridge plate or nonoperative treatment with a functional brace. The primary outcome was the Disabilities of the Arm, Shoulder and Hand (DASH) score at 6 months. The score on the Short Form-36 (SF-36) life-quality questionnaire, complications of treatment, Constant-Murley score for the shoulder, pain level, and radiographic results were assessed as secondary outcomes. Participants were assessed at 2 weeks; 1, 2, and 6 months; and 1 year after the interventions. RESULTS: The mean DASH score of the bridge plate group was statistically superior to that of the functional brace group (mean scores, 10.9 and 16.9, respectively; p = 0.046) only at 6 months. The bridge plate group also had a significantly more favorable nonunion rate (0% versus 15%) and less mean residual angular displacement seen on the anteroposterior radiograph (2.0° versus 10.5°) (both p < 0.05). No difference between the groups was detected with regard to the SF-36 score, pain level, Constant-Murley score, or angular displacement seen on the lateral radiograph. CONCLUSIONS: This trial demonstrates that, compared with functional bracing, surgical treatment with a bridge plate has a statistically significant advantage, of uncertain clinical benefit, with respect to self-reported outcome (DASH score) at 6 months, nonunion rate, and residual deformity in the coronal plane as seen on radiographs. LEVEL OF EVIDENCE: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

Result from surgical treatment on the terrible triad of the elbow.

OBJECTIVE: To evaluate the results from surgical treatment of the terrible triad of the elbow, with a minimum of six months of follow-up, taking elbow function into consideration. METHODS: The analyzed aspects of 20 patients, who underwent surgical treatment of the terrible triad of the elbow, were given as follows: Dash score (Disabilities of the Arm, Shoulder and Hand), Meps (Mayo Elbow Performance Score), pain according to VAS (visual analog scale), ROM (range of motion), patient satisfaction, degree of energy of the trauma, complications and radiographs. RESULTS: The mean length of follow-up among the patients was 38 months. There were statistically significant relationships between the following set of parameters: trauma mechanism and patient satisfaction; radiological outcome of "heterotopic ossification" and satisfaction; functional flexion-extension ROM and satisfaction; and between type of radial head fracture and presence of a radiological outcome. CONCLUSION: The surgical treatment for the terrible triad of the elbow generally provided satisfactory results, when the functioning of this joint upon the return to activities was taken into consideration.

OBJETIVO: Avaliar os resultados do tratamento cirúrgico da tríade terrível do cotovelo, com no mínimo seis meses de seguimento, considerando a função do cotovelo. MÉTODOS: Foram analisados os seguintes aspectos de 20 pacientes submetidos a tratamento cirúrgico por tríade terrível do cotovelo: escores Dash (Disabilities of the Arm, Shoulder and Hand), Meps (Mayo Elbow Performance Score), dor pela EVA (Escala Visual Analógica), ADM (arco de movimento), satisfação do paciente, grau de energia do trauma, complicações e radiografias. RESULTADOS: O tempo médio de seguimento dos pacientes foi de 38 meses. Houve relação estatisticamente significativa entre: mecanismo de trauma e satisfação dos pacientes; desfecho radiológico "ossificação heterotópica" e satisfação; ADM funcional de flexo-extensão e satisfação e entre o tipo de fratura da cabeça do rádio e a presença de desfecho radiológico. CONCLUSÃO: O tratamento cirúrgico da tríade terrível do cotovelo proporcionou, de forma geral, resultados satisfatórios, quando se considera a função dessa articulação no retorno às atividades.

Correlation of the degree of clavicle shortening after non-surgical treatment of midshaft fractures with upper limb function.

BACKGROUND: Despite the use of non-surgical methods to treat for the majority of midshaft fractures of the clavicle, it is remains controversial whether shortening of this bone following non-surgical treatment of a middle third fracture affects upper limb function. METHODS: We conducted a cohort study by sequentially recruiting 59 patients with a fracture of the middle third of the clavicle. All patients were treated nonsurgically with a figure-of-eight bandage until clinical and radiological findings indicated healing of the fracture. Functional outcome was assessed using the Disability of Arm, Hand and Shoulder (DASH) score revalidated for the Portuguese language, other outcomes assessed included: pain measured by visual analogue scale (VAS); radiographies to measure the degree of shortening, fracture consolidation and fracture malunion. Information were also collected regarding the mechanism of injury, patient's daily activities level and epidemiological features of the patient cohort. The results of our findings are expressed as the comparison of the functional outcome with the degree of shortening. RESULTS: Patients were assessed six weeks and one year after injury. In the first evaluation, the mean DASH score was 28.84 and pain measured by VAS was 2.57. In the second evaluation (one year after injury) the mean DASH score was 8.18 and pain was 0.84. The mean clavicle shortening was 0.92 cm, ranging from 0 to 3 cm (SD = 0.64). There were no correlation between the degree of shortening and DASH score after six weeks and one year (p = 0.073 and 0.706, respectively). When only patients with of shortening greater than 2 cm were assessed for correlation, the result did not change. CONCLUSION: We conclude that clavicle shortening after nonsurgical treatment with a figure-of-eight bandage does not affect limb function, even when shortening exceeds 2 cm. TRIAL REGISTRATION: ISRCTN85206617 . Registered 12 May 2014.

Do computed tomography and its 3D reconstruction increase the reproducibility of classifications of fractures of the proximal extremity of the humerus? / A tomografia computadorizada e sua reconstrução 3D aumentam a reprodutibilidade das classificações das fraturas da extremidade proximal do úmero?

OBJECTIVE: to determine whether 3D reconstruction images from computed tomography (CT) increase the inter and intraobserver agreement of the Neer and Arbeitsgemeinschaft für Osteosynthesefragen (AO) classification systems. METHODS: radiographic images and tomographic images with 3D reconstruction were obtained in three shoulder positions and were analyzed on two occasions by four independent observers. RESULTS: the radiographic evaluation demonstrated that using CT improved the inter and intraobserver agreement of the Neer classification. This was not seen with the AO classification, in which CT was only shown to increase the interobserver agreement. CONCLUSION: use of 3D CT allows better evaluation of fractures with regard to their component parts and their displacements, but nevertheless the intraobserver agreement presented is less than ideal...

OBJETIVO: determinar se as imagens da reconstrução 3D da tomografia computadorizada (TC) aumentam a concordância inter e intraobservador dos sistemas de classificação de Neer e Arbeitsgemeinschaft für Osteosynthesefragen (AO). MÉTODOS: foram obtidas imagens radiográficas em três posições do ombro e imagens tomográficas com reconstrução 3D, que foram analisadas em dois tempos por quatro observadores independentes. RESULTADOS: a avaliação radiográfica demonstrou que o uso da TC melhora a concordância intra e interobservadores para a classificação de Neer. O mesmo não foi observado na classificação AO, na qual a TC demonstrou aumento somente da concordância interobservadores. CONCLUSÃO: o uso de TC 3D permite uma melhor avaliação da fratura quanto às partes que a compõem e aos seus desvios, mas mesmo assim apresenta uma concordância intraobservadores menor do que a ideal...

Reproducibility of three classifications of proximal humeral fractures.

OBJECTIVE: To propose a new system for classifying proximal humeral neck fractures, and to evaluate intra- and interobserver agreement using the Neer system that is the most commonly used in the area and the Arbeit Gemeinschaft für Osteosynthesefragen system created by an European group, and a new classification system proposed by the authors of this study. METHODS: A total of 56 patients with proximal humeral fractures were selected, and submitted to digitized simple radiography in antero-posterior shoulder and scapular profile. Radiographs were analyzed by three observers at time one, and then three and six weeks later. The kappa coefficient modified by Fleiss was used for the analysis. RESULTS: The mean intra-observer Kappa agreement index (k = 0.687) of the new classification, was higher than both the Neer classification (k = 0.362) and the Arbeit Gemeinschaft für Osteosynthesefragen (k = 0.46). The mean interobserver Kappa agreement index (0.446) of the new classification, also had better results than both the Neer classification (k = 0.063) and the Arbeit Gemeinschaft für Osteosynthesefragen (k = 0.028). CONCLUSION: the new classification considering bone compression had higher results for intra- and interobserver compared to the Neer system, and the Arbeit Gemeinschaft für Osteosynthesefragen system.

TREATMENT OF TRAUMATIC GLENOHUMERAL DISLOCATION: A CROSS-SECTIONAL STUDY.

OBJECTIVE: The aim of the present study was to investigate Brazilian orthopedists' opinions regarding the main aspects of the treatment of glenohumeral traumatic dislocation and compare these to literature's current concepts. METHODS: Two hundred questionnaires containing 13 items were randomly distributed to orthopedists who were attending a Brazilian orthopedics congress; 158 were filled, in correctly and were considered in this study. RESULTS: The preferred maneuver was traction-countertraction (60.8%). Among the respondents, 68.4% stated that glenohumeral dislocation reduction was achieved in the first attempt in 90% of the cases. The first attempt of reduction occurred mainly in the Emergency room (96.5%). Seventy-nine individuals (50%) reported that they do not use any analgesic prior to reduction. The majority of the participants immobilize their patients after the reduction (98.1%). 75.4% of them keep their patients immobilized from 2 to 3 weeks. CONCLUSION: Generally, Brazilian orthopaedists perform tractioncountertraction maneuvers, achieving reduction in the first attempt in more than 90% of the cases in the Emergency room. No previous analgesic agent is used prior to reduction. Immobilization of the patient is made with a Velpeau dressing or a sling for 2 to 3 weeks.

A mechanical comparison between conventional and modified angular plates for proximal humeral fractures.

The objective of this study is to present a modified angular blade plate for fixing 2-part and even 3-part fractures of the proximal humerus, as well as the results of the comparative mechanical test between the conventional angular blade plate and this new modified plate. The plates were tested in flexion and rotational trials in a wooden model that simulated a 2-part humeral fracture of the proximal extremity. The results (mean +/- SD) of bending strength and stiffness obtained after testing showed findings of 601 +/- 349 N and 0.5 +/- 0.2 N/mm, respectively, for the conventional plate and 4005 +/- 164 N and 3.9 +/- 0.7 N/mm, respectively, for the modified plate. The torsional stiffness test showed findings of 1.26 +/- 0.09 KN.mm degrees for the conventional plate and 1.74 +/- 0.21 KN.mm degrees for the modified plate. The test of torsional moment showed findings of 57.0 +/- 7.6 KN.mm for the conventional plate and 115.2 +/- 9.3 KN.mm for the modified plate. The test of angular displacement at the torsional moment showed findings of 50.8 degrees +/- 7.2 degrees for the conventional plate and 70.2 degrees +/- 2.6 degrees for the modified plate. The results of the mechanical trials of flexion and rotation were superior for the modified angular blade plate compared with the conventional angular blade plate.

Fixation of greater tuberosity fractures.

The authors describe arthroscopic reduction and percutaneous fixation of greater tuberosity fractures of the humerus with displacement of more than 0.5 cm. Arthroscopy for reduction and fixation of this fracture presents the same difficulties and advantages as arthroscopic repair of rotator cuff tears.