Open-source flow setup for rapid and efficient [18 F]fluoride drying for automation of PET tracer syntheses.

One of the key strategies for radiochemical research facilities is the automation of synthesis processes. Unnecessary manual operations increase the radiation exposure of personnel, while simultaneously threatening the reliability of syntheses. We have previously reported an affordable open-source system comprising 3D-printed continuous flow reactors, a custom syringe pump, and a pressure regulator that can be used to perform radiofluorinations. In this paper, we address additional essential processes that are needed for radiotracer development and synthesis, with the aim of making laboratory work safer and research more efficient. We have designed and evaluated a fully automated system for rapidly and effectively processing and drying aqueous [18 F]fluoride that can be directly connected to the cyclotron. This process relies on triflyl fluoride gas generation and allows nucleophilic [18 F]fluoride to be prepared safely in a hotcell within 10 min and an activity recovery of 91.7 ± 1.6% (n = 5). Owing to the need for convenient radiofluorinated prosthetic ligands, we have adapted our continuous flow system to produce [18 F]fluoroethyl tosylate (FEOTs) and [18 F]fluoroethyl triflate (FEOTf), prosthetic groups that are widely used for late-stage fluoroethylation of PET tracers. The processes as well as the radiolabeling of different groups are compared and comprehensively discussed. Having a method providing [18 F]fluoroethyl tosylate (FEOTs) as well as [18 F]fluoroethyl triflate (FEOTf) quickly and highly efficiently is beneficial for radiochemical research.

Low-budget 3D-printed equipment for continuous flow reactions.

This article describes the development and manufacturing of lab equipment, which is needed for the use in flow chemistry. We developed a rack of four syringe pumps controlled by one Arduino computer, which can be manufactured with a commonly available 3D printer and readily available parts. Also, we printed various flow reactor cells, which are fully customizable for each individual reaction. With this equipment we performed some multistep glycosylation reactions, where multiple 3D-printed flow reactors were used in series.