A facile strategy for tuning the density of surface-grafted biomolecules for melt extrusion-based additive manufacturing applications.

Melt extrusion-based additive manufacturing (ME-AM) is a promising technique to fabricate porous scaffolds for tissue engineering applications. However, most synthetic semicrystalline polymers do not possess the intrinsic biological activity required to control cell fate. Grafting of biomolecules on polymeric surfaces of AM scaffolds enhances the bioactivity of a construct; however, there are limited strategies available to control the surface density. Here, we report a strategy to tune the surface density of bioactive groups by blending a low molecular weight poly(ε-caprolactone)5k (PCL5k) containing orthogonally reactive azide groups with an unfunctionalized high molecular weight PCL75k at different ratios. Stable porous three-dimensional (3D) scaffolds were then fabricated using a high weight percentage (75 wt.%) of the low molecular weight PCL5k. As a proof-of-concept test, we prepared films of three different mass ratios of low and high molecular weight polymers with a thermopress and reacted with an alkynated fluorescent model compound on the surface, yielding a density of 201-561 pmol/cm2. Subsequently, a bone morphogenetic protein 2 (BMP-2)-derived peptide was grafted onto the films comprising different blend compositions, and the effect of peptide surface density on the osteogenic differentiation of human mesenchymal stromal cells (hMSCs) was assessed. After two weeks of culturing in a basic medium, cells expressed higher levels of BMP receptor II (BMPRII) on films with the conjugated peptide. In addition, we found that alkaline phosphatase activity was only significantly enhanced on films containing the highest peptide density (i.e., 561 pmol/cm2), indicating the importance of the surface density. Taken together, these results emphasize that the density of surface peptides on cell differentiation must be considered at the cell-material interface. Moreover, we have presented a viable strategy for ME-AM community that desires to tune the bulk and surface functionality via blending of (modified) polymers. Furthermore, the use of alkyne-azide "click" chemistry enables spatial control over bioconjugation of many tissue-specific moieties, making this approach a versatile strategy for tissue engineering applications. Supplementary Information: The online version contains supplementary material available at 10.1007/s42242-024-00286-2.

Microfluidic-derived docosahexaenoic acid liposomes for glioblastoma therapy.

Glioblastoma (GBM) is the most prevalent malignant primary brain tumor and currently lacks an effective treatment. In this study, we utilized a microfluidic system to synthesize docosahexaenoic acid (DHA) liposomes for GBM therapy. DHA is an omega-3 (ω3) polyunsaturated fatty acid commonly found in human dietary consumption that has demonstrated potential in mitigating cancer development. The microfluidic device employed allowed for precise fine-tuning of the physicochemical properties of liposomes by adjusting the flow rate ratios, flow rates, and lipid concentrations. Three distinct-sized liposomes, ranging from 80 nm and 130 nm, were successfully internalized by GBM cells, and demonstrated the ability to reduce the viability of these cells. Furthermore, DHA liposomes proved significantly more efficient in triggering apoptotic pathways, through caspase-3-dependent mechanisms, in comparison to free DHA. Thus, the nanomedicine platform established in this study presents new opportunities in the development of liposome formulations incorporating ω3 fatty acids for cancer therapy.

Replication of natural surface topographies to generate advanced cell culture substrates.

Surface topographies of cell culture substrates can be used to generate in vitro cell culture environments similar to the in vivo cell niches. In vivo, the physical properties of the extracellular matrix (ECM), such as its topography, provide physical cues that play an important role in modulating cell function. Mimicking these properties remains a challenge to provide in vitro realistic environments for cells. Artificially generated substrates' topographies were used extensively to explore this important surface cue. More recently, the replication of natural surface topographies has been enabling to exploration of characteristics such as hierarchy and size scales relevant for cells as advanced biomimetic substrates. These substrates offer more realistic and mimetic environments regarding the topographies found in vivo. This review will highlight the use of natural surface topographies as a template to generate substrates for in-vitro cell culture. This review starts with an analysis of the main cell functions that can be regulated by the substrate's surface topography through cell-substrate interactions. Then, we will discuss research works wherein substrates for cell biology decorated with natural surface topographies were used and investigated regarding their influence on cellular performance. At the end of this review, we will highlight the advantages and challenges of the use of natural surface topographies as a template for the generation of advanced substrates for cell culture.

The biomimetic surface topography ofRubus fruticosusleaves stimulate the induction of osteogenic differentiation of rBMSCs.

The interaction between cells and biomaterials is essential for the success of biomedical applications in which the implantation of biomaterials in the human body is necessary. It has been demonstrated that material's chemical, mechanical, and structural properties can influence cell behaviour. The surface topography of biomaterials is a physical property that can have a major role in mediating cell-material interactions. This interaction can lead to different cell responses regarding cell motility, proliferation, migration, and even differentiation. The combination of biomaterials with mesenchymal stem cells (MSCs) for bone regeneration is a promising strategy to avoid the need for autologous transplant of bone. Surface topography was also associated with the capacity to control MSCs differentiation. Most of the topographies studied so far involve machine-generated surface topographies. Herein, our strategy differentiates from the above mentioned since we selected natural surface topographies that can modulate cell functions for regenerative medicine strategies.Rubus fruticosusleaf was the selected topography to be replicated in polycaprolactone (PCL) membranes through polydimethylsiloxane moulding and using soft lithography. Afterwards, rat bone marrow stem cells (rBMSCs) were seeded at the surface of the imprinted PCL membranes to characterize the bioactive potential of our biomimetic surface topography to drive rBMSCs differentiation into the osteogenic lineage. The selected surface topography in combination with the osteogenic inductive medium reveals having a synergistic effect promoting osteogenic differentiation.

Macrophage cell membrane infused biomimetic liposomes for glioblastoma targeted therapy.

Glioblastoma (GBM) is a highly aggressive malignant brain tumor currently without an effective treatment. Inspired by the recent advances in cell membrane biomimetic nanocarriers and by the key role of macrophages in GBM pathology, we developed macrophage membrane liposomes (MML) for GBM targeting. For the first time, it was assessed the role of macrophage polarization states in the effectiveness of these drug delivery systems. Interestingly, we observed that MML derived from M2 macrophages (M2 MML) presents higher uptake and increased delivery of the anticarcinogenic drug doxorubicin compared to M1 macrophage-derived nanocarriers (M1 MML) and control liposomes (CL). Moreover, the lowest uptake by macrophages of MML reveals promising immune escaping properties. Notably, M2 macrophages unveiled a higher expression of integrin CD49d, a crucial protein involved in the bilateral communication of macrophages with tumor cells. Therefore, our findings suggest the potential of using M2 macrophage membranes to develop novel nanocarriers targeting GBM.

Biomimetic surface topography as a potential modulator of macrophages inflammatory response to biomaterials.

The implantation of biomaterial devices can negatively impact the local microenvironment through several processes including the injury incurred during the implantation process and the associated host inflammatory response. Immune cell responses to implantable biomaterial devices mediate host-material interactions. Indeed, the immune system plays a central role in several biological processes required for the integration of biomaterials such as wound healing, tissue integration, inflammation, and foreign body reactions. The implant physicochemical properties such as size, shape, surface area, topography, and chemistry have been shown to provide cues to the immune system. Its induced immune-modulatory responses towards inflammatory or wound healing phenotypes can determine the success of the implant. In this work, we aim to evaluate the impact of some biomimetic surface topographies on macrophages' acute inflammatory response. For that, we selected 4 different biological surfaces to replicate through soft lithography on spin casting PCL membranes. Those topographies were: the surface of E. coli, S.eppidermidis and L929 cells cultured in polystyrene tissue culture disks, and an Eggshell membrane. We selected a model based on THP-1-derived macrophages to study the analysis of the expression of both pro-inflammatory and anti-inflammatory markers. Our results revealed that depending on the surface where these cells are seeded, they present different phenotypes. Macrophages present a M1-like phenotype when they are cultured on top of PCL membranes with the surface topography of E. coli and S. epidermidis. When cultured on membranes with L929 monolayers or Eggshell membrane surface topography, the macrophages present a M2-like phenotype. These results can be a significant advance in the development of new implantable biomaterial devices since they can help to modulate the inflammatory responses to implanted biomaterials by controlling their surface topography.

Erythrocyte-derived liposomes for the treatment of inflammatory diseases.

Effective and safe therapies to counteract persistent inflammation are necessary. We developed erythrocyte-derived liposomes (EDLs) with intrinsic anti-inflammatory activity. The EDLs were prepared using lipids extracted from erythrocyte membranes, which are rich in omega-3 fatty acids with several health benefits. Diclofenac, a widely used anti-inflammatory drug, was incorporated into EDLs in relevant therapeutic concentrations. The EDLs were also functionalised with folic acid to allow their active targeting of M1 macrophages, which are key players in inflammatory processes. In the presence of lipopolysaccharide (LPS)-stimulated macrophages, empty EDLs and EDLs incorporating diclofenac were able to reduce the levels of important pro-inflammatory cytokines, namely interleukin-6 (IL-6; ≈85% and 77%, respectively) and tumour necrosis factor-alpha (TNF-α; ≈64% and 72%, respectively). Strikingly, cytocompatible concentrations of EDLs presented similar effects to dexamethasone, a potent anti-inflammatory drug, in reducing IL-6 and TNF-α concentrations, demonstrating the EDLs potential to be used as bioactive carriers in the treatment of inflammatory diseases.

Study of the immunologic response of marine-derived collagen and gelatin extracts for tissue engineering applications.

The host immunologic response to a specific material is a critical aspect when considering it for clinical implementation. Collagen and gelatin extracted from marine sources have been proposed as biomaterials for tissue engineering applications, but there is a lack of information in the literature about their immunogenicity. In this work, we evaluated the immune response to collagen and/or gelatin from blue shark and codfish, previously extracted and characterized. After endotoxin evaluation, bone marrow-derived macrophages were exposed to the materials and a panel of pro- and anti-inflammatory cytokines were evaluated both for protein quantification and gene expression. Then, the impact of those materials in the host was evaluated through peritoneal injection in C57BL/6 mice. The results suggested shark collagen as the less immunogenic material, inducing low expression of pro-inflammatory cytokines as well as inducible nitric oxide synthase (encoded by Nos2) and high expression of Arginase 1 (encoded by Arg1). Although shark gelatin appeared to be the material with higher pro-inflammatory expression, it also presents a high expression of IL-10 (anti-inflammatory cytokine) and Arginase (both markers for M2-like macrophages). When injected in the peritoneal cavity of mice, our materials demonstrated a transient recruitment of neutrophil, being almost non-existent after 24 hours of injection. Based on these findings, the studied collagenous materials can be considered interesting biomaterial candidates for regenerative medicine as they may induce an activation of the M2-like macrophage population, which is involved in suppressing the inflammatory processes promoting tissue remodeling. STATEMENT OF SIGNIFICANCE: Marine-origin biomaterials are emerging in the biomedical arena, namely the ones based in marine-derived collagen/gelatin proposed as cell templates for tissue regeneration. Nevertheless, although the major cause of implant rejection in clinical practice is the host's negative immune response, there is a lack of information in the literature about the immunological impact of these marine collagenous materials. This work aims to contribute with knowledge about the immunologic response to collagen/gelatin extracted from blue shark and codfish skins. The results demonstrated that despite some differences observed, all the materials can induce a macrophage phenotype related with anti-inflammation resolution and then act as immuno-modulators and anti-inflammatory inducible materials.

Biomimetic and cell-based nanocarriers - New strategies for brain tumor targeting.

In the last two decades no significant advances were achieved in the treatment of the most frequent and malignant types of brain tumors. The main difficulties in achieving progress are related to the incapacity to deliver drugs in therapeutic amounts into the central nervous system and the associated severe side effects. Indeed, to obtain effective treatments, the drugs should be able to cross the intended biological barriers and not being inactivated before reaching the specific therapeutic target. To overcome these challenges the development of synthetic nanocarriers has been widely explored for brain tumor treatment but unfortunately with no clinical translation until date. The use of cell-derived nanocarriers or biomimetic nanocarriers has been studied in the last few years, considering their innate bio-interfacing properties. The ability to carry therapeutic agents and a higher selectivity towards brain tumors would bring new hope for the development of safe and effective treatments. In this review, we explore the biological barriers that need to be crossed for effective delivery in brain tumors, and the types and properties of cell-based nanocarriers (extracellular vesicles and cell-membrane coated nanocarriers) currently under investigation.

Fabrication of biomimetic patterned PCL membranes mimicking the complexity of Rubus fruticosus leaves surface.

The development of bioresponsive interfaces that can induce a beneficial impact on cell mechanisms, such as adhesion, proliferation, migration and differentiation are of utmost relevance in Tissue engineering (TE) approaches. The surface topography is a captivating property that contribute to interesting cell responses, being inspired by several cues found in nature. Therefore, the study herein presented reports the fabrication of a surface topography using the Rubus fruticosus leaf on spin casting polycaprolactone (PCL) membranes. The topography was replicated by replica molding rapid fabrication technique and nanoimprint lithography (NIL). The biomimetic patterned PCL membranes (bpM) were successfully produced revealing high detail due to the complexity of the leaf's surface ranging from the stroma structures to nerves structures. The thermal evaluation revealed a slight increase of crystallinity of the bpM compared with the other tested conditions. However, did not induce significant effects on the melting and recrystallization temperatures. The mechanical properties revealed that the young modulus increase from 3.2 MPa to 4.4 MPa during the imprinting process. However, bpM presents a lowest elongation capacity than bare membrane (bM) (1076 to 444 %, respectively) due to the heterogeneous thickness induced by the topography. The selected topography revealed to promote a positive bioresponse, depicted by the improvement of the cellular behaviour and different organization. This promising strategy revealed that circumventing the traditional topographies by nature mimetic topographies is fundamental for the development of innovative bioresponsive substrates that can tune cellular behaviour in TE strategies.

Caloric restriction-induced weight loss with a high-fat diet does not fully recover visceral adipose tissue inflammation in previously obese C57BL/6 mice.

Caloric restriction (CR) reduces body weight and systemic inflammation, but the effects on adipose tissue under dietary lipid overload are controversial. We evaluated the effects of CR-induced weight loss with a high-fat diet on adipose tissue inflammation of obese mice. Male mice were assigned into low-fat diet (LF) and high-fat diet (HF) groups. After 8 weeks, the mice in the HF group were reassigned for another 7 weeks into the following 3 conditions: (i) kept in the HF condition; (ii) changed to low-fat diet ad libitum (LFAL); and (iii) changed to high-fat calorie-restricted (RHF) diet to reach LFAL body weight. Serum markers, adipocytokines, morphology, and inflammatory infiltrates in retroperitoneal adipose tissue (RAT) were accessed. The body weights of the LFAL and RHF groups were reduced, equaling the body weights of the LF group. The LFAL mice had restored almost all inflammatory markers as the LF mice, except tumor necrosis factor-alpha (TNF-α), monocyte chemoattractant protein-1 (MCP-1), and adiponectin. Compared with the HF group, the RHF group had lowered visceral adiposity, retroperitoneal adipocyte sizes, and RAT inflammatory cell infiltration, as well as TNF-α, interleukin-6, and hepatic and serum C-reactive protein, which were higher than that of the LFAL group; adiponectin and MCP-1 did not change. CR with high-fat diet reduced body weight and attenuated visceral adiposity but did not fully recover visceral tissue inflammation. Novelty Caloric restriction in a high-fat diet ameliorated visceral adiposity. Caloric restriction in a high-fat diet did not recover visceral adipose tissue inflammation.

Interplay between sympathetic nervous system and inflammation in aseptic loosening of hip joint replacement.

Inflammation is a common symptom in joint disorders such as rheumatoid arthritis, osteoarthritis (OA) and implant aseptic loosening (AL). The sympathetic nervous system is well known to play a critical role in regulating inflammatory conditions, and imbalanced sympathetic activity has been observed in rheumatoid arthritis. In AL it is not clear whether the sympathetic nervous system is altered. In this study we evaluated the systemic and local profile of neuroimmune molecules involved in the interplay between the sympathetic nervous system and the periprosthetic inflammation in hip AL. Our results showed that periprosthetic inflammation does not trigger a systemic response of the sympathetic nervous system, but is mirrored rather by the impairment of the sympathetic activity locally in the hip joint. Moreover, macrophages were identified as key players in the local regulation of inflammation by the sympathetic nervous system in a process that is implant debris-dependent and entails the reduction of both adrenergic and Neuropetide Y (NPY)-ergic activity. Additionally, our results showed a downregulation of semaphorin 3A (SEMA3A) that may be part of the mechanism sustaining the periprosthetic inflammation. Overall, the local sympathetic nervous system emerges as a putative target to mitigate the inflammatory response to debris release and extending the lifespan of orthopedic implants.

In vivo and clinical application of strontium-enriched biomaterials for bone regeneration: A systematic review.

OBJECTIVES: This systematic review aimed to assess the in vivo and clinical effect of strontium (Sr)-enriched biomaterials in bone formation and/or remodelling. METHODS: A systematic search was performed in Pubmed, followed by a two-step selection process. We included in vivo original studies on Sr-containing biomaterials used for bone support or regeneration, comparing at least two groups that only differ in Sr addition in the experimental group. RESULTS: A total of 572 references were retrieved and 27 were included. Animal models were used in 26 articles, and one article described a human study. Osteoporotic models were included in 11 papers. All articles showed similar or increased effect of Sr in bone formation and/or regeneration, in both healthy and osteoporotic models. No study found a decreased effect. Adverse effects were assessed in 17 articles, 13 on local and four on systemic adverse effects. From these, only one reported a systemic impact from Sr addition. Data on gene and/or protein expression were available from seven studies. CONCLUSIONS: This review showed the safety and effectiveness of Sr-enriched biomaterials for stimulating bone formation and remodelling in animal models. The effect seems to increase over time and is impacted by the concentration used. However, included studies present a wide range of study methods. Future work should focus on consistent models and guidelines when developing a future clinical application of this element.Cite this article: N. Neves, D. Linhares, G. Costa, C. C. Ribeiro, M. A. Barbosa. In vivo and clinical application of strontium-enriched biomaterials for bone regeneration: A systematic review. Bone Joint Res 2017;6:366-375. DOI: 10.1302/2046-3758.66.BJR-2016-0311.R1.

IL33 and IL1RL1 variants are associated with asthma and atopy in a Brazilian population.

Atopic asthma is a chronic inflammatory disease in airways resulting from genetic and environmental factors, characterized by production of the Th2 cytokines interleukin-4 (IL-4), interleukin-5 (IL-5) and interleukin-13 (IL-13). Interleukin-33 (IL-33) appears to be a potent inducer of Th2 immune response. This occurs when IL-33 binds and activates its receptor, the membrane ST2 (ST2L) in mast cells, dendritic cells, basophils, eosinophils, innate lymphoids and Th2 cells, leading to the release of these cytokines and intensifying allergic inflammation. Polymorphisms in the IL33 and IL1RL1 can act as protective or risk factors for asthma and/or allergy in humans. No study was conducted to replicate such findings in a European and African descendent mixed population. DNA was extracted from peripheral blood from 1223 subjects, and the samples were genotyped using Illumina 2.5 Human Omni Beadchip. We tested for possible associations between SNPs in the IL33 and ST2 with asthma and allergy markers such as specific IgE (sIgE), IL-5 and IL-13 production and skin prick test (SPT). Logistics regressions were performed using PLINK software 1.07. The analyses were adjusted for sex, age, helminth infection and ancestry markers. The G allele of IL33 SNP rs12551256 was negatively associated with asthma (OR 0.71, 95% CI: 0.53-0.94, P = 0.017). In contrast, the A allele of IL1RL1 rs1041973 was positively associated with IL-5 production (OR 1.36, 95% CI: 1.09-1.84, P = 0.044), sIgE levels (OR 1.40, 95% CI: 1.07-1.84, P = 0.013) and positive SPT (OR 1.48, 95% CI: 1.08-2.03, P = 0.014), for Blomia tropicalis mite. The same allele, in atopic subjects, was associated with decreased production of soluble ST2 (sST2) (P < 0.05). Moreover, expression quantitative trait loci (eQTL) analysis suggests that rs1041973 and rs873022 regulate the expression of IL1RL1 gene. This latest SNP, rs873022, the T allele, was also associated with a lower production of sST2 in plasma of Brazilians. The genetic risk score for rs1041973 and rs16924161 demonstrated a higher risk for SPT positivity against B. tropicalis, the greater the number of risk alleles for both SNPs. Our findings demonstrate a robust association of genetic variants in IL1RL1 and IL33 SNPs with allergy markers and asthma.

In vitro chondrogenic commitment of human Wharton's jelly stem cells by co-culture with human articular chondrocytes.

Wharton's jelly stem cells (WJSCs) are a potential source of transplantable stem cells in cartilage-regenerative strategies, due to their highly proliferative and multilineage differentiation capacity. We hypothesized that a non-direct co-culture system with human articular chondrocytes (hACs) could enhance the potential chondrogenic phenotype of hWJSCs during the expansion phase compared to those expanded in monoculture conditions. Primary hWJSCs were cultured in the bottom of a multiwell plate separated by a porous transwell membrane insert seeded with hACs. No statistically significant differences in hWJSCs duplication number were observed under either of the culture conditions during the expansion phase. hWJSCs under co-culture conditions show upregulations of collagen type I and II, COMP, TGFß1 and aggrecan, as well as of the main cartilage transcription factor, SOX9, when compared to those cultured in the absence of chondrocytes. Chondrogenic differentiation of hWJSCs, previously expanded in co-culture and monoculture conditions, was evaluated for each cellular passage using the micromass culture model. Cells expanded in co-culture showed higher accumulation of glycosaminoglycans (GAGs) compared to cells in monoculture, and immunohistochemistry for localization of collagen type I revealed a strong detection signal when hWJSCs were expanded under monoculture conditions. In contrast, type II collagen was detected when cells were expanded under co-culture conditions, where numerous round-shaped cell clusters were observed. Using a micromass differentiation model, hWJSCs, previously exposed to soluble factors secreted by hACs, were able to express higher levels of chondrogenic genes with deposition of cartilage extracellular matrix components, suggesting their use as an alternative cell source for treating degenerated cartilage. Copyright © 2015 John Wiley & Sons, Ltd.

Wildfire patterns and landscape changes in Mediterranean oak woodlands.

Fire is infrequent in the oak woodlands of southern Portugal (montado) but large and severe fires affected these agro-forestry systems in 2003-2005. We hypothesised transition from forest to shrubland as a fire-driven process and investigated the links between fire incidence and montado change to other land cover types, particularly those related with the presence of pioneer communities (generically designed in this context as "transitions to early-successional communities"). We present a landscape-scale framework for assessing the probability of transition from montado to pioneer communities, considering three sets of explanatory variables: montado patterns in 1990 and prior changes from montado to early-successional communities (occurred between 1960 and 1990), fire patterns, and spatial factors. These three sets of factors captured 78.2% of the observed variability in the transitions from montado to pioneer vegetation. The contributions of fire patterns and spatial factors were high, respectively 60.6% and 43.4%, the influence of montado patterns and former changes in montado being lower (34.4%). The highest amount of explained variation in the occurrence of transitions from montado to early-successional communities was related to the pure effect of fire patterns (19.9%). Low spatial connectedness in montado landscape can increase vulnerability to changes, namely to pioneer vegetation, but the observed changes were mostly explained by fire characteristics and spatial factors. Among all metrics used to characterize fire patterns and extent, effective mesh size provided the best modelling results. Transitions from montado to pioneer communities are more likely in the presence of high values of the effective mesh size of total burned area. This cross-boundary metric is an indicator of the influence of large fires in the distribution of the identified transitions and, therefore, we conclude that the occurrence of large fires in montado increases its probability of transition to shrubland.

Surgical management of cervical spine instability in rheumatoid arthritis patients.

AIM: Cross-sectional study that aims to evaluate the results of cervical spine surgeries due to rheumatoid arthritis (RA) instability, between January of 2000 and of 2012 in a main Portuguese centre. METHODS: Patients followed on Rheumatology submitted to cervical spine fusion due to atlantoaxial (AAI), sub-axial (SAI) or cranio-cervical (CCI) instabilities between 2000-2012 were included. Information about the surgical procedure and associated complications was gathered and imagiologic and clinical indexes before and after surgery (as anterior and posterior atlanto-axial interval and Ranawat index) were evaluated and compared using adequate statistics. RESULTS: Forty-five patients with RA were included: 25 with AAI, 13 with CCI and 7 with SAI. Ten AAI and 4 CCI patients were submitted to wiring stabilization techniques; 15 AAI and 9 CCI patients to rigid ones; and in all patients with SAI an anterior cervical arthrodesis was chosen. There is a significant increase in PADI and a decrease in AADI in the postoperative evaluation (p<0,05) that only remains significant when rigid systems were used. After surgery the Ranawat index decreased (p<0,05) and no patient showed a deterioration of neurological condition. The complication rate was of 23,1%, with 5 mal-unions. CONCLUSION: Surgical management of cervical column instabilities in patients with rheumatoid arthritis seems to be a safe procedure, with a high rate of neurologic improvement. Rigid techniques seem to lead to a better imagiological improvement when compared to wiring ones.

Bottom-up approach to construct microfabricated multi-layer scaffolds for bone tissue engineering.

The use of bottom-up approaches in tissue engineering applications is advantageous since they enable the combination of various layers that could be made from different materials and/or incorporate different biochemical cues. Regarding the complex structure and the vascular system of the bone tissue, the aim of this study was to develop an innovative bottom-up approach that allows the construction of 3D biodegradable scaffolds from 2D microfabricated membranes with precise shape, pore size and porosity. For that purpose, poly (caprolactone) (PCL) and starch ­ poly (caprolactone) (SPCL (30 % starch)) blended sheets were used as substrates to produce the microfabricated membranes using micro hotembossing. The use of this micro fabrication process allowed accurately imprinting micropillars and microholes in reproducible way. The assembling of the microfabricated membranes was performed using an easy, highly reproducible and inexpensive approach based on its successive stacking. Additionaly, the suitability of the microfabricated membranes to support the attachment and the cytoskeletal organization of human bone marrow stem cells (hBMSCs), macrovascular endothelial cells and osteoblasts derived from hBMSCs was demonstrated. Furthermore, hBMSCs proliferated and maintained the expression of the stromal progenitor marker STRO-1 when cultured on both PCL and SPCL microfabricated membranes. The proposed methodology constitutes a promising alternative to the traditional processing methods used to prepare tissue engineering scaffolds.

Detection of parasite antigens in Leishmania infantum-infected spleen tissue by monoclonal antibody-, piezoelectric-based immunosensors.

Diseases such as leishmaniases are important causes of morbidity and mortality in Brazil, and their diagnoses need to be improved. The use of monoclonal antibodies has ensured high specificity to immunodiagnosis. The development of an immunosensor, coupling a monoclonal antibody to a bioelectronic device capable of quickly detecting Leishmania sp. antigens both qualitatively and quantitatively, is a promising alternative for the diagnosis of leishmaniasis due to its high specificity, low cost, and portability, compared with conventional methods. The present work was aimed at developing an immunosensor-based assay for detecting Leishmania infantum antigens in tissues of infected hosts. Four hybridomas producing monoclonal antibodies against L. infantum had their specificity confirmed by enzyme-linked immunosorbent assay. These antibodies were immobilized on a gold surface, covered with a thin film of 2-aminoethanethiol (cysteamine) and glutaraldehyde, blocked with glycine, and placed into contact with extracts of L. infantum -infected and noninfected control hamster spleens. The assay was able to detect 1.8 × 10(4) amastigotes/g of infected tissue. These results demonstrated that this assay may be useful for quantifying L. infantum amastigotes in organs of experimental animals for studies on pathogenesis and immunity and that it is a promising tool for the development of a diagnostic method, based on antigen detection, of human and dog visceral leishmaniasis.