Metallic Metastable Hybrid 1T'/1T Phase Triggered Co,PSnS2 Nanosheets for High Efficiency Trifunctional Electrocatalyst.

The development of trifunctional electrocatalyst for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) with deeply understanding the mechanism to enhance the electrochemical performance is still a challenging task. In this work, the distorted metastable hybrid-phase induced 1T'/1T Co,PSnS2 nanosheets on carbon cloth (1T'/1T Co,PSnS2 @CC) is prepared and examined. The density functional theoretical (DFT) calculation suggests that the distorted 1T'/1T Co,PSnS2 can provide excellent conductivity and strong hydrogen adsorption ability. The electronic structure tuning and enhancement mechanism of electrochemical performance are investigated and discussed. The optimal 1T'/1T Co,PSnS2 @CC catalyst exhibits low overpotential of ≈94 and 219.7 mV at 10 mA cm-2 for HER and OER, respectively. Remarkably, the catalyst exhibits exceptional ORR activity with small onset potential value (≈0.94 V) and half-wave potential (≈0.87 V). Most significantly, the 1T'/1T Co,PSnS2 ||Co,PSnS2 electrolyzer required small cell voltages of ≈1.53, 1.70, and 1.82 V at 10, 100, and 400 mA cm-2 , respectively, which are better than those of state-of-the-art Pt-C||RuO2 (≈1.56 and 1.84 V at 10 and 100 mA cm-2 ). The present study suggests a new approach for the preparation of large-scalable, high performance hierarchical 3D next-generation trifunctional electrocatalysts.

Tailored Heterojunction Active Sites for Oxygen Electrocatalyst Promotion in Zinc-Air Batteries.

Rechargeable zinc-air batteries (ZABs) are promising energy storage systems due to their low-cost and safety. However, the working principle of ZABs is based on oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), which display sluggish kinetic and low stability. Herein, this work proposes a novel method to design a heterogeneous CoP/CoO electrocatalyst on mesopore nanobox carbon/carbon nanotube (CoP/CoO@MNC-CNT) that enriched active sites and synergistic effect. Moreover, the well-defined heterointerfaces could lower the energy barrier for intermediate species adsorption and promote OER and ORR electrochemical performances. The CoP/CoO@MNC-CNT electrocatalyst presents a high half-wave potential of 0.838 V for ORR and a small overpotential of 270 mV for OER. The ZABs-based CoP/CoO@MNC-CNT air-cathode shows an open-circuit voltage of 1.409 V, the long-term cycle life of 500 h with a small voltage difference change of 7.7%. Additionally, the flexible ZABs exhibit highly mechanical stability, demonstrating their application potential in wearable electronic devices.

A Wearable Microfluidic Sensing Patch for Dynamic Sweat Secretion Analysis.

Wearable sweat sensing is a rapidly rising research area driven by its promising potential in health, fitness, and diagnostic applications. Despite the growth in the field, major challenges in relation to sweat metrics remain to be addressed. These challenges include sweat rate monitoring for its complex relation with sweat compositions and sweat sampling for sweat dynamics studies. In this work, we present a flexible microfluidic sweat sensing patch that enhances real-time electrochemical sensing and sweat rate analysis via sweat sampling. The device contains a spiral-patterned microfluidic component that is embedded with ion-selective sensors and an electrical impedance-based sweat rate sensor on a flexible plastic substrate. The patch is enabled to autonomously perform sweat analysis by interfacing the sensing component with a printed circuit board that is capable of on-site signal conditioning, analysis, and transmission. Progressive sweat flow in the microfluidic device, governed by the pressure induced by the secreted sweat, enhances sweat sampling and electrochemical detection via a defined sweat collection chamber and a directed sweat route. The characteristic of the sweat rate sensor is validated through a theoretical simulation, and the precision and accuracy of the flow rate is verified with a commercial syringe pump and a Macroduct sweat collector. On-body simultaneous monitoring of ion (H+, Na+, K+, Cl-) concentration and sweat rate is also demonstrated for sensor functionality. This sweat sensing patch provides an integrated platform for a comprehensive sweat secretion analysis and facilitates physiological and clinical investigations by closely monitoring interrelated sweat parameters.

Low Pressure Vapor-assisted Solution Process for Tunable Band Gap Pinhole-free Methylammonium Lead Halide Perovskite Films.

Organo-lead halide perovskites have recently attracted great interest for potential applications in thin-film photovoltaics and optoelectronics. Herein, we present a protocol for the fabrication of this material via the low-pressure vapor assisted solution process (LP-VASP) method, which yields ~19% power conversion efficiency in planar heterojunction perovskite solar cells. First, we report the synthesis of methylammonium iodide (CH3NH3I) and methylammonium bromide (CH3NH3Br) from methylamine and the corresponding halide acid (HI or HBr). Then, we describe the fabrication of pinhole-free, continuous methylammonium-lead halide perovskite (CH3NH3PbX3 with X = I, Br, Cl and their mixture) films with the LP-VASP. This process is based on two steps: i) spin-coating of a homogenous layer of lead halide precursor onto a substrate, and ii) conversion of this layer to CH3NH3PbI3-xBrx by exposing the substrate to vapors of a mixture of CH3NH3I and CH3NH3Br at reduced pressure and 120 °C. Through slow diffusion of the methylammonium halide vapor into the lead halide precursor, we achieve slow and controlled growth of a continuous, pinhole-free perovskite film. The LP-VASP allows synthetic access to the full halide composition space in CH3NH3PbI3-xBrx with 0 ≤ x ≤ 3. Depending on the composition of the vapor phase, the bandgap can be tuned between 1.6 eV ≤ Eg ≤ 2.3 eV. In addition, by varying the composition of the halide precursor and of the vapor phase, we can also obtain CH3NH3PbI3-xClx. Films obtained from the LP-VASP are reproducible, phase pure as confirmed by X-ray diffraction measurements, and show high photoluminescence quantum yield. The process does not require the use of a glovebox.