Assessing applicability of two gridded precipitation datasets for hydrological simulation in a poorly gauged river basin towards supporting sustainable water resources management.

Reliable and accurate precipitation estimates are important for hydrological studies and sustainable water resource management. However, networks of rain gauges are often sparsely and unevenly distributed in many large river basins in the world including the Red River basin (RRB). Thus this study aimed to comprehensively evaluate the applicability of two widely used gridded precipitation products, gauge-based APHRODITE and gauge satellite-based GSMaP-Gauge, over the RRB using both statistical and hydrological assessment approaches. The accuracy assessment of the gridded precipitation datasets was performed by comparing with the reference precipitation dataset derived from the local weather stations. The hydrological performance of both gridded products was evaluated through the Variable Infiltration Capacity (VIC) hydrological modelling scheme for simulation of daily streamflow at the hydrological stations in the RRB. The results demonstrated that both gridded products could generally capture the spatiotemporal variation of the reference precipitation over the RRB during the period of 2005-2014, although both underestimated the reference precipitation. Results of statistical analysis showed that the APHRODITE data outperformed the GSMaP-Gauge data in precipitation estimation. The performance of the VIC model driven by the gridded precipitation products in streamflow simulation was satisfactory, although simulations forced with APHRODITE data displayed the better performance. Generally, the APHRODITE product showed its encouraging potential for hydrological studies over the RRB.

Steel slag quality control for road construction aggregates and its environmental impact: case study of Vietnamese steel industry-leaching of heavy metals from steel-making slag.

Steel slag is an industrial by product of steel manufacturing processes and has been widely utilized within civil and construction materials for road materials and environmental remediation in countries like Japan, USA, and European Union nations. However, the current utilization of steel slag in Vietnam is very low mainly because of lack of quality control of slag treatment and chances for reuse of treated steel slag. This paper presents the up to date steel slag production status in Vietnam through the extensive survey and sampling at seven large steel factories. The paper also highlights the environmental and quality control issues of these steel slags to use as road construction aggregates by assessing the heavy metals concentration in the leachate. The basic oxygen furnace (BOF) and electric arc furnace (EAF) slag samples were collected to evaluate leaching properties of metals leached from the slags. The two standardized batch leaching tests of steel slag roadbed material in Japan (JIS K 0058-1) and toxicity characteristics leaching procedure (TCLP-EPA method 1311) were performed to the evaluated the hazardous metals. The results of the leaching test show that almost all of the concentration of the metals in the leached solution does not exceed the National Standard for Industrial Wastewater Discharge (QCVN 40-2011). The pH and parameters such as total chromium, nickel, copper, lead, arsenic, and manganese differ from the two test methods. The acidic conditions employed in the EPA 1311 were not representative of condition excepted during slag reuse in road constructions because in the operation condition of the road, acidic liquid is absent. The leaching test results confirmed that JIS test which uses deionized water with gentle mixing prevents the slag sample from size degradation is suitable for the environmental assessment of steel slag use for roadbed material. This research suggests that the adjustment of pH value prior to disposal or reuse as base materials and official guideline should be promulgate by the authorities to ensure the leachate meet the surface water quality standard.

Study of aerosol optical properties at two urban areas in the north of Vietnam with the implication for biomass burning impacts.

The spatiotemporal distribution and characterization of aerosol optical properties in the north of Vietnam were investigated extensively using the long-term measurements obtained from Moderate Resolution Imaging Spectroradiometer (MODIS) (from 2010 to 2019) and two Aerosol Robotic Network (AERONET) stations (Nghia Do, Hanoi City, from 2010 to 2019 and Son La from 2012 to 2019) located in fast-developing urban areas. This study also analyzed the tendency of AOD over different wavelengths as well as the influences of meteorological parameters and boundary layer height (BLH) on AOD and Ångström exponent (AE). The annual mean AOD500 at Nghia Do and Son La stations were 0.81 and 0.78, respectively. Our results revealed the existence of particles emitted from anthropogenic activities in Hanoi and Son La with the dominance of fine particles (more than 90% of the AE440-870 were larger than 1). Besides, a high percentage of AE440-870 larger than or approximately 1.5 during the dry and transition months in Son La indicated the existence of biomass-burning aerosol particles due to forest fires and burning of agriculture residuals. The classification results for aerosol types showed the presence of both biomass burning and urban/industrial aerosol types at Nghia Do and Son La sites. Among the investigated meteorological parameters, surface solar radiation expressed a significant correlation with AE440-870 in all three seasons at the two sites due to the secondary formation of fine particles induced by the high solar radiation condition. The impacts of meteorological parameters and BLH on AOD were not observed simultaneously during three seasons at Nghia Do and Son La stations.

Shipboard and ground measurements of atmospheric particulate mercury and total mercury in precipitation over the Yellow Sea region.

The first ever shipboard measurements for atmospheric particulate mercury (Hg(p)) over the Yellow Sea and ground measurements for atmospheric Hg(p) and total mercury (THg) in precipitation at the remote sites (Deokjeok and Chengshantou) and the urban sites (Seoul and Ningbo) surrounding the Yellow Sea were carried out during 2007-2008. The Hg(p) regional background concentration of 56.3 ± 55.6 pg m-3 over the Yellow Sea region is much higher than the typical background concentrations of Hg(p) in terrestrial environments (<25 pg m-3) which implies significant impact of anthropogenic mercury emission sources from East Asia. The episodes of highly elevated Hg(p) concentrations at the Korean remote site were influenced through long-range transport from source regions in the Liaoning Province - one of China's most mercury-polluted regions and in the western region of North Korea. Interestingly, wet scavenging of atmospheric Hg(p) is the predominant mechanism regulating concentration of THg in precipitation at the Chinese sites; whereas, wet scavenging of gaseous oxidized mercury (GOM) might play the more important role than that of Hg(p) at the Korean sites. The highest annual wet and dry deposition fluxes of Hg were found at the Ningbo site. The comparison between wet and dry deposition fluxes suggested that dry deposition might play the more important role than wet deposition in Chinese urban areas (source regions); whereas, wet deposition is more important in Korean areas (downwind regions).

Influence of regional biomass burning on the highly elevated organic carbon concentrations observed at Gosan, South Korea during a strong Asian dust period.

PM2.5 carbonaceous particles were measured at Gosan, South Korea during 29 March-11 April 2002 which includes a pollution period (30 March-01 April) when the highest concentrations of major anthropogenic species (nss-SO4 (2-), NO3 (-), and NH4 (+)) were observed and a strong Asian dust (AD) period (08-10 April) when the highest concentrations of mainly dust-originated trace elements (Al, Ca, Mg, and Fe) were seen. The concentrations of elemental carbon (EC) measured in the pollution period were higher than those measured in the strong AD period, whereas an inverse variation in the concentrations of organic carbon (OC) was observed. Based on the OC/EC ratios, the possible source that mainly contributed to the highly elevated OC concentrations measured in the strong AD period was biomass burning. The influence of the long-range transport of smoke plumes emitted from regional biomass burning sources was evaluated by using MODIS (Moderate Resolution Imaging Spectroradiometer) satellite data for fire locations and the potential source contribution function analysis. The most potential source regions of biomass burning were the Primorsky and Amur regions in Far Eastern Russia and southeastern and southwestern Siberia, Russia. Further discussion on the source characteristics suggested that the high OC concentrations measured in the strong AD period were significantly affected by the smoldering phase of biomass burning. In addition to biomass burning, secondary OC (SOC) formed during atmospheric long-range transport should be also considered as an important source of OC concentration measured at Gosan. Although this study dealt with the episodic case of the concurrent increase of dust and biomass burning particles, understanding the characteristics of heterogeneous mixing aerosol is essential in assessing the radiative forcing of aerosol.

Species-specificity of DNA trimer densities in chromosomes and their use in the classification of closely related organisms.

16S rDNA sequences are conventionally used for classification of organisms. However, the use of these sequences is sometimes not successful, especially for closely related species. For better classification of these organisms, several methods that are genome sequence-based have been developed. Sequence alignment-based methods are tedious and time-consuming, as they need conserved coding sequences to be identified and deduced prior to sequence alignment. Likewise, method that relies on gene function needs genes to be assessed for function similarity. Other alignment-free methods, which are based on particular genome sequence properties, so far have been complex and not species-specific enough for classification of organisms below genus level. The present study found that the ratios of DNA trimer frequencies to chromosomal length were species-specific. Density of a trimer in a chromosomal sequence was defined as the average frequency of the trimer per 1 kbp. The species-specificity of trimer densities in chromosomes of many closely related bacteria was compared in parallel with 16S rDNA sequences in these same bacteria. The results of these comparisons indicate that trimer densities in chromosomes can be used to simply and efficiently classify the organisms below genus level.