Chemical Fractionations of Lead and Zinc in the Contaminated Soil Amended with the Blended Biochar/Apatite.

Heavy metal contamination in agricultural land is an alarming issue in Vietnam. It is necessary to develop suitable remediation methods for environmental and farming purposes. The present study investigated the effectiveness of using peanut shell-derived biochar to remediate the two heavy metals Zn and Pb in laboratory soil assays following Tessier's sequential extraction procedure. The concentration of heavy metals was analyzed using Inductively coupled plasma mass spectrometry (ICP-MS). This study also compared the effectiveness of the blend of biochar and apatite applied and the mere biochar amendment on the chemical fractions of Pb and Zn in the contaminated agricultural soil. Results have shown that the investigated soil was extremely polluted by Pb (3047.8 mg kg−1) and Zn (2034.3 mg kg−1). In addition, the pH, organic carbon, and electrical conductivity values of amended soil samples increased with the increase in the amendment's ratios. The distribution of heavy metals in soil samples was in the descending order of carbonate fraction (F2) > residue fraction (F5) > exchangeable fraction (F1) > Fe/Mn oxide fraction (F3) > organic fraction (F4) for Pb and F5 ≈ F2 > F1 > F3 > F4 for Zn. The peanut shell-derived biochar produced at 400 °C and 600 °C amended at a 10% ratio (PB4:10 and PB6:10) could significantly reduce the exchangeable fraction Zn from 424.82 mg kg−1 to 277.69 mg kg−1 and 302.89 mg kg−1, respectively, and Pb from 495.77 mg kg−1 to 234.55 mg kg−1 and 275.15 mg kg−1, respectively, and immobilize them in soil. Amending the biochar and apatite combination increased the soil pH, then produced a highly negative charge on the soil surface and facilitated Pb and Zn adsorption. This study shows that the amendment of biochar and biochar blended with apatite could stabilize Pb and Zn fractions, indicating the potential of these amendments to remediate Pb and Zn in contaminated soil.

Concentrations, profiles, emission inventory, and risk assessment of chlorinated benzenes in bottom ash and fly ash of municipal and medical waste incinerators in northern Vietnam.

Concentrations and congener profiles of seven di- to hexachlorinated benzenes (CBzs) were characterized in bottom ash and fly ash samples collected simultaneously from one medical waste incinerator (MEWI) and one municipal waste incinerator (MUWI) in northern Vietnam. Total concentrations of seven CBzs in the fly ash samples ranged from 6.98 to 34.4 (median 19.1) ng g-1 in the MEWI, and ranged from 59.1 to 391 (median 197) ng g-1 in the MUWI. Concentrations of CBzs in the bottom ash samples of the MEWI (median 1.95; range 1.53-5.98 ng g-1) were also lower than those measured in the MUWI samples (median 17.4; range 14.5-42.6 ng g-1). Levels of CBzs in the fly ash samples were significantly higher than concentrations measured in the bottom ash samples, partially indicating the low-temperature catalytic formation of these pollutants in post-combustion zone. In general, higher chlorinated congeners (e.g., hexachlorobenzene, pentachlorobenzene, and 1,2,4,5-tetrachlorobenzene) were more abundant than lower chlorinated compounds. However, compositional profiles of CBzs were different between the ash types and incinerators and even between the same sample types of different sampling days, suggesting that the formation of CBzs in these incinerators is complicated and influenced by many factors. Emission factors and annual emission amounts of CBzs were estimated for the two incinerators by using actually measured data of CBz concentrations in the ash. Daily intake doses and cancer risks of ash-bound CBzs estimated for workers in the two incinerators were generally lower than critical values, but cancer risks caused by other relevant pollutants (e.g., polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and dioxin-related compounds) were not considered.

Levels, profiles, and emission characteristics of chlorobenzenes in ash samples from some industrial thermal facilities in northern Vietnam.

Chlorobenzenes (CBzs) are unintentionally produced organic contaminants from different thermal industrial processes, which have been scarcely surveyed in Asian developing countries including Vietnam. In this study, residue concentrations, profiles, emission factors, and annual emissions of seven chlorobenzene compounds were investigated in fly ash and bottom ash samples of some industrial facilities including brick making plant, steel and zinc production plants, and industrial and municipal waste incinerators in northern Vietnam. Total concentrations of seven CBzs in the ash samples were generally decreased in the order: industrial waste incinerator > municipal waste incinerator > steel-making plant > brick making plant. Emission pattern of CBzs varied considerably among different industrial plants, with 1,2- and 1,3-dichloro-, 1,2,3,4-tetrachloro-, and hexachlorobenzene as predominant compounds in the industrial waste incinerators and steel-making plants. Emission factors of CBzs estimated for the fly ash and bottom ash samples were in the range of 118-2020 and 5.3-22,600 µg ton-1, respectively. Average annual emissions (AEs) of total seven CBzs estimated for fly ash and bottom ash in the investigated plants were in the range of 154-54,300 and 20,160-161,400 mg year-1, respectively. The AEs of CBzs estimated for fly ash in the steel-making plant were higher than those in the waste incinerators. Meanwhile, CBz emissions for bottom ash were the highest in the steel-making plant, followed by the industrial and municipal waste incinerators. This is among the first studies on the emission characteristics of both low and highly chlorinated benzenes from industrial activities in Vietnam.