Cost-effective capillary electrophoresis with contactless conductivity detection for quality control of beta-lactam antibiotics.

A simple and inexpensive approach for determination of various antimicrobial drugs using a purpose-made compact capillary electrophoresis (CE) instrument with capacitively coupled contactless conductivity detection (C4D) is reported. The objective of the work is to propose an affordable and easily-implemented tool for quality control and detection of counterfeiting of antibiotic formulations in resource constrained developing countries. The design of the purpose-made CE-C4D system was improved according to the feedback from over 10 years of use of our previous instrument. CE-C4D methods were for the first time developed to analyze ß-lactam-based antibiotics commonly used in Vietnam, including single- ß-lactam antibiotics (i.e. Cephalexin, Cefotaxime Sodium, Cefixime and Sulbactam) as well as ß-lactams co-formulated with Sulbactam (i.e. Amoxicillin, Ampicillin, Cefoperazone and Sulbactam). Single ß-lactam antibiotics were analyzed using a background electrolyte (BGE) composed of Tris/Ace (10 mM, pH 7.8) whereas ß-lactam - Sulbactam combinations were simultaneously separated using a BGE containing Tris/Ace (10 mM, pH 7.5). The best achieved detection limits were 2.0 mg/L and 1.0 mg/L for these two groups, respectively. Good agreement between results obtained from CE-C4D and standard confirmation methods (LCMS) was achieved, with a coefficient of determination, r2, of 0.9991. The applicability of the developed CE-C4D method was demonstrated for quality control of 24 ß-lactam-based antimicrobial drugs available in Vietnam.

Fast Determination of Auramine O in Food by Adsorptive Stripping Voltammetry.

The electrochemical behaviour of auramine O on the hanging mercury drop electrode has been investigated by cyclic and square wave voltammetry method. Reduction peak of auramine O was irreversible and adsorptive on the hanging mercury drop electrode. The optimal conditions were chosen to be Briton-Robinson buffer pH 9.0, accumulation potential -0.5 V vs. Ag/AgCl/KCl, accumulation time 60 s, pulse amplitude 250 mV·s-1, and frequency 50 Hz. At the optimum experimental conditions, the peak of the target analyte was sharp and asymmetric. The linearity of the peak current depending on the concentration ranged from 4.0 × 10-8 to 6.4 × 10-7 mol L-1. The limit of detection and limit of quantitation were 2.46 × 10-8 mol L-1 and 8.21 × 10-8 mol L-1, respectively. The recovery and relative standard deviation were 94.9% and 2.0% (n = 5). The developed method was successfully applied to determine auramine O in chicken samples with an appropriate sample preparation.