Variable residual activity of K-Othrine® PolyZone and Actellic® 300 CS in semi-field and natural conditions in the Democratic Republic of the Congo.

BACKGROUND: Indoor Residual Spray (IRS) against vector mosquitoes is a primary means for combating malaria transmission. To combat increased patterns of resistance to chemicals against mosquito vectors, alternative candidate insecticide formulations should be screened. With mortality as the primary endpoint, the persistence of residual efficacy of a polymer-enhanced pyrethroid suspension concentrate containing deltamethrin (K-Othrine® PolyZone-KOPZ) applied at 25 mg active ingredient (ai)/m2 was compared with a microencapsulated organophosphate suspension formulation of pirimiphos-methyl (Actellic® 300CS-ACS) applied at 1 g ai/m2. METHODS: Following standard spray application, periodic contact bioassays were conducted for at least 38 weeks on four types of wall surfaces (unbaked clay, baked clay, cement, and painted cement) sprayed with either KOPZ or ACS in simulated semi-field conditions. Similarly, two types of existing walls in occupied houses (painted cement and baked clay) were sprayed and examined. A colonized strain of female Anopheles arabiensis mosquitoes were exposed to treated or untreated surfaces (controls) for 30 min. For each wall surface test period, 40 treatment mosquitoes (4 cones × 10) in semi-field and 90 (9 cones × 10) in 'natural' house conditions were used per wall. 30 mosquitoes (3 cones × 10) on a matching unsprayed surface served as the control. Insecticide, wall material, and sprayed location on wall (in houses) were compared by final mortality at 24 h. RESULTS: Insecticide, wall material, and sprayed location on wall surface produced significant difference for mean final mortality over time. In semi-field conditions, KOPZ produced a 72% mean mortality over a 38-week period, while ACS gave 65% (p < 0.001). Painted cement wall performed better than other wall surfaces throughout the study period (73% mean mortality). In the two occupied houses, KOPZ provided a mean mortality of 88%, significantly higher than ACS (p < 0.001). KOPZ provided an effective residual life (≥ 80% mortality) between 7.3 and 14 weeks on experimental walls and between 18.3 and 47.2 weeks in houses, while ACS persisted between 3 and 7.6 weeks under semi-field conditions and between 7.1 and 17.3 weeks in houses. Household painted cement walls provided a longer effective residual activity compared to baked clay for both formulations. Greater mortality was recorded at the top and middle sections of sprayed wall compared to the bottom portion near the floor. CONCLUSION: KOPZ provided longer residual activity on all surfaces compared to ACS. Painted cement walls provided better residual longevity for both insecticides compared to other surfaces. Insecticides also performed better in an occupied house environment compared to semi-field constructed walls. This study illustrates the importance of collecting field-based observations to determine appropriate product active ingredient formulations and timing for recurring IRS cycles.

Indoor residual spray bio-efficacy and residual activity of a clothianidin-based formulation (SumiShield® 50WG) provides long persistence on various wall surfaces for malaria control in the Democratic Republic of the Congo.

BACKGROUND: Bio-efficacy and residual activity of SumiShield® 50WG (50%, w/w) with active ingredient clothianidin, a neonicotinoid compound, was assessed using an insecticide-susceptible laboratory strain of Anopheles arabiensis. Implications of the findings are examined in the context of potential alternative insecticides for indoor residual spraying in Lualaba Province, Democratic Republic of the Congo. METHODS: Contact surface bioassays were conducted for 48 weeks on four types of walls (unbaked clay, baked clay, cement, painted cement) in simulated semi-field experimental conditions using two different doses of clothianidin active ingredient (200 mg ai/sq m and 300 mg ai/sq m). Additionally, two types of walls (painted cement and baked clay) were examined in occupied houses using the 300-mg dosage. Laboratory-reared An. arabiensis were exposed to treated surfaces or untreated (controls) for 30 min. Mortality was recorded at 24-h intervals for 120 h. RESULTS: Under semi-field experimental conditions, there was no significant difference in mortality over time between the two doses of clothianidin. The mortality rates remained above 60% up to 48 weeks on all four wall surface types. The formulation performed better on cement and unbaked clay with a mean final mortality rate above 90%. Under natural conditions, there was no significant difference in response between baked clay and painted cement walls with a mean final mortality rate above 90%. The insecticide also performed significantly better in natural settings compared to semi-field experimental conditions. CONCLUSION: Depending on the type of experimental surface, the residual activity of the two doses of clothianidin was between 28 and 48 weeks based on a 60% mortality endpoint. Clothianidin at 300 mg ai/sq m applied on two house walls (baked clay or painted cement) performed equally well (> 80% mortality) on both surfaces up to week 41 (approximately 9.5 months). Extended bioassay holding periods (up to 120 h) may present with excess natural mortality in the untreated controls, thus complicating analysis.

School-based malaria prevalence: informative systematic surveillance measure to assess epidemiological impact of malaria control interventions in the Democratic Republic of the Congo.

BACKGROUND: In southern Democratic Republic of the Congo, malaria transmission is stable with seasonal fluctuations. Different measurements can be used to monitor disease burden and estimate the performance of control programmes. Repeated school-based malaria prevalence surveys (SMPS) were conducted from 2007 to 2014 to generate up-to-date surveillance data and evaluate the impact of an integrated vector control programme. METHODS: Biannual SMPS used a stratified, randomized and proportional sampling method. Schools were randomly selected from the entire pool of facilities within each Health Area (HA). Subsequently, school-children from 6 to 12 years of age were randomly selected in a proportional manner. Initial point-of-care malaria diagnosis was made using a rapid detection test. A matching stained blood film was later examined by expert microscopy and used in the final analysis. Data was stratified and analysed based on age, survey time and location. RESULTS: The baseline SMPS (pre-control in 2007) prevalence was approximately 77%. From 2009 to 2014, 11,628 school-children were randomly screened. The mean age was 8.7 years with a near equal sex ratio. After exclusion, analysis of 10,493 students showed an overall malaria prevalence ratio of 1.92 in rural compared to urbanized areas. The distribution of Plasmodium falciparum malaria was significantly different between rural and urban HAs and between end of wet season and end of dry season surveys. The combined prevalence of single P. falciparum, Plasmodium malariae and Plasmodium ovale infections were 29.9, 1.8 and 0.3% of those examined, respectively. Only 1.8% were mixed Plasmodium species infections. From all microscopically detected infections (3545 of 10,493 samples examined), P. falciparum represented 88.5%, followed by P. malariae (5.4%) and P. ovale (0.8%). Cases with multiple species represented 5.3% of patent infections. Malaria prevalence was independent of age and gender. Control programme performance contributed to a significant decrease in mean P. falciparum infection density in urban compared to rural locations. Some rural areas remained highly refractory to control measures (insecticide-treated bed nets, periodic indoor residual spraying). CONCLUSION: The SMPS is a useful longitudinal measurement for estimating population malaria prevalence and demonstrating disease burden and impact of control interventions. SMPS can identify refractory areas of transmission and thus prioritize control strategies accordingly.