Removal of malachite green from aqueous solutions by electrocoagulation/peanut shell adsorption coupling in a batch system.

A electrocoagulation (EC)/peanut shell (PS) adsorption coupling technique was studied for the removal of malachite green (MG) in our present work. The addition of an appropriate PS dosage (5 g/L) resulted in remarkable increase in the removal efficiency of MG at lower current density and shorter operating time compared with the conventional EC process. The effect of current density, pH of MG solution, dosage of PS and initial concentration of MG were also investigated. The maximum removal efficiency of MG was 98% under optimum conditions in 5 min. And it was 23% higher than that in EC process. Furthermore, the unit energy demand (UED) and the unit electrode material demand (UEMD) were calculated and discussed. The results demonstrated that the EC/PS adsorption coupling method achieved a reduction of 94% UED and UEMD compared with EC process.

Removal of Acid Black 1 and Basic Red 2 from aqueous solutions by electrocoagulation/Moringa oleifera seed adsorption coupling in a batch system.

The removal of Acid Black 1 (AB1) and Basic Red 2 (BR2) from aqueous solutions via an electrocoagulation (EC)/Moringa oleifera seeds (MOS) adsorption coupling process by using aluminum and stainless steel electrode in a batch reactor is described in this study. The influences of the operational parameters, i.e. current density, MOS dosage, and dye initial concentration, on degree of color removal were studied, and the unit energy demand, the unit electrode material demand, and the charge loading were calculated and discussed. The amounts of adsorbent and energy consumption were considered as main criteria of process evaluation, and ideal conditions were chosen. The addition of an appropriate MOS dosage (0.6 g/L for AB1 and 5 g/L for BR2) resulted in faster decolorization of dyes especially at lower current densities and was simultaneously accompanied by a significant reduction in contact time compared to the conventional simple EC process. The coupling process achieved degree of removals above 99.3% and 94% for AB1 and BR2, respectively. The EC/MOS coupling technique could be recommended to replace the conventional simple EC because of its high degree of removal, short contact time, and low energy consumption.