Assessing the Sealing Performance and Clinical Outcomes of Endodontic Treatment in Patients with Chronic Apical Periodontitis Using Epoxy Resin and Calcium Salicylate Seals.

Background and Objectives: Recognizing the significance of a hermetic apical seal for successful root canal treatment, the present investigation aimed to evaluate two sealing materials through an in vitro analysis, as well as to ascertain the clinical outcomes of patients treated with these two sealers in an in vivo setting. Materials and Methods: For the in vitro part of the study, two control groups of thirty monoradicular teeth were obturated with two sealers. Then, the sealers' performance was tested based on a predefined protocol. Group A included 30 patients treated with an epoxy oligomer resin-based sealer (Adseal, MetaBiomed), while Group S comprised 30 patients treated with a polymeric calcium salicylate-based sealer (Sealapex, Kerr). Samples were sectioned and evaluated under the microscope to determine the sealer's tightness by measuring the dye penetration into the root canal filling. For the in vivo part, a prospective study was designed to include 60 patients with chronic apical periodontitis in two endodontic treatment groups, using the same two sealers. Results: The in vitro analysis found that dye penetration in Group A was 0.82 mm (±0.428), while in Group S, the dye penetration was statistically significantly deeper, being 1.23 mm (±0.353). In the in vivo part of the study, the periapical index (PAI) significantly decreased 6 months after endodontic treatment, with 80.0% of patients in Group A having a PAI score of 2 compared to only 56.7% in Group S (p-value = 0.018). Similarly, tooth mobility scores significantly decreased after treatment, but with no difference between groups. The marginal bone loss decreased significantly more in the Adseal group compared to the Sealapex group (23.3% vs. 50.0%, p-value = 0.032). At the same time, 40.0% of patients in Group S had failed tooth healing compared to only 13.3% in Group A (p-value = 0.048). Conclusions: The in vitro study showed that Adseal had a better sealing capacity and a lower degree of dye penetration compared to Sealapex. However, on clinical evaluation in the in vivo study, both patient groups exhibited significant improvements in periapical index, tooth mobility scores, and pain reduction following endodontic treatment. Nevertheless, patients treated with Adseal showed a significantly greater improvement in PAI values, tooth mobility, and teeth healing after treatment. Overall, Adseal, as an endodontic sealer, may provide better sealing capabilities and enhanced clinical outcomes in the treatment of chronic apical periodontitis.

Evaluation of the Shaping Ability of Three Thermally Treated Nickel-Titanium Endodontic Instruments on Standardized 3D-printed Dental Replicas Using Cone-Beam Computed Tomography.

Background and Objectives: The aim of the present study is to compare the efficacy of three root canal preparation systems in the shaping of 3D-printed root canal replicas of single rooted teeth. Materials and Methods: Sixty 3D-printed root canal replicas were produced and divided into three groups, each consisting of twenty samples. Each group was shaped with a different instrument: Reciproc Blue R25/08 (VDW GmbH, Munich, Gemany), WaveOne Gold Primary 25/07 (Dentsply Sirona, Ballaigues, Switzerland), and ProTaper Gold F2 25/08 (Denstply Sirona). To ensure the reproducibility of pre- and post-operative CBCT images of the root canals, the endodontic printed replicas were placed in a mould of silicon impression material. A cone-beam computed tomography (CBCT) software was used to compare pre- and post-instrumentation images collected at three levels of the root canal length: 3, 6, and 9 mm from the apical foramen. The amount of transportation, centring ability, and curvature angle after shaping were evaluated for each system. The results were statistically analysed and compared using one-way analysis of variance (ANOVA). Results: Regarding the transportation of the root canal after shaping, significant differences between groups at 3 mm (p = 0.010721) and 6 mm (p = 0.000046) were recorded in the mesio-distal direction, while in the bucco-lingual significant differences were only observed at 6 mm (p = 0.000554). Reciproc Blue removed more dentin from the mesial and buccal wall of the root canal. When evaluating the centring ability of the three systems, significant differences were observed between the groups at the level of 9 mm (p = 0.037258) in the mesio-distal direction, and at the level of 6 mm (p = 0.038197) in the bucco-lingual direction. Significant differences of the canal curvature angle after shaping were also observed between groups (p = 0.000001). Reciproc Blue straightened the curvature the most, while ProTaper Gold the least. Conclusions: All systems produced minor root canal transportation. No instrument was able to achieve a perfect centring preparation of the root canal. All systems produced a small degree of root canal straightening.

En-face optical coherence tomography analysis of gold and silver nanoparticles in endodontic irrigating solutions: An in vitro study.

Optical coherence tomography (OCT) is a non-invasive, non-radioactive optical diagnostic method based on low-coherence interferometry, which achieves images with different orientation. In dentistry, its major advantage is represented by the localization and characterization of the smallest defects in hard dental tissues, dental materials and of the smallest details in dental anatomy (supplementary canals, recesses, isthmuses, or intra-radicular connections). The aim of the present in vitro study was to evaluate using c-scan en-face optical coherence tomography, the optical opacity, and the distribution inside the root canal lumen of several extracted human teeth of silver and gold nanoparticles from special irrigating solutions used in endodontic treatment. Twelve root canals from 5 human teeth were instrumented using the ProTaper Universal system after initial negotiation with hand K-files ISO no. 10 and rotary nickel-titanium PathFile instruments. An initial c-scan OCT analysis was performed for each sample to confirm that the root canal lumen was empty from radiopaque materials (Group 1). Teeth were first irrigated with NanoCare Plus (Group 2) and then with NanoCare Gold (Group 3) and C-scans were repeated after each irrigation method. The OCT investigation started at the tooth apex, at a depth of 1 mm from its tip. Subsequently, 100 slices of 10 microns were obtained from each root canal. Images were captured and then analyzed with ImageJ software to calculate the level of grey inside the root canal lumen. The highest values of grey were obtained in the samples irrigated with NanoCare Gold after NanoCare Plus (Group 3). The present study proved that both nanoparticles inserted in root canal irrigants were evidenced through OCT imagistic analysis due to their optical opacity, which allowed their highlighting in an empty root canal lumen, after the endodontic treatment was performed and the root canal was cleaned and shaped using specific protocols.

External cervical resorption: Radiological diagnosis and literature (Review).

External cervical resorption (ECR) is a relatively unknown and insidious pathology characterized by the loss of hard dental tissues such as: Enamel, cementum and dentine due to clastic function. It begins as a localized resorptive process that initiates on the area of the root beneath the epithelial attachment and the coronal part of the alveolar process, involving vital and non-vital tissues. Despite the fact that there are several potential predisposing factors related to ECR, its aetiology still remains poorly understood and more research is needed to establish the cause-and-effect relationship of all the etiological factors. Improved radiographic detection using cone-beam computed tomography (CBCT) is required in order to correctly classify and assess this entity. This provides a three-dimensional insight into the lesion, regarding the location, the size, the depth and the circumferential spread of the ECR defect. It also allows establishment of the most efficacious treatment plan and management. The purpose of this literature review is to cover the relevant literature concerning the etiology, pathogenesis, clinical and radiological presentation and management of ECRs (based on the CBCT findings).

Endodontic fillings evaluated using en face OCT, microCT and SEM.

OBJECTIVES: The goal of endodontic therapy is mechanically cleaning and shaping the root canal system, the removal of organic and inorganic debris followed by sealing with permanent filling materials. MATERIALS AND METHODS: Therefore, the aim of this in vitro study was to engage three imagistic methods: (i) en face (ef) time domain (TD) optical coherence tomography (OCT), (ii) micro-computed tomography (µCT), and (iii) scanning electron microscopy (SEM), in terms of their efficiency in assessing the quality of endodontic fillings. So far, is settled that efOCT images can identify defects∕voids in several of the investigated root canal fillings and identify gaps of 50 µm. RESULTS: The results delivered by µCT technology also showed several imperfections of the endodontic filling but also at the interfaces formed by the sealer and the root canal walls. SEM investigations highlights the complex form of the interface formed the endodontic filling material and the walls of the root canal, as well as shortcomings of the materials from several samples. Gaps of 50 µm are identified with efOCT. CONCLUSIONS: The net advantage of OCT technology, in respect to the other two technologies consists in its non-invasiveness. The OCT axial resolution is also sufficient to see the material gaps. Another advantage of efOCT investigations is that they allow real-time imaging of complex arrangement at the interfaces of the filling material with dentinal root.

Photomicrographic evaluation of the apical sealing capacity of three types of gutta-percha master cones: an in vitro study.

The purpose of this study was to compare the apical sealing capacity of three types of gutta-percha master cones of the same apical size and different tapers following root canal preparation with nickel-titanium ProTaper Universal rotary instruments and microstructural replication with System B and Obtura III. Thirty extracted human incisors having one single straight root canal (type I Weine) were instrumented with rotary ProTaper to an F3 (30/.09) and gauged to confirm a final apical size of #30. Teeth were divided into three groups (n = 10) to be obturated as follows: Group 1: master cone Meta 0.06 taper/AH Plus, Group 2: master cone fine-medium Autofit 0.08 taper/AH Plus, and Group 3: master cone ProTaper F3 0.09 taper/AH Plus. The chosen technique was the continuous wave of compaction (System B and Obtura III). Teeth were embedded in acrylic and incrementally reduced at 0.5 and 1.0 mm from the apical foramina in a grinding machine for metallographic samples. Sections were examined and digitally photographed under a metallographic optical microscope in normal and polarized light and the images were processed. The total cross-sectional area of the root canal, the gutta-percha/sealer/voids' areas were quantified for each sample and statistically compared using one-way ANOVA and Kruskal-Wallis tests. No statistically significant differences between groups were observed (P > 0.05); however, the mean percentage of the gutta-percha-filled area was slightly higher in Group 1 at both levels of observation. Despite different tapers, all the three types of cones provided a good sealing capacity in the last apical millimeter of the root canal, with good gutta-percha-sealer ratio and few or no voids.