Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
J Biomech ; 127: 110701, 2021 10 11.
Artigo em Inglês | MEDLINE | ID: mdl-34461366

RESUMO

There exist limited data to guide the development of methodologies for evaluating impact resilience of prosthetic ankle-foot systems, particularly regarding human-device interaction in ecologically valid scenarios. The purpose of this study was to biomechanically characterize foot-ground interactions during drop-landings among Service members with and without unilateral transtibial limb loss. Seven males with, and seven males without, unilateral transtibial limb loss completed six drop-landing conditions consisting of all combinations of three heights (20 cm, 40 cm, 60 cm) and two loads (with and without a 22.2 kg weighted vest). Peak ground reaction forces (GRF), vertical GRF loading rate and impulse, as well as ankle-foot, knee, and hip joint negative (absorption) powers and work were compared across groups (i.e., contralateral side and prosthetic side vs. uninjured controls) by height and load conditions. Loading occurred primarily in the vertical direction, and increased with increasing drop height and/or with added load. Vertical GRFs were overall ~ 15% smaller on the prosthetic side (vs. controls) with similar loading rates across limbs/groups. From the most challenging condition (i.e., 60 cm with 22 kg load), ankle-foot absorption energies on the prosthetic side were 64.6 (7.2) J; corresponding values were 187.4 (8.9) J for the contralateral limb and 161.2 (6.7) J among uninjured controls. Better understanding biomechanical responses to drop-landings in ecological scenarios will help inform future iterations of mechanical testing methodologies for evaluating impact resilience of prosthetic ankle-foot systems (enhancing prescription criteria and return-to-activity considerations) as well as identifying and mitigating risk factors for long-term secondary complications within the contralateral limb (e.g., joint degeneration).


Assuntos
Amputados , Membros Artificiais , Articulação do Tornozelo , Fenômenos Biomecânicos , Humanos , Joelho , Articulação do Joelho , Masculino
2.
PLoS One ; 13(9): e0202884, 2018.
Artigo em Inglês | MEDLINE | ID: mdl-30208040

RESUMO

Many Service members and Veterans with lower-limb amputations have the potential for high function and the desire to resume physically demanding occupations that require them to carry heavy loads (e.g., military service, firefighters, farmers, ranchers, construction workers). However, it is currently unclear which prosthetic feet best accommodate heavy load carriage while also providing good overall function and mobility during unweighted activities. The main objective of this study was to investigate the ability of currently available prosthetic ankle-foot systems to accommodate weighted walking by examining the mechanical characteristics (i.e., forefoot stiffness) and dynamic function (i.e., rocker radius, effective foot length ratio, and late-stance energy return) of prosthetic feet designed for high activity users. Load versus deflection curves were obtained for nine prosthetic ankle-foot systems using a servohydraulic test frame and load cell. Effective roll-over shape characteristics and late-stance energy return measures were then obtained using quantitative gait analysis for three users with unilateral, transtibial amputation. Results from mechanical and dynamic testing showed that although forefoot stiffness varied across the nine feet investigated in this study, changes measured in roll-over shape radius and effective foot length ratio were relatively small in response to weighted walking. At the same time, prosthetic feet with more compliant forefoot keel structures appeared to provide more late-stance energy return compared to feet with stiffer forefoot keel structures. These results suggest that prosthetic ankle-foot systems with compliant forefoot keel structures may better accommodate weighted walking by reducing the metabolic cost of physically demanding activities. However, to more fully understand the biomechanical and functional implications of these results, other factors, such as the residual-limb strength of the user and the overall stiffness profile of the prosthetic foot, should also be considered.


Assuntos
Membros Artificiais , , Fenômenos Mecânicos , Caminhada , Adulto , Tornozelo , Humanos , Teste de Materiais , Suporte de Carga
3.
PLoS One ; 13(9): e0204512, 2018.
Artigo em Inglês | MEDLINE | ID: mdl-30256851

RESUMO

Previous work suggests that to restore postural stability for individuals with lower-limb amputation, ankle-foot prostheses should be designed with a flat effective rocker shape for standing. However, most commercially available ankle-foot prostheses are designed with a curved effective rocker shape for walking. To address the demands of both standing and walking, we designed a novel bimodal ankle-foot prosthesis that can accommodate both functional modes using a rigid foot plate and an ankle that can lock and unlock. The primary objective of this study was to determine if the bimodal ankle-foot system could improve various aspects of standing balance (static, dynamic, and functional) and mobility in a group of Veterans with lower-limb amputation (n = 18). Standing balance was assessed while subjects completed a series of tests on a NeuroCom Clinical Research System (NeuroCom, a Division of Natus, Clackamas, OR), including a Sensory Organization Test, a Limits of Stability Test, and a modified Motor Control Test. Few statistically significant differences were observed between the locked and unlocked ankle conditions while subjects completed these tests. However, in the absence of visual feedback, the locked bimodal ankle appeared to improve static balance in a group of experienced lower-limb prosthesis users whose PLUS-M mobility rating was higher than approximately 73% of the sample population used to develop the PLUS-M survey. Given the statistically significant increase in mean equilibrium scores between the unlocked and locked conditions (p = 0.004), future testing of this system should focus on new amputees and lower mobility users (e.g., Medicare Functional Classification Level K1 and K2 prosthesis users). Furthermore, commercial implementation of the bimodal ankle-foot system should include a robust control system that can automatically switch between modes based on the user's activity.


Assuntos
Tornozelo , Membros Artificiais , , Equilíbrio Postural , Adulto , Idoso , Amputados , Fenômenos Biomecânicos , Retroalimentação Sensorial/fisiologia , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Satisfação do Paciente , Equilíbrio Postural/fisiologia , Desenho de Prótese , Sensação/fisiologia , Posição Ortostática , Veteranos , Caminhada/fisiologia
4.
PLoS One ; 12(3): e0173423, 2017.
Artigo em Inglês | MEDLINE | ID: mdl-28278172

RESUMO

In recent years, numerous prosthetic ankle-foot devices have been developed to address the demands of sloped walking for individuals with lower-limb amputation. The goal of this study was to compare the performance of a passive, hydraulic ankle-foot prosthesis to two related, non-hydraulic ankles based on their ability to minimize the socket reaction moments of individuals with transtibial amputation during a range of sloped walking tasks. After a two-week accommodation period, kinematic data were collected on seven subjects with a transtibial amputation walking on an instrumented treadmill set at various slopes. Overall, this study was unable to find significant differences in the torque at the distal end of the prosthetic socket between an ankle-foot prosthesis with a hydraulic range-of-motion and other related ankle-foot prosthesis designs (rigid ankle, multiaxial ankle) during the single-support phase of walking. In addition, socket comfort and perceived exertion were not significantly different for any of the ankle-foot prostheses tested in this study. These results suggest the need for further work to determine if more advanced designs (e.g., those with microprocessor control of hydraulic features, powered ankle-foot designs) can provide more biomimetic function to prosthesis users.


Assuntos
Tornozelo , , Fenômenos Mecânicos , Próteses e Implantes , Caminhada/fisiologia , Adulto , Feminino , Humanos , Hidrodinâmica , Masculino , Pessoa de Meia-Idade , Desenho de Prótese
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...