Charge dissipation in e-beam lithography with Novolak-based conducting polymer films.

Charging of common resist materials during electron beam (e-beam) writing leads to deflection of the electron beam path, which can result in significant pattern displacement. Here we report a new conducting polymer to eliminate charging. A common approach is to place the conducting layer underneath the e-beam resist layer. Conductivity equal or greater than 10(-4) S cm(-1) has been reported to prevent pattern displacement. Some other properties such as a flat surface layer, chemical inertness and insolubility in both the top resist solvent and the developer are also necessary. The way to achieve all these properties consisted in synthesizing a conducting polymer inside an insulating polymer to form an interpenetrating polymer network (IPN) which could combine their properties. Novolak was used as the host polymer and terthiophene (3T) as the monomer to polymerize. Cu(ClO(4))(2) initiates simultaneously the oxidative polymerization of the 3T and its subsequent doping inside Novolak during the bake step in a one-step reaction. Solvent-resistant and homogeneous conducting films with smooth surfaces were achieved. The conductivity was of the order of 10(-2) S cm(-1). Patterning of the top resist was carried out without disturbing its lithographic performance.

Spinal anesthesia in an extremely low birth weight infant.

A case of spinal anesthesia in an extremely low birth weight male infant (body weight of 930 g at time of surgery) is presented. He was born prematurely at a gestational age of 27 weeks because of a placenta tumor and had to undergo inguinal herniotomy at 34 weeks postconceptional age. He had bronchopulmonary dysplasia and oxygen supply was still required because of frequent deterioration of oxygen saturation. Spinal anesthesia was performed successfully without any complications. Relevant aspects concerning the technique and management of spinal anesthesia in preterm infants are discussed.

Enhancement of an insufficient dye-formation in the ninhydrin reaction by a suitable post treatment process.

A study of the reaction between ninhydrin and alanine has been carried out taking into account that, adhered on the surface of a dry porous medium such as paper, a quasi-heterogeneous reaction has to take place. Instead of amino acids released from human sweat glands, aqueous solutions of alanine were taken to deliver a given amount of amino acid to the sample. The dye density, obtained after using a standard development process, could noticeably be increased by setting a drop of water on the dye dot, thus indicating that not all the alanine had been used for dye formation during the usually applied process. The incomplete reaction can be explained by the problem of bringing the reactants into contact with each other when both are in the solid phase in the porous surrounding. The temporary presence of water allows a reorientation of the insoluble reactants. With fingerprints an increase in both the rate of development and the final dye density could be obtained when the sample was post treated after the developing process with the blank solvent, thus also the background coloration could be decreased. The ideas presented in this paper may form the basis for a modification of developing processes with ninhydrin in order to increase the proportion of amino acids present (in the sample) used in dye formation without data loss.

Synthesis, cyclic voltammetry, and photophysical properties of a bridged o-phenylenediamine-C(60) dyad.

The synthesis, complete spectroscopic characterization, cyclic voltammetry, and photophysical measurements of a new o-phenylenediamine-C(60) dyad are described. By using a tether strategy, only a single regioisomer was obtained. Cyclic voltammetry measurements indicate that the two electroactive groups do not interact in their singlet ground states. Photophysical investigations reveal a rapid photoinduced electron transfer between the singlet excited state of the fullerene acceptor and the o-phenylenediamine donor, yielding a charge-separated radical pair.

Reproducible Preparation of Silver Sols with Small Particle Size Using Borohydride Reduction: For Use as Nuclei for Preparation of Larger Particles.

Silver colloids are useful as substrates for surface enhanced Raman spectroscopy (SERS). The results are, however, seldom quantitative as the distribution of particle sizes in silver suspensions can vary from sample to sample and thus the SERS spectra can vary in intensity. Monodisperse silver sols are relatively difficult to prepare compared with gold or latex colloids as the nucleation process is difficult to control. Previous workers have used a system where small particles are formed in one process and grown in a second reaction. In this paper a simple procedure is outlined by which the small, "seed" particles (starter sols) can be prepared; this method is simpler and more reproducible than that used in the past. The process by which the sols can be grown is not discussed in detail here as it is the subject of a forthcoming publication. Copyright 1999 Academic Press.

Cloning and expression of an Arabidopsis gene encoding a putative peroxisomal ascorbate peroxidase.

An Arabidopsis 14-3-3 protein, AFT1, was used as a 'bait' in the two-hybrid system to identify its interacting proteins. One of the candidate proteins, APX3, was identified as a putative peroxisomal membrane-bound ascorbate peroxidase. Ascorbate peroxidases are important defense enzymes that protect plant cells from oxidative stress damage. DNA blot analysis indicates that APX3 is encoded by a single-copy gene in the Arabidopsis genome. RNA blot analyses show that APX3 transcript levels increase slightly in response to cold, UV light, and treatments with hydrogen peroxide and paraquat. The activity of APX3 in Arabidopsis may be controlled in two ways: its enzymatic activity through protein-protein interactions and its transcription by transcriptional or posttranscriptional regulation.