Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 70
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Chempluschem ; 89(6): e202300773, 2024 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-38598306

RESUMO

Organic semiconductor small molecules and polymers often incorporate heteroatoms into their chemical structures to affect the electronic properties of the material. A particular design philosophy has been to use these heteroatoms to influence torsional potentials, since the overlap of adjacent π-orbitals is most efficient in planar systems and is critical for charge delocalization in these systems. Since these design rules became popular, the messages from the earlier works have become lost in a sea of reports of "conformational locks", where the non-covalent interactions have relatively small contributions to planarizing torsional potentials. Greater influences can be found in the stabilization by extended conjugation, consideration of steric repulsion, and the interactions involving solubilizing chains and neighboring molecules or polymer chains in condensed phases.

2.
Adv Sci (Weinh) ; 11(27): e2308281, 2024 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-38520718

RESUMO

Organic mixed ionic-electronic conductors (OMIECs) have emerged as promising materials for biological sensing, owing to their electrochemical activity, stability in an aqueous environment, and biocompatibility. Yet, OMIEC-based sensors rely predominantly on the use of composite matrices to enable stimuli-responsive functionality, which can exhibit issues with intercomponent interfacing. In this study, an approach is presented for non-enzymatic glucose detection by harnessing a newly synthesized functionalized monomer, EDOT-PBA. This monomer integrates electrically conducting and receptor moieties within a single organic component, obviating the need for complex composite preparation. By engineering the conditions for electrodeposition, two distinct polymer film architectures are developed: pristine PEDOT-PBA and molecularly imprinted PEDOT-PBA. Both architectures demonstrated proficient glucose binding and signal transduction capabilities. Notably, the molecularly imprinted polymer (MIP) architecture demonstrated faster stabilization upon glucose uptake while it also enabled a lower limit of detection, lower standard deviation, and a broader linear range in the sensor output signal compared to its non-imprinted counterpart. This material design not only provides a robust and efficient platform for glucose detection but also offers a blueprint for developing selective sensors for a diverse array of target molecules, by tuning the receptor units correspondingly.


Assuntos
Técnicas Biossensoriais , Técnicas Eletroquímicas , Glucose , Polímeros , Polímeros/química , Técnicas Biossensoriais/métodos , Técnicas Eletroquímicas/métodos
3.
Chem Mater ; 35(21): 9029-9039, 2023 Nov 14.
Artigo em Inglês | MEDLINE | ID: mdl-38027547

RESUMO

A series of polythiophenes with varying side chain density was synthesized, and their electrical and thermoelectric properties were investigated. Aligned and non-aligned thin films of the polymers were characterized in the neutral and chemically doped states. Optical and diffraction measurements revealed an overall lower order in the thin films with lower side chain density, also confirmed using polarized optical experiments on aligned thin films. However, upon doping the non-aligned films, a sixfold increase in electrical conductivity was observed for the polythiophene with the lowest side chain density compared to poly(3-hexylthiophene) (P3HT). We found that the improvement in conductivity was not due to a larger charge carrier density but an increase in charge carrier mobility after doping with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). On the other hand, doped aligned films did not show the same trend; lower side chain density instead led to a lower conductivity and Seebeck coefficient compared to those for P3HT. This was attributed to the poorer alignment of the polymer thin films with lower side chain density. The study demonstrates that optimizing side chain density is a synthetically simple and effective way to improve electrical conductivity in polythiophene films relevant to thermoelectric applications.

4.
Nat Commun ; 14(1): 7577, 2023 Nov 28.
Artigo em Inglês | MEDLINE | ID: mdl-38016963

RESUMO

Despite the growing interest in dynamic behaviors at the frequency domain, there exist very few studies on molecular orientation-dependent transient responses of organic mixed ionic-electronic conductors. In this research, we investigated the effect of ion injection directionality on transient electrochemical transistor behaviors by developing a model mixed conductor system. Two polymers with similar electrical, ionic, and electrochemical characteristics but distinct backbone planarities and molecular orientations were successfully synthesized by varying the co-monomer unit (2,2'-bithiophene or phenylene) in conjunction with a novel 1,4-dithienylphenylene-based monomer. The comprehensive electrochemical analysis suggests that the molecular orientation affects the length of the ion-drift pathway, which is directly correlated with ion mobility, resulting in peculiar OECT transient responses. These results provide the general insight into molecular orientation-dependent ion movement characteristics as well as high-performance device design principles with fine-tuned transient responses.

5.
Beilstein J Org Chem ; 19: 1694-1712, 2023.
Artigo em Inglês | MEDLINE | ID: mdl-38025084

RESUMO

This review article provides a comprehensive overview of recent advancements in electron transport materials derived from quinoxaline, along with their applications in various electronic devices. We focus on their utilization in organic solar cells (OSCs), dye-sensitized solar cells (DSSCs), organic field-effect transistors (OFETs), organic-light emitting diodes (OLEDs) and other organic electronic technologies. Notably, the potential of quinoxaline derivatives as non-fullerene acceptors in OSCs, auxiliary acceptors and bridging materials in DSSCs, and n-type semiconductors in transistor devices is discussed in detail. Additionally, their significance as thermally activated delayed fluorescence emitters and chromophores for OLEDs, sensors and electrochromic devices is explored. The review emphasizes the remarkable characteristics and versatility of quinoxaline derivatives in electron transport applications. Furthermore, ongoing research efforts aimed at enhancing their performance and addressing key challenges in various applications are presented.

6.
Angew Chem Int Ed Engl ; 62(29): e202304390, 2023 Jul 17.
Artigo em Inglês | MEDLINE | ID: mdl-37204070

RESUMO

Thiophenes functionalised in the 3-position are ubiquitous building blocks for the design and synthesis of organic semiconductors. Their non-centrosymmetric nature has long been used as a powerful synthetic design tool exemplified by the vastly different properties of regiorandom and regioregular poly(3-hexylthiophene) owing to the repulsive head-to-head interactions between neighbouring side chains in the regiorandom polymer. The renewed interest in highly electron-rich 3-alkoxythiophene based polymers for bioelectronic applications opens up new considerations around the regiochemistry of these systems as both the head-to-tail and head-to-head couplings adopt near-planar conformations due to attractive intramolecular S-O interactions. To understand how this increased flexibility in the molecular design can be used advantageously, we explore in detail the geometrical and electronic effects that influence the optical, electrochemical, structural, and electrical properties of a series of six polythiophene derivatives with varying regiochemistry and comonomer composition. We show how the interplay between conformational disorder, backbone coplanarity and polaron distribution affects the mixed ionic-electronic conduction. Ultimately, we use these findings to identify a new conformationally restricted polythiophene derivative for p-type accumulation-mode organic electrochemical transistor applications with performance on par with state-of-the-art mixed conductors evidenced by a µC* product of 267 F V-1 cm-1 s-1 .

7.
Adv Mater ; 35(23): e2300252, 2023 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-36918256

RESUMO

Tailoring organic semiconductors to facilitate mixed conduction of ionic and electronic charges when interfaced with an aqueous media has spurred many recent advances in organic bioelectronics. The field is still restricted, however, by very few n-type (electron-transporting) organic semiconductors with adequate performance metrics. Here, a new electron-deficient, fused polycyclic aromatic system, TNR, is reported with excellent n-type mixed conduction properties including a µC* figure-of-merit value exceeding 30 F cm-1 V-1 s-1 for the best performing derivative. Comprising three naphthalene bis-isatin moieties, this new molecular design builds on successful small-molecule mixed conductors; by extending the molecular scaffold into the oligomer domain, good film-forming properties, strong π-π interactions, and consequently excellent charge-transport properties are obtained. Through judicious optimization of the side chains, the linear oligoether and branched alkyl chain derivative bgTNR is obtained which shows superior mixed conduction in an organic electrochemical transistor configuration including an electron mobility around 0.3 cm2 V-1 s-1 . By optimizing the side chains, the dominant molecular packing can be changed from a preferential edge-on orientation (with high charge-transport anisotropy) to an oblique orientation that can support 3D transport pathways which in turn ensure highly efficient mixed conduction properties across the bulk semiconductor film.

8.
Nanoscale ; 15(14): 6793-6801, 2023 Apr 06.
Artigo em Inglês | MEDLINE | ID: mdl-36946985

RESUMO

The introduction of oligoether side chains onto a polymer backbone can help to stabilise polymeric dispersions in water without the necessity of surfactants or additives when conjugated polymer nanoparticles are prepared. A series of poly(3-hexylthiophene) (P3HT) derivatives with different content of a polar thiophene derivative 3-((2-methoxyethoxy)methyl)thiophene was interrogated to find the effect of the polar chains on the stability of the formed nanoparticles, as well as their structural, optical, electrochemical, and electrical properties. Findings indicated that incorporation of 10-20 percent of the polar side chain led to particles that are stable over a period of 42 days, with constant particle size and polydispersity, however the particles from the polymer with 30 percent polar side chain showed aggregation effects. The polymer dispersions showed a stronger solid-like behaviour in water with decreasing polar side chain content, while thin film deposition from water was found to afford globular morphologies and crystallites with more isotropic orientation compared to conventional solution-processed films. As a proof-of-principle, field-effect transistors were fabricated directly from the aqueous dispersions demonstrating that polymers with hydrophilic moieties can be processed in water without the requirement of surfactants.

9.
Angew Chem Weinheim Bergstr Ger ; 135(29): e202304390, 2023 Jul 17.
Artigo em Inglês | MEDLINE | ID: mdl-38528843

RESUMO

Thiophenes functionalised in the 3-position are ubiquitous building blocks for the design and synthesis of organic semiconductors. Their non-centrosymmetric nature has long been used as a powerful synthetic design tool exemplified by the vastly different properties of regiorandom and regioregular poly(3-hexylthiophene) owing to the repulsive head-to-head interactions between neighbouring side chains in the regiorandom polymer. The renewed interest in highly electron-rich 3-alkoxythiophene based polymers for bioelectronic applications opens up new considerations around the regiochemistry of these systems as both the head-to-tail and head-to-head couplings adopt near-planar conformations due to attractive intramolecular S-O interactions. To understand how this increased flexibility in the molecular design can be used advantageously, we explore in detail the geometrical and electronic effects that influence the optical, electrochemical, structural, and electrical properties of a series of six polythiophene derivatives with varying regiochemistry and comonomer composition. We show how the interplay between conformational disorder, backbone coplanarity and polaron distribution affects the mixed ionic-electronic conduction. Ultimately, we use these findings to identify a new conformationally restricted polythiophene derivative for p-type accumulation-mode organic electrochemical transistor applications with performance on par with state-of-the-art mixed conductors evidenced by a µC* product of 267 F V-1 cm-1 s-1.

10.
Mater Horiz ; 9(6): 1649-1657, 2022 Jun 06.
Artigo em Inglês | MEDLINE | ID: mdl-35421883

RESUMO

The way in which conjugated polymers pack in the solid state strongly affects the performance of polymer-based optoelectronic devices. However, even for the most crystalline conjugated polymers the precise packing of chains within the unit cell is not well established. Here we show that by performing resonant X-ray diffraction experiments at the sulfur K-edge we are able to resolve the tilting of the planar backbones of crystalline poly(3-hexylthiophene) (P3HT) within the unit cell. This approach exploits the anisotropic nature of the X-ray optical properties of conjugated polymers, enabling us to discern between different proposed crystal structures. By comparing our data with simulations based on different orientations, a tilting of the planar conjugated backbone with respect to the side chain stacking direction of 30 ± 5° is determined.

11.
Diagnostics (Basel) ; 12(2)2022 Feb 10.
Artigo em Inglês | MEDLINE | ID: mdl-35204548

RESUMO

Albuminuria is a sensitive marker for renal dysfunction. Urinary dipstick tests are frequently used to screen for urinary abnormalities in the emergency department (ED). The aim of this prospective cohort study is to evaluate the usefulness of urinary dipstick testing as a screening tool for albuminuria in the ED setting and to determine the persistency of albuminuria identified in the acute setting. Urinary dipstick tests and spot urine samples were obtained simultaneously for analysis of the urinary albumin-creatinine ratio (ACR). Participants with positive dipsticks for protein were invited for a second urinalysis four to six weeks after admission. The study included 234 patients admitted to the ED. Urinalysis was performed on 178 patients of which 46% (n = 82) had positive urinary dipstick tests for proteinuria. The sensitivity and specificity of the dipstick test were low (72.7% and 55.7% respectively) when compared to the ACR. Of the 82 patients with positive dipsticks at admission, 35 were available for follow-up. We observed a significant reduction in ACR at follow-up when compared to ACR at admission (p = 0.004). This paper concludes that urinary dipstick tests are not a reliable means to screen for albuminuria in the ED setting.

12.
Adv Mater ; 34(14): e2107829, 2022 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-35075720

RESUMO

Organic mixed ionic and electronic conductors are of significant interest for bioelectronic applications. Here, three different isoindigoid building blocks are used to obtain polymeric mixed conductors with vastly different structural and electronic properties which can be further fine-tuned through the choice of comonomer unit. This work shows how careful design of the isoindigoid scaffold can afford highly planar polymer structures with high degrees of electronic delocalization, while subtle structural modifications can control the dominant charge carrier (hole or electron) when probed in organic electrochemical transistors. A combination of experimental and computational techniques is employed to probe electrochemical, structural, and mixed ionic and electronic properties of the polymer series which in turn allows the derivation of important structure-property relations for this promising class of materials in the context of organic bioelectronics. Ultimately, these findings are used to outline robust molecular-design strategies for isoindigo-based mixed conductors that can support efficient p-type, n-type, and ambipolar transistor operation in an aqueous environment.

13.
Adv Mater ; 34(22): e2102988, 2022 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-34418878

RESUMO

Molecular doping-the use of redox-active small molecules as dopants for organic semiconductors-has seen a surge in research interest driven by emerging applications in sensing, bioelectronics, and thermoelectrics. However, molecular doping carries with it several intrinsic problems stemming directly from the redox-active character of these materials. A recent breakthrough was a doping technique based on ion-exchange, which separates the redox and charge compensation steps of the doping process. Here, the equilibrium and kinetics of ion exchange doping in a model system, poly(2,5-bis(3-alkylthiophen-2-yl)thieno(3,2-b)thiophene) (PBTTT) doped with FeCl3 and an ionic liquid, is studied, reaching conductivities in excess of 1000 S cm-1 and ion exchange efficiencies above 99%. Several factors that enable such high performance, including the choice of acetonitrile as the doping solvent, which largely eliminates electrolyte association effects and dramatically increases the doping strength of FeCl3 , are demonstrated. In this high ion exchange efficiency regime, a simple connection between electrochemical doping and ion exchange is illustrated, and it is shown that the performance and stability of highly doped PBTTT is ultimately limited by intrinsically poor stability at high redox potential.

14.
Chem Rev ; 122(4): 4397-4419, 2022 02 23.
Artigo em Inglês | MEDLINE | ID: mdl-34491034

RESUMO

Small-molecule organic semiconductors have displayed remarkable electronic properties with a multitude of π-conjugated structures developed and fine-tuned over recent years to afford highly efficient hole- and electron-transporting materials. Already making a significant impact on organic electronic applications including organic field-effect transistors and solar cells, this class of materials is also now naturally being considered for the emerging field of organic bioelectronics. In efforts aimed at identifying and developing (semi)conducting materials for bioelectronic applications, particular attention has been placed on materials displaying mixed ionic and electronic conduction to interface efficiently with the inherently ionic biological world. Such mixed conductors are conveniently evaluated using an organic electrochemical transistor, which further presents itself as an ideal bioelectronic device for transducing biological signals into electrical signals. Here, we review recent literature relevant for the design of small-molecule mixed ionic and electronic conductors. We assess important classes of p- and n-type small-molecule semiconductors, consider structural modifications relevant for mixed conduction and for specific interactions with ionic species, and discuss the outlook of small-molecule semiconductors in the context of organic bioelectronics.


Assuntos
Eletrônica , Semicondutores
15.
ACS Omega ; 6(50): 34525-34531, 2021 Dec 21.
Artigo em Inglês | MEDLINE | ID: mdl-34963937

RESUMO

The adsorption structure of truxenone on Cu(111) was determined quantitatively using normal-incidence X-ray standing waves. The truxenone molecule was found to chemisorb on the surface, with all adsorption heights of the dominant species on the surface less than ∼2.5 Å. The phenyl backbone of the molecule adsorbs mostly parallel to the underlying surface, with an adsorption height of 2.32 ± 0.08 Å. The C atoms bound to the carbonyl groups are located closer to the surface at 2.15 ± 0.10 Å, a similar adsorption height to that of the chemisorbed O species; however, these O species were found to adsorb at two different adsorption heights, 1.96 ± 0.08 and 2.15 ± 0.06 Å, at a ratio of 1:2, suggesting that on average, one O atom per adsorbed truxenone molecule interacts more strongly with the surface. The adsorption geometry determined herein is an important benchmark for future theoretical calculations concerning both the interaction with solid surfaces and the electronic properties of a molecule with electron-accepting properties for applications in organic electronic devices.

16.
Phys Chem Chem Phys ; 23(12): 7462-7471, 2021 Mar 28.
Artigo em Inglês | MEDLINE | ID: mdl-33876106

RESUMO

The processability and optoelectronic properties of organic semiconductors can be tuned and manipulated via chemical design. The substitution of the popular alkyl side chains by oligoethers has recently been successful for applications such as bioelectronic sensors and photocatalytic hydrogen evolution. Beyond the differences in polarity, the carbon-oxygen bond in oligoethers is likely to render the system softer and more prone to dynamical disorder that can be detrimental to charge transport for example. In this context, we use neutron spectroscopy as a master method of probe, in addition to characterisation techniques such as X-ray diffraction, differential scanning calorimetry and polarized optical microscopy to study the effect of the substitution of n-hexyl (Hex) chains by triethylene glycol (TEG) chains on the structural dynamics of two organic semiconducting materials: a phenylene-bithiophene-phenylene (PTTP) small molecule and a fluorene-co-dibenzothiophene (FS) polymer. Counterintuitively, inelastic neutron scattering (INS) reveals a general softening of the modes of PTTP and FS materials with Hex chains, pointing towards an increased dynamical disorder in the Hex-based systems. However, temperature-dependent X-ray and neutron diffraction as well as INS and differential scanning calorimetry evidence an extra reversible transition close to room temperature for PTTP with TEG chains. The observed extra structural transition, which is not accompanied by a change in birefringence, can also be observed by quasi-elastic neutron scattering (QENS). A fastening of the TEG chains dynamics is observed in the case of PTTP and not FS. We therefore assign this transition to the melt of the TEG chains. Overall the TEG chains are promoting dynamical order at room temperature, but if crystallising, may introduce an extra reversible structural transition above room temperature leading to thermal instabilities. Ultimately, a deeper understanding of chain polarity and structural dynamics can help guide new materials design and navigate the intricate balance between electronic charge transport and aqueous swelling that is being sought for a number of emerging organic electronic and bioelectronic applications.

17.
ACS Appl Mater Interfaces ; 13(5): 6470-6479, 2021 Feb 10.
Artigo em Inglês | MEDLINE | ID: mdl-33527828

RESUMO

Diodes fabricated using a blend of poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester (6-80 µm thick) as an organic semiconductor component achieved consistent 4 MeV α particle detection. Current-voltage characteristics and current-time measurements were obtained under α irradiation and in its absence. Steady-state and transient (time-of-flight) photoconduction measurements were additionally performed. Low-bias (<20 V) α particle detection gain-efficiency products of order 10-2 were measured. The α particle detection was achieved reproducibly, reversibly, and repeatably in different devices of varying organic semiconductor layer thicknesses using both the steady-state and time-dependent (dynamic) diode responses. Conductive gain, due to trapped electrons, increased the α particle gain-efficiency product in both forward and reverse bias conditions as well as increasing steady-state photoconduction. The device thickness was optimized to maximize the gain-efficiency product by matching the penetration depth of the α particle, obtained by modeling, to the organic semiconductor layer thickness. Very high confidence α particle detection was achieved (with signal-to-noise ratios exceeding 20) under optimized device dimensions and drive conditions. Hecht function fitting of the gain-efficiency product versus electric field data returns mobility-lifetime products of order 10-6-10-7 cm2 V-1. This work demonstrates that solution-processed organic semiconductor diodes are viable for low-voltage α particle detection.

18.
Nat Rev Chem ; 4(2): 66-77, 2020 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-37128048

RESUMO

Organic semiconductors are solution-processable, lightweight and flexible and are increasingly being used as the active layer in a wide range of new technologies. The versatility of synthetic organic chemistry enables the materials to be tuned such that they can be incorporated into biological sensors, wearable electronics, photovoltaics and flexible displays. These devices can be improved by improving their material components, not only by developing the synthetic chemistry but also by improving the analytical and computational techniques that enable us to understand the factors that govern material properties. Judicious molecular design provides control of the semiconductor frontier molecular orbital energy distribution and guides the hierarchical assembly of organic semiconductors into functional films where we can manipulate the properties and motion of charges and excited states. This Review describes how molecular design plays an integral role in developing organic semiconductors for electronic devices in present and emerging technologies.

19.
J Phys Chem A ; 123(8): 1548-1557, 2019 Feb 28.
Artigo em Inglês | MEDLINE | ID: mdl-30698964

RESUMO

The isomerization of aliphatic amine radical cations via intermediate [cyclopropane-NH3]+• and [cyclopropane-amine]+• ion-neutral complexes was studied experimentally with double-focusing mass spectrometers and computationally with composite ab initio methods. The results examine and extend Audier's suggestion that primary amine radical cations with alkyl substituents at the ß- and/or γ-carbon atoms isomerize via transient complexes of NH3 and alkyl cyclopropanes; these are formed by ring closure of the easily accessible γ-distonic isomers. Ionized amines with substituents at the α-carbon may react analogously when trialkyl cyclopropane complexes can be formed. Isomerization via complex intermediates is a major reaction pathway when the internal energy of the amine radical cation is less than that required for simple CC-bond cleavage. Complexes of unsubstituted or monosubstituted ionized cyclopropanes rarely contribute to the isomerization reactions. Secondary and tertiary amine radical cations do not undergo isomerization via cyclopropane intermediates, whereas aliphatic ether radical cations do.

20.
Chempluschem ; 84(9): 1384-1390, 2019 09.
Artigo em Inglês | MEDLINE | ID: mdl-31944047

RESUMO

A series of copolymers containing a glycolated 1,4-dithienyl-2,3,5,6-tetrafluorophenylene unit copolymerized with thiophene, bithiophene, thienothiophene and 1,2,4,5-tetrafluorobenzene comonomer units were designed and synthesised by direct heteroarylation polymerisation. The optical, electrochemical, electrochromic and solid-state structural properties of the copolymers were investigated. The copolymers exhibit stable redox properties in organic solvents and promising redox properties in thin film configuration with an aqueous electrolyte. Finally, the potential of the copolymers as active materials in organic electrochemical transistors (OECTs) was assessed, and promising performance was shown as an accumulation-mode OECT material with a peak transconductance of 0.17 mS and a good on/off ratio of 105 for the thiophene copolymer.


Assuntos
Derivados de Benzeno/síntese química , Fluorbenzenos/química , Compostos Heterocíclicos/síntese química , Polímeros/química , Tiofenos/química , Derivados de Benzeno/química , Compostos Heterocíclicos/química , Estrutura Molecular , Polimerização , Transistores Eletrônicos
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...