Synthesis of iron-doped TiO2 for degradation of reactive Orange16.

In this study the optimum conditions for preparing the iron-doped TiO2 nanoparticles were investigated. Samples were synthesized by sol-gel impregnation method. Three effective parameters were optimized using Taguchi method, consisted of: (i) atomic ratios of Fe to Ti; (ii) sintering temperature; (iii) sintering time. The characterization of samples was determined using X-ray diffraction, BET- specific surface area, UV- Vis reflectance spectra (DRS) and scanning electron microscope (SEM). The XRD patterns of the samples indicated the existence of anatase crystal phase in structure. UV- Vis reflectance spectra showed an enhancement in light absorbance in the visible region (wavelength > 400 nm) for iron-doped samples. The photocatalytic activity of samples was investigated by the degradation of RO 16 (RO 16) dye under UV irradiation. The results illustrated that the photocatalytic activity of iron-doped TiO2 was more than pure TiO2, because of the smaller crystal size, grater BET surface area and higher light absorption ability.

The optimum conditions for synthesis of Fe3O4/ZnO core/shell magnetic nanoparticles for photodegradation of phenol.

The photocatalysis of phenol was studied using Fe3O4/ZnO core/shell magnetic nanoparticles (MNPs). The photocatalysts were synthesized by coating of ZnO onto the magnetite by precipitation method and characterized by XRD, SEM and FTIR measurements. Using the Taguchi method, this study analyzes the effect of parameters such as calcinations time, calcinations temperature and molar ratio of Fe3O4:ZnO on the photo activity of Fe3O4/ZnO MNPs. XRD and FTIR analysis confirm that coating process was done successfully. SEM images show that the average particle size of synthesized Fe3O4/ZnO nanoparticles was about 50 nm. The phenol removal efficiency of 88% can be achieved by using a photocatalyst which is synthesized through the optimum conditions: calcinations temperature of 550°C, calcinations time of 2 hours and molar ratio of 1:10 for Fe3O4:ZnO.

Optimized photocatalytic degradation of Reactive Blue 2 by TiO2/UV process.

The photocatalytic degradation of synthetic dye solution of Reactive Blue 2 was investigated using UV irradiation in aqueous suspension of nanotitania as photocatalyst and H2O2 as electron acceptor in a slurry photoreactor. To determine the optimum condition of decolorization, the influential parameters including initial dye concentration, catalyst quantity, hydrogen peroxide concentration, pH value and UV light intensity were evaluated using the Taguchi statistical method. The results indicated that compared to the other parameters, UV light intensity was the most effective. The theoretically predicted value of decolorization efficiency (95.48%) was confirmed by the experimental value (95.22%). The mineralization was considered significant with regard to the obtained values of total organic carbon (TOC) analysis (92.52%) and chemical oxygen demand (COD) analysis (94.05%) in the optimum condition. Investigations were also carried out to determine the appropriate adsorption isotherm and kinetic model in the optimum condition. The obtained optimum condition for dye removal was finally examined applying a real sample of textile wastewater containing the dye.