RESUMO
Layered Ni-rich lithium transition metal oxides are promising cathode materials for high-energy-density lithium-ion batteries. These cathodes, however, suffer from rapid performance decay under high-voltage operation. In this work, the electrochemical properties and structural evolution of the LiNi0.8 Mn0.1 Co0.1 O2 (NMC811) cathode upon high-voltage cycling are investigated. The results show that the NMC811 cathode not only experiences surface evolution with the formation of Li-deficient rock-salt layers, but also suffers from drastic intragranular structural changes inside bulk grains after high-voltage cycling. Direct evidence for the formation of transition-metal/Li disordering domains with uneven Li content and lattice plane distortion at the internal grains of 4.6 V-cycled NMC811 are provided with their atomic ordering and spatial distribution clearly resolved. The complex intragranular structural changes impede Li+ diffusion inside bulk material, resulting in kinetic limitation and capacity loss. The results demonstrate that the high-voltage cycling would induce severe structural degradation at the grain interior of the cathode material beyond surface evolution, which contributes significantly to the rapid performance decay of the NMC811 cathode. The findings provide new insights for developing effective countermeasures to mitigate this degradation pathway.
RESUMO
The conventional polyvinylidene fluoride (PVDF) binder works well with the graphite anode, but when combined with silicon in composites to increase the energy density of Li-ion batteries, it results in severe capacity fade. Herein, by using scanning electron microscopy and energy-dispersive X-ray spectroscopy analyses, we reveal that this failure stems from the loss of connectivity between the silicon (or its agglomerates), graphite, and PVDF binder because of the mechanical stresses experienced during battery cycling. More importantly, we reveal for the first time that the PVDF binder undergoes chemical decomposition during the cycling of not only the composite but also the Si-only or even graphite-only electrodes despite the excellent battery performance of the latter. Through X-ray photoemission electron microscopy and X-ray photoelectron spectroscopy techniques, LiF was identified as the predominant decomposition product. We show that the distribution of LiF in the electrodes due to the differences in the interactions between PVDF and either Si or graphite could correlate with the performance of the battery. This study shows that the most suitable binder for the composite electrode is a polymer with a good chemical interaction with both graphite and silicon.
