Multifocal periapical cemental dysplasia in periodontal Ehlers-Danlos syndrome combined with leukoencephalopathy in the mutation of c.890G > a, G297D [pEDS].

Periodontal Ehlers-Danlos syndrome (pEDS) is a rare disorder caused by heterozygous mutations in complement 1 subunit genes C1R and C1S. To date, 148 cases have been described in the literature.We describe a case of a suspected de novo-mutation of pEDS with generalized Periapical cemental dysplasia (PCD) and cerebral leukoencephalopathy.

Customized Allogeneic Bone Augmentation Improves Esthetic Outcome in Anteromaxillary Dental Implantation.

Purpose: In cases of severe atrophic maxilla or maxillary involution, augmentation is necessary for implant-supported prosthetics. Using bone grafts is a standard procedure, and using customized allogeneic bone blocks may be a predictable alternative before dental implantation. Clinical Findings. This case study shows the digital workflow, including a preimplantological augmentation by a customized allogeneic block, followed by soft tissue optimization and template-based dental implantation, after six months of healing. It is part of a three-year follow-up study on the resorption rate of allogeneic bone blocks. Outcomes. Allogeneic bone augmentation is an alternative treatment option to autologous bone grafts. It allows predictable advanced backward planning (ABP) even in the maxillary esthetic zone. Diameter-reduced implants show long-term stability of a minimum of three years after loading and excellent results of prosthetic fixtures. Conclusion: Prefabricated customized allogeneic blocks for augmentation may increase the fitting accuracy of the graft, decrease morbidity, and reduce the operation time in esthetic maxillary rehabilitation.

Optimised Implant Selection Using Digital Volume Tomography (DVT) Osteodensitometry.

PURPOSE: The density of the jaw bone has an inhomogeneous distribution and, even within partial volumes, varies more or less strongly from the size of typical implants. Consequently, the primary stability of implants using conventional techniques can only ever be determined postimplantation. The aim of the present case report is to present digital volume tomography (DVT) osteodensitometry as a procedure for assessing the primary stability preimplantation and to evaluate its benefits. METHODS: An orthopantomogram (OPT) and vertical sections, including bone density measurement, were obtained from a DVT in the course of preimplantological diagnosis. Conventional implant planning and densitometric simulation were performed on this basis. RESULTS: Densitometric simulation enabled assessment of the bone density at the interface to the implant body preimplantation. This procedure provides not only an overall value (averaged density) but also allocation of bone areas with different densities to the adjacent areas on the implant surface. This then allows the implant with the best possible macroscopic geometry and optimum position to be selected, with the aim of maximising primary stability. In the present case, the maximum torques during insertion confirmed the densitometric values recorded in advance. CONCLUSION: DVT osteodensitometry enables selection of an implant optimised to bone density distribution. At the same time, the point at which loading occurs can already be defined at the planning stage, thanks to the predictable primary stability. A standard integration of DVT osteodensitometry in the algorithms of implant planning software thus seems desirable.

Advanced backward planning with custom-milled individual allogeneic block augmentation for maxillary full-arch osteoplasty and dental implantation:a 3-year follow-up.

In the case of maxillary involution, augmentation is necessary for implant-supported prosthetics. The use of bone grafts is standard; customized allogeneic bone blocks may be a predictable alternative before dental implantation. For maxillary full-arch reconstruction, this case shows a horse-shoe augmentation by four allogeneic blocks, followed by guided dental implantation and fixed prosthetics after 6 months of healing. Using allogeneic blocks is an option for full-arch maxillary augmentation and comparable with autologous bone grafts. There is no donor site comorbidity. Bone height is stable for a minimum of 3 years after loading with resorption less than 10% in vertical, buccolingual, and mesiodistal directions. Short-implants allow for the long-term stability of prosthetic fixtures. Prefabricated customized allogeneic blocks for augmentation may increase the fitting accuracy of the graft, decrease morbidity, and lower operation time in maxillary full-arch reconstruction. The percentage of resorption after 3 years is comparable to the commonly used iliac crest.

Multiple periapical dysplasias analyzed by cone-beam-computer tomography and 99Tcm-Scintigraphy.

Periapical cemental dysplasia (PCD) is considered a non-neoplastic proliferation of fibrous tissues and cementum-like hard tissues, usually occurring in the periapical regions of teeth. PCD is characterized by the presence of vital pulp and is often accidentally discovered during a general radiographic survey. PCD may arise from the tissue of odontogenic origin or occur as a reactive process in the periapical tissue. Multilocular occurrences in both jaws are rare. However, we encountered a case of multiple PCDs by orthopantomography, which showed different degrees of maturation in the mandible and maxilla by osteodensitometric detection via cone-beam computed tomography (CB-CT) validated by Tc-99m bone-scintigraphy (BS). Biopsies confirmed the radiological results. CB-CT osteodensitometry allows for the categorization and assessment of different stages of PCD maturation from beginning to florid, detection of remittent osseous changes, and evaluation in the clinical follow-up. When using the local cortical bone as a reference value of 100%, periapical dysplasias show density values of 75% in the mandible and 80% in the maxilla. Early classification of PCD is possible with CB-CT osteodensitometry.

How precise are oral splints for frameless stereotaxy in guided ear, nose, throat, and maxillofacial surgery: a cadaver study.

BACKGROUND: Computer-assisted surgery optimises accuracy and serves to improve precise surgical procedures. We validated oral splints with fiducial markers by testing them against rigid bone markers. METHODS: We screwed twenty bone anchors as fiducial markers into different regions of a dried skull and measured the distances. After computed tomography (CT) scanning, the accuracy was evaluated by determining the markers' position using frameless stereotaxy on a dry cadaver and indicated on the CT scan. We compared the accuracy of chairside fabricated oral splints to standard registration with bone markers immediately after fabrication and after a ten-time use. Accuracy was calculated as deviation (mean ± standard deviation). For statistical analysis, t test, Kruskal-Wallis, Tukey's, and various linear regression models, such as the Pearson's product-moment correlation coefficient, were used. RESULTS: Oral splints showed an accuracy of 0.90 mm ± 0.27 for viscerocranium, 1.10 mm ± 0.39 for skull base, and 1.45 mm ± 0.59 for neurocranium. We found an accuracy of less than 2 mm for both splints for a distance of up to 152 mm. The accuracy persisted even after ten times removing and reattaching the splints. CONCLUSIONS: Oral splints offer a non-invasive indicator to improve the accuracy of image-guided surgery. The precision is dependent on the distance to the target. Up to 150-mm distance, a precision of fewer than 2 mm is possible. Dental splints provide sufficient accuracy than bone markers and may opt for higher precision combined with other non-invasive registration methods.

Multifunctional Templates for Minimized Osteotomy, Implantation, and Palatal Distraction with a Mini-Screw-Assisted Expander in Schizodontism and Maxillary Deficit.

PURPOSE: Schizodontism is complete separation of a dental germ. It results in a twin tooth and supernumerary teeth. The treatment of transverse constriction in combination with supernumerary dental germs and impacted central incisors can pose a challenge, especially in young patients, when the number of permanent teeth is not adequate to ensure secure anchorage. The use of navigation templates based on three-dimensional X-ray images allows for precise insertion of temporary mini-implants for the acquisition of palatal distractors. In addition, templates allow for minimally invasive biopsies and osteotomies. METHODS: The treatment of schizodontism, dentitio tarda, and transverse constriction is to be assessed as an interdisciplinary method by using mini-screw-assisted devices. Minimized osteotomy of impacted supernumerary teeth or dental implantation can be carried out in a one-step-procedure based on digital preplanning and prefabrication of orthodontic devices. RESULTS: Multifunctional templates allow for early planning, preoperative fabrication, and intraoral fixation of orthodontic appliances. In the case of an adolescent patient, a sustainable, interdisciplinary treatment concept could be demonstrated that shows age-appropriate gnathological development and stable growth conditions over a follow-up period of 10 years. CONCLUSION: One can likely assume that multifunctional templates allow for minimally invasive one-step surgeries as an interdisciplinary tool between orofacial surgery and modern orthodontics.

Intraosseous anesthesia in symptomatic irreversible pulpitis: Impact of bone thickness on perception and duration of pain.

BACKGROUND: Intraosseous anesthesia (IO) allows the anesthetic solution to be injected directly into the cancellous bone. The anesthetic solution immediately reaches the periapical region, and thus the axonal area of the nerve, where it can temporarily disable the sodium pump. The effect is felt almost without any time delay, and only a small amount of anesthetic solution is required. METHODS: This study aims to investigate the efficacy of IO using the Anesto® device after infiltration anesthesia (IA) and/or inferior alveolar nerve block anesthesia (IANB) failed to work in symptomatic irreversible pulpitis (hot tooth). The 33 patients included in the study were treated additionally with 1.7 ml articaine hydrochloride with 1:100,000 epinephrine hydrochloride (Ultracain® D-S, Sanofi-Aventis, Frankfurt, Germany) IO. RESULTS: The electrical pulp test showed that 95.76% of the volunteers reacted positively to the combination of IANB or IA with the IO. In women, the additive IO was effective at 97.22%. In men, the IO led to pain elimination in 94.00% of cases. The duration of the IO was less than a quarter of an hour (13.03 min). The IO worked longer in women than in men (13.61 min vs. 12.33 min). Overall, more than every third tooth that needed trepanation was located in the posterior area of the mandible (36.4%). Treatment of hot teeth in this area was associated with an increased pulse rate and increased residual pain. There was a moderate correlation (Spearman-Rho [IRI] = 0.280) between the Visual Analog Scale (VAS) score and bone density, and a significant correlation (IRI = 0.612) between subjective residual pain and bone width. The IO resulted in a moderate, transient increase in the pulse rate by approximately 20 bpm. This is similar to the temporary increase in heart rate after conventional anesthesia techniques in non-preloaded patients and can be considered clinically irrelevant. CONCLUSION: IO with the Anesto® device as an extension and deepening of local pain elimination is recommended for the treatment of hot teeth.

Multidisciplinary oral rehabilitation of an adolescent suffering from juvenile Gorlin-Goltz syndrome - a case report.

BACKGROUND: The Gorlin-Goltz syndrome is an autosomal dominant disorder characterized by keratocystic odontogenic tumors in the jaws, multiple basal cell carcinomas and skeletal abnormities. Frequently, the manifestation of the syndrome occurs in the adolescent years. CASE PRESENTATION: An 11-year-old boy was referred to our clinic due to the persistence of the lower deciduous molars. The further diagnosis revealed bilateral keratocystic odontogenic tumors in the region of teeth 33 and 45 representing a symptom of a Gorlin-Goltz syndrome. This case of the oral rehabilitation of an adolescent with bilateral keratocystic odontogenic tumors shows the approach of a multidisciplinary treatment concept including the following elements: Enucleation and bone defect augmentation using a prefabricated bone graft; distraction osteogenesis to extend the graft-block vertically after cessation of growth; accompanying orthodontic treatment, guided implant placement and prosthetic rehabilitation. Six months after implant insertion, a new keratocystic odontogenic tumor in the basal part of the left sinus maxillaris had to be removed combined with the closure of the oroantral fistula. During the follow-up period of 18 months in semi-annual intervals, the patient showed no sign of pathology. CONCLUSION: In the presented case could be shown that distraction osteogenesis of prefabricated bone blocks is possible. With a multidisciplinary approach in a long-term treatment a sufficient oral rehabilitation of the patient suffering from extended keratocystic odontogenic tumors was possible.

Helicobacter pylori-mediated gastritis induces local downregulation of secretory leukocyte protease inhibitor in the antrum.

Helicobacter pylori-infected subjects exhibited a strong decline in antral secretory leukocyte protease inhibitor (SLPI) levels compared to H. pylori-negative subjects and subjects from whom H. pylori had been eradicated (P = 0.002). This reduction was specific for the antrum, whereas SLPI expression in corpus and duodenum was not affected. Antral SLPI levels were inversely correlated with inflammatory scores of antrum-predominant gastritis.

Genomewide linkage analysis identifies polymorphism in the human interferon-gamma receptor affecting Helicobacter pylori infection.

Helicobacter pylori is considered the most prevalent infectious agent among humans, and it causes gastric inflammation, gastroduodenal ulcers, and a risk of gastric cancer. We performed a genomewide linkage analysis among Senegalese siblings phenotyped for H. pylori-reactive serum immunoglobulin G. A multipoint LOD score of 3.1 was obtained at IFNGR1, the gene that encodes chain 1 of the interferon-gamma (IFN-gamma) receptor. Sequencing of IFNGR1 revealed -56C-->T, H318P, and L450P variants, which were found to be associated with high antibody concentrations. The inclusion of these in the linkage analysis raised the LOD score to 4.2. The variants were more prevalent in Africans than in whites. Our findings indicate that IFN-gamma signaling plays an essential role in human H. pylori infection, and they contribute to an explanation of the observations of high prevalences and relatively low pathogenicity of H. pylori in Africa. Moreover, they provide further support for the value of genomewide linkage studies in the analysis of susceptibility to infection and other complex genetic traits.