RESUMO
We describe the development of biohybrid electrodes constructed via combination of electrospun (e-spun) 3D indium tin oxide (ITO) with the trimeric supercomplex photosystem I and the small electrochemically active protein cytochrome c (cyt c). The developed 3D surface of ITO has been created by electrospinning of a mixture of polyelthylene oxide (PEO) and ITO nanoparticles onto ITO glass slides followed by a subsequent elimination of PEO by sintering the composite. Whereas the photosystem I alone shows only small photocurrents at these 3D electrodes, the co-immobilization of cyt c to the e-spun 3D ITO results in well-defined photoelectrochemical signals. The scaling of thickness of the 3D ITO layers by controlling the time (10 min and 60 min) of electrospinning results in enhancement of the photocurrent. Several performance parameters of the electrode have been analyzed for different illumination intensities.
Assuntos
Técnicas Biossensoriais/métodos , Eletrodos , Complexo de Proteína do Fotossistema I/química , Thermosynechococcus/metabolismoRESUMO
Electrodeposition is an important approach that can produce functional compound materials by assembling multiple species at the electrode surface. However, a fundamental understanding of the electrodeposition mechanism has been limited by its complexity and is often gained only through ex situ studies of deposited materials. Here we report on the application of scanning electrochemical microscopy (SECM) to enable the in situ, real-time, and quantitative study of electrodeposition and electrodissolution. Specifically, we electrodeposit magnetite (Fe3O4) from an alkaline solution of Fe(III)-triethanolamine as a robust route that can prepare this magnetic and electrocatalytic compound on various conductive substrates. The powerful combination of SECM with cyclic voltammetry (CV) at a gold substrate reveals that the electrodeposition of magnetite requires the preceding adsorption of Fe(II)-triethanolamine on the substrate surface and, subsequently, is mediated through the highly complicated ECadsCmag mechanism, where both chemical steps occur at the substrate surface rather than in the homogeneous solution. SECM-based CV is obtained under high mass-transport conditions and analyzed by the finite element method to kinetically resolve all steps of the ECadsCmag mechanism and quantitatively determine relevant reaction parameters. By contrast, the adsorbed Fe(II) intermediate is unresolvable from co-deposited magnetite in situ by other electrochemical techniques and is undetectable ex situ because of the facile air oxidation of the Fe(II) intermediate. Significantly, SECM-based CV will be useful for the in situ characterization of various electrodeposited compounds to complement their ex situ characterization.
RESUMO
We report the crucial components required to perform scanning electrochemical microscopy (SECM) with nanometer-scale resolution. The construction and modification of the software and hardware instrumentation for nanoscale SECM are explicitly explained including (1) the LabVIEW code that synchronizes the SECM tip movement with the electrochemical response, (2) the construction of an isothermal chamber to stabilize the nanometer scale gap between the tip and substrate, (3) the modification of a commercial bipotentiostat to avoid electrochemical tip damage during SECM experiments, and (4) the construction of an SECM stage to avoid artifacts in SECM images. These findings enabled us to successfully build a nanoscale SECM, which can be utilized to map the electrocatalytic activity of individual nanoparticles in a typical ensemble sample and study the structure/reactivity relationship of single nanostructures.
RESUMO
Carbon materials are tremendously important as electrode materials in both fundamental and applied electrochemistry. Recently, significant attention has been given not only to traditional carbon materials, but also to carbon nanomaterials for various electrochemical applications in energy conversion and storage as well as sensing. Importantly, many of these applications require fast electron-transfer (ET) reactions between a carbon surface and a redox-active molecule in solution. It, however, has not been well understood how heterogeneous ET kinetics at a carbon/solution interface is affected by the electronic structure, defect, and contamination of the carbon surface. Problematically, it is highly challenging to measure the intrinsic electrochemical reactivity of a carbon surface, which is readily passivated by adventitious organic contaminants. This Account summarizes our recent studies of carbon nanomaterials and graphite by scanning electrochemical microscopy (SECM) not only to reveal the fast ET kinetics of simple ferrocene derivatives at their graphitic surfaces, but also to obtain mechanistic insights into their extraordinary electrochemical reactivity. Specifically, we implemented new principles and technologies to reliably and reproducibly enable nanoscale SECM measurements. We took advantage of a new SECM imaging principle to resolve the high reactivity of the sidewall of individual single walled carbon nanotubes. In addition, we developed SECM-based nanogap voltammetry to find that monolayer graphene grown by chemical vapor deposition yields an unprecedentedly high standard ET rate constant, k(0), of ≥25 cm/s, which was >1000 times higher than that reported in the literature. Remarkably, the nonideal asymmetry of paired nanogap voltammograms revealed that the high reactivity of graphitic surfaces is compromised by their contamination with airborne hydrocarbons. Most recently, we protected the clean surface of highly oriented pyrolytic graphite from the airborne contaminants during its exfoliation and handling by forming a water adlayer to obtain a reliable k(0) value of ≥12 cm/s from symmetric pairs of nanogap voltammograms. We envision that SECM of clean graphitic surfaces will enable us to reliably address not only effects of their electronic structures on their electrochemical reactivity, but also the activity of carbon-based or carbon-supported electrocatalysts for fuel cells and batteries.
RESUMO
The intrinsic wettability of graphitic materials, such as graphene and graphite, can be readily obscured by airborne hydrocarbon within 5-20 min of ambient air exposure. We report a convenient method to effectively preserve a freshly prepared graphitic surface simply through a water treatment technique. This approach significantly inhibits the hydrocarbon adsorption rate by a factor of ca. 20×, thus maintaining the intrinsic wetting behavior for many hours upon air exposure. Follow-up characterization shows that a nanometer-thick ice-like water forms on the graphitic surface, which remains stabilized at room temperature for at least 2-3 h and thus significantly decreases the adsorption of airborne hydrocarbon on the graphitic surface. This method has potential implications in minimizing hydrocarbon contamination during manufacturing, characterization, processing, and storage of graphene/graphite-based devices. As an example, we show that a water-treated graphite electrode maintains a high level of electrochemical activity in air for up to 1 day.
RESUMO
High electrochemical reactivity is required for various energy and sensing applications of graphene grown by chemical vapor deposition (CVD). Herein, we report that heterogeneous electron transfer can be remarkably fast at CVD-grown graphene electrodes that are fabricated without using the conventional poly(methyl methacrylate) (PMMA) for graphene transfer from a growth substrate. We use nanogap voltammetry based on scanning electrochemical microscopy to obtain very high standard rate constants k(0) ≥25â cm s(-1) for ferrocenemethanol oxidation at polystyrene-supported graphene. The rate constants are at least 2-3â orders of magnitude higher than those at PMMA-transferred graphene, which demonstrates an anomalously weak dependence of electron-transfer rates on the potential. Slow kinetics at PMMA-transferred graphene is attributed to the presence of residual PMMA. This unprecedentedly high reactivity of PMMA-free CVD-grown graphene electrodes is fundamentally and practically important.
RESUMO
Highly oriented pyrolytic graphite (HOPG) is an important electrode material as a structural model of graphitic nanocarbons such as graphene and carbon nanotubes. Here, we apply scanning electrochemical microscopy (SECM) to demonstrate quantitatively that the electroactivity of the HOPG basal surface can be significantly lowered by the adsorption of adventitious organic impurities from both ultrapure water and ambient air. An SECM approach curve of (ferrocenylmethyl)trimethylammonium (FcTMA(+)) shows the higher electrochemical reactivity of the HOPG surface as the aqueous concentration of organic impurities, i.e., total organic carbon (TOC), is decreased from â¼20 to â¼1 ppb. SECM-based nanogap voltammetry in â¼1 ppb-TOC water yields unprecedentedly high standard electron-transfer rate constants, k(0), of ≥17 and ≥13 cm/s for the oxidation and reduction of the FcTMA(2+/+) couple, respectively, at the respective tip-HOPG distances of 36 and 45 nm. Anomalously, k(0) values and nanogap widths are different between the oxidation and reduction of the same redox couple at the same tip position, which is ascribed to the presence of an airborne contaminant layer on the HOPG surface in the noncontaminating water. This hydrophobic layer is more permeable to FcTMA(+) with less charge than its oxidized form so that the oxidation of FcTMA(+) at the HOPG surface results in the higher tip current and, subsequently, apparently narrower gap and higher k(0). Mechanistically, we propose that HOPG adsorbs organic impurities mainly from ambient air and then additionally from â¼20 ppb-TOC water. The latter tightens a monolayer of airborne contaminants to yield lower permeability.
RESUMO
Glass-sealed Pt electrodes with submicrometer and nanometer size have been successfully developed and applied for nanoscale electrochemical measurements such as scanning electrochemical microscopy (SECM). These small electrodes, however, are difficult to work with because they often lose a current response or give a low SECM feedback in current-distance curves. Here we report that these problems can be due to the nanometer-scale damage that is readily and unknowingly made to the small tips in air by electrostatic discharge or in electrolyte solution by electrochemical etching. The damaged Pt electrodes are recessed and contaminated with removed electrode materials to lower their current responses. The recession and contamination of damaged Pt electrodes are demonstrated by scanning electron microscopy and X-ray energy dispersive spectroscopy. The recessed geometry is noticeable also by SECM but is not obvious from a cyclic voltammogram. Characterization of a damaged Pt electrode with recessed geometry only by cyclic voltammetry may underestimate electrode size from a lower limiting current owing to an invalid assumption of inlaid disk geometry. Significantly, electrostatic damage can be avoided by grounding a Pt electrode and nearby objects, most importantly, an operator as a source of electrostatic charge. Electrochemical damage can be avoided by maintaining potentiostatic control of a Pt electrode without internally disconnecting the electrode from a potentiostat between voltammetric measurements. Damage-free Pt electrodes with submicrometer and nanometer sizes are pivotal for reliable and quantitative nanoelectrochemical measurements.
Assuntos
Vidro/química , Nanotecnologia/métodos , Platina/química , Técnicas Eletroquímicas/métodos , EletrodosRESUMO
The nuclear pore complex (NPC) is the proteinaceous nanopore that solely mediates molecular transport across the nuclear envelope between the nucleus and cytoplasm of a eukaryotic cell. Small molecules (<40 kDa) diffuse through the large pore of this multiprotein complex. A passively impermeable macromolecule tagged with a signal peptide is chaperoned through the nanopore by nuclear transport receptors (e.g., importins) owing to their interactions with barrier-forming proteins. Presently, this bimodal transport mechanism is not well understood and is described by controversial models. Herein, we report on a dynamic and spatially resolved mechanism for NPC-mediated molecular transport through nanoscale central and peripheral routes with distinct permeabilities. Specifically, we develop a nanogap-based approach of scanning electrochemical microscopy to precisely measure the extremely high permeability of the nuclear envelope to a small probe molecule, (ferrocenylmethyl)trimethylammonium. Effective medium theories indicate that the passive permeability of 5.9 × 10(-2) cm/s corresponds to the free diffusion of the probe molecule through ~22 nanopores with a radius of 24 nm and a length of 35 nm. Peripheral routes are blocked by wheat germ agglutinin to yield 2-fold lower permeability for 17 nm-radius central routes. This lectin is also used in fluorescence assays to find that importins facilitate the transport of signal-tagged albumin mainly through the 7 nm-thick peripheral route rather than through the sufficiently large central route. We propose that this spatial selectivity is regulated by the conformational changes in barrier-forming proteins that transiently and locally expand the impermeably thin peripheral route while blocking the central route.
Assuntos
Nanoestruturas/química , Poro Nuclear/química , Peptídeos/química , Carioferinas/química , Carioferinas/metabolismo , Microscopia Eletrônica de Varredura , Poro Nuclear/metabolismo , Peptídeos/metabolismoRESUMO
The control of a nanometer-wide gap between tip and substrate is critical for nanoscale applications of scanning electrochemical microscopy (SECM). Here, we demonstrate that the stability of the nanogap in ambient conditions is significantly compromised by the thermal expansion and contraction of components of an SECM stage upon a temperature change and can be dramatically improved by suppressing the thermal drift in a newly developed isothermal chamber. Air temperature in the chamber changes only at ~.2 mK/min to remarkably and reproducibly slow down the drift of tip-substrate distance to ~0.4 nm/min in contrast to 5-150 nm/min without the chamber. Eventually, the stability of the nanogap in the chamber is limited by its fluctuation with a standard deviation of ±0.9 nm, which is mainly ascribed to the instability of a piezoelectric positioner. The subnanometer scale drift and fluctuation are measured by forming a ~20 nm-wide gap under the 12 nm-radius nanopipet tip based on ion transfer at the liquid/liquid interface. The isothermal chamber is useful for SECM and, potentially, for other scanning probe microscopes, where thermal-drift errors in vertical and lateral probe positioning are unavoidable by the feedback-control of the probe-substrate distance.
Assuntos
Microscopia Eletrônica de Varredura/instrumentação , Temperatura , Eletroquímica , NanotecnologiaRESUMO
Here we report on a generalized theory for scanning electrochemical microscopy to enable the voltammetric investigation of a heterogeneous electron-transfer (ET) reaction with arbitrary reversibility and mechanism at the macroscopic substrate. In this theory, we consider comprehensive nanoscale experimental conditions where a tip is positioned at a nanometer distance from a substrate to detect the reactant or product of a substrate reaction at any potential in the feedback or substrate generation/tip collection mode, respectively. Finite element simulation with the Marcus-Hush-Chidsey formalism predicts that a substrate reaction under the nanoscale mass transport conditions can deviate from classical Butler-Volmer behavior to enable the precise determination of the standard ET rate constant and reorganization energy for a redox couple from the resulting tip current-substrate potential voltammogram as obtained at quasi-steady state. Simulated voltammograms are generalized in the form of analytical equations to allow for reliable kinetic analysis without the prior knowledge of the rate law. Our theory also predicts that a limiting tip current can be controlled kinetically to be smaller than the diffusion-limited current when a relatively inert electrode material is investigated under the nanoscale voltammetric conditions.
RESUMO
We report on a novel theory and experiment for scanning electrochemical microscopy (SECM) to enable quasi-steady-state voltammetry of rapid electron transfer (ET) reactions at macroscopic substrates. With this powerful approach, the substrate potential is cycled widely across the formal potential of a redox couple while the reactant or product of a substrate reaction is amperometrically detected at the tip in the feedback or substrate generation/tip collection mode, respectively. The plot of tip current versus substrate potential features the retraceable sigmoidal shape of a quasi-steady-state voltammogram although a transient voltammogram is obtained at the macroscopic substrate. Finite element simulations reveal that a short tip-substrate distance and a reversible substrate reaction (except under the tip) are required for quasi-steady-state voltammetry. Advantageously, a pair of quasi-steady-state voltammograms is obtained by employing both operation modes to reliably determine all transport, thermodynamic, and kinetic parameters as confirmed experimentally for rapid ET reactions of ferrocenemethanol and 7,7,8,8-tetracyanoquinodimethane at a Pt substrate with â¼0.5 µm-radius Pt tips positioned at 90 nm-1 µm distances. Standard ET rate constants of â¼7 cm/s were obtained for the latter mediator as the largest determined for a substrate reaction by SECM. Various potential applications of quasi-steady-state voltammetry are also proposed.