Effect of Position of Donor Units and Alkyl Groups on Dye-Sensitized Solar Cell Device Performance: Indoline-Aniline Donor-Based Visible Light Active Unsymmetrical Squaraine Dyes.

Indoline (In) and aniline (An) donor-based visible light active unsymmetrical squaraine (SQ) dyes were synthesized for dye-sensitized solar cells (DSSCs), where the position of An and In units was changed with respect to the anchoring group (carboxylic acid) to have In-SQ-An-CO2H and An-SQ-In-CO2H sensitizers, AS1-AS5. Linear or branched alkyl groups were functionalized with the N atom of either In or An units to control the aggregation of the dyes on TiO2. AS1-AS5 exhibit an isomeric π-framework where the squaric acid unit is placed in the middle, where AS2 and AS5 dyes possess the anchoring group connected with the An donor, and AS1, AS3, and AS4 dyes having the anchoring group connected with the In donor. Hence, the conjugation between the middle squaric acid acceptor unit and the anchoring -CO2H group is short for AS2, AS5, and AK2 and longer for AS1, AS3, and AS4 dyes. AS dyes showed absorption between 501 and 535 nm with extinction coefficients of 1.46-1.61 × 105 M-1 cm-1. Further, the isomeric π-framework of An-SQ-In-CO2H and In-SQ-An-CO2H exhibited by means of changing the position of In and An units a bathochromic shift in the absorption properties of AS2 and AS5 compared to the AS1, AS3, and AS4 dyes. The DSSC device fabricated with the dyes contains short acceptor-anchoring group distance (AS2 and AS5) showed high photovoltaic performances compared to the dyes having longer distance (AS1, AS3, and AS4) with the iodolyte (I-/I3-) electrolyte. DSSC device efficiencies of 5.49, 6.34, 6.16, and 5.57% have been achieved for AS1, AS2, AS3, and AS4 dyes, respectively; without chenodeoxycholic acid (CDCA), small changes have been observed in the device performance of the AS dyes with CDCA. Significant changes have been noted in the DSSC parameters (open-circuit voltage VOC, short-circuit current JSC, fill factor ff, and efficiency η) for the AS5 dye while sensitized with CDCA and showed highest DSSC efficiency of 8.01% in the AS dye series. This study revealed the potential of shorter SQ acceptor-anchoring group distance over the longer one and the importance of alkyl groups on the overall DSSC device performance for the unsymmetrical squaraine dyes.

Visible-Light-Active Unsymmetrical Squaraine Dyes with Pyridyl Anchoring Groups for Dye-Sensitized Solar Cells.

Visible-light-active alkyl group-wrapped unsymmetrical squaraine dyes SD1-SD3 were synthesized, featuring an indoline donor and pyridine and carboxylic acid anchoring groups. Their photophysical, electrochemical, and photovoltaic characteristics were examined by fabricating a dye-sensitized solar cell (DSSC) device. Both carboxylic acid and pyridine anchoring groups containing squaraine dyes SD3 and SD2 possess similar photophysical and electrochemical characteristics. However, their photovoltaic performances were completely different. The SD3 dye with the carboxylic acid anchoring group displayed a DSSC device efficiency of 7.20% (VOC 0.81 V; JSC 12.29 mA/cm2) using iodolyte (I-/I3-) electrolyte, compared to SD1 (VOC 0.659 V; JSC 4.97 mA/cm2; and η - 2.34%) and SD2 (VOC 0.629 V; JSC 1.68 mA/cm2; and η - 0.84%), which were featured with pyridyl anchoring groups. These results were attributed to dye loading on the Lewis and Brønsted acidic sites of TiO2 and the importance of aggregated structures for photocurrent generation. In the incident photon-to-current efficiency (IPCE) analysis, SD1 dye-sensitized devices exhibited photocurrent generation from both monomeric and aggregated dyes on the TiO2 surface. In contrast, SD2 showed photocurrent generation solely from aggregated states. Despite the introduction of long alkyl chains to reduce dye aggregation and charge recombination, the results indicated preferential charge injection from only the aggregated SD2 dye on TiO2. Fluorescence-quenching experiments indicated an efficient charge transfer from the aggregated SD2 dye to TiO2 compared to that of the monomeric dye. Cosensitization, a method to enhance the light-harvesting efficiency and photocurrent generation in DSSCs, was explored by simultaneously cosensitizing pyridyl-based dyes (SD1 and SD2) with a blue-colored carboxylic acid-based squaraine dye SD4. IPCE analysis demonstrated that both SD1 and SD4 contributed to generating a photocurrent of 9.11 mA/cm2. The sequential cosensitization of SD1 and SD4 with the coadsorbent CDCA showed the highest performance, with a VOC of 0.663 V, a JSC of 11.43 mA/cm2, and an efficiency (η) of 5.20%.

D-A-D-based Unsymmetrical Thiosquaraine Dye for the Dye-Sensitized Solar Cells†.

In dye-sensitized solar cell, modulating the electronic properties of the sensitizer by varying the donor, π-spacer, acceptor and anchoring groups help optimizing the structure of the dye for better device performance. Here, a donor-acceptor-donor-based unsymmetrical thiosquaraine sensitizer (SQ5S) has been designed and synthesized. Photophysical, electrochemical, theoretical and photovoltaic characterizations of SQ5S dye have been compared with its oxygen analog, SQ5. The incorporation of the sulfur atom in the acceptor unit of SQ5S dye showed an intense peak at 688 nm, which was 38 nm of red-shifted and showed the panchromatic light harvesting response with the onset of 850 nm compared with SQ5 dye. The LUMO and HOMO energy levels are well aligned with the conduction band of TiO2 and the redox potential of electrolyte for the charge injection and the dye-regeneration processes, respectively. Photovoltaic efficiency of 1.51% (VOC 610 mV, JSC 3.07 mA cm-2 , ff 81%) has been achieved for SQ5S dye, whereas SQ5 showed the device performance of 5.43% (VOC 723 mV, JSC 9.3 mA cm-2 , ff 80%). The decreased device performance for the dye SQ5S has been attributed to the favorable intersystem crossing process associated with the photoexcited SQ5S that reduces the driving force for the charge injection process.

Solvent-Dependent Functional Aggregates of Unsymmetrical Squaraine Dyes on TiO2 Surface for Dye-Sensitized Solar Cells.

Alkyl group wrapped donor-acceptor-donor (D-A-D) based unsymmetrical squaraine dyes SQ1, SQ5, and SQS4 were used to evaluate the effect of sensitizing solvents on dye-sensitized solar cell (DSSC) efficiency. A drastic change in DSSC efficiency was observed when the photo-anodes were sensitized in acetonitrile (bad solvent when considering dye solubility) and chloroform (good solvent) with an Iodolyte (I-/I3-) electrolyte. The DSSC device sensitized with squaraine dyes in acetonitrile showed better photovoltaic performance with enhanced photocurrent generation and photovoltage compared to the device sensitized in chloroform. In a good sensitizing solvent, dyes with long hydrophobic alkyl chains are deleterious forming aggregates on the TiO2 surface, which results in an incident photon-to-current conversion efficiency (IPCE) response mostly from monomeric and dimeric structures. Meanwhile, a bad sensitizing solvent facilitates the formation of well-packed self-assembled structures on the TiO2 surface, which are responsible for a broad IPCE response and high device efficiencies. The photoanode sensitized in the bad sensitizing solvent showed enhanced VOC values of 642, 675, and 699 mV; JSC values of 6.38, 11.1, and 11.69 mA/cm2; and DSSC device efficiencies of 3.0, 5.63, and 6.13% for the SQ1, SQ5, and SQS4 dyes in the absence of a coadsorbent (chenodeoxycholic acid (CDCA)), respectively, which were further enhanced by CDCA addition. Meanwhile, the photoanode sensitized in the good sensitizing solvent showed relatively low photovoltaic VOC values of 640, 652, and 650 mV; JSC values of 5.78, 6.79, and 6.24 mA/cm2; and device efficiencies of 2.73, 3.35, and 3.20% for SQ1, SQ5, and SQS4 in the absence of CDCA, respectively, which were further varied with equivalents of CDCA. The best DSSC device efficiencies of 6.13 and 3.20% were obtained for SQS4 without CDCA, where the dye was sensitized in acetonitrile (bad) and chloroform (good) sensitizing solvents, respectively.

Alkyl-Group-Wrapped Unsymmetrical Squaraine Dyes for Dye-Sensitized Solar Cells: Branched Alkyl Chains Modulate the Aggregation of Dyes and Charge Recombination Processes.

Electron transfer processes at the interfaces dictate the factors that improve the photovoltaic parameters, such as open-circuit voltage (Voc) and short-circuit current (Jsc), of a dye-sensitized solar cell device, besides selection of a set of suitable anode, dye, electrolyte, and cathode materials. An inefficient charge injection process at the dye-TiO2 interface and charge recombination at the TiO2-dye/electrolyte interface have detrimental effects on improving both Jsc and Voc. Hence, tailoring the factors that govern the improvement of Jsc and Voc will be an ideal approach to get the desired sensitizers with good device efficiencies. Squaraines are far-red-active zwitterionic dyes and have a high molar extinction coefficient along with unique aggregation properties due to the large dipole moment associated with them. Here, we report a series of unsymmetrical squaraine dyes, SQS1 to SQS6, with systematic variation of alkyl groups at the sp3-C and N-atoms of the indoline unit that is away from the anchoring group to control the dye-dye interactions on the TiO2 surface. The branched alkyl groups help in modulating the self-assembly of sensitizers on the TiO2 surface, besides passivating the surface that helps avoid the charge recombination processes. Light harvesting efficiency and cyclic voltammetry studies of dye-sensitized TiO2 electrodes indicate that the aggregation and charge hopping process between the dye molecules can be modulated, respectively, by systematically increasing the number of carbon atoms in the alkyl groups. Such a variation in the branched alkyl group helps enhance Voc from 672 (SQS1) to 718 mV (SQS6) and Jsc from 7.95 (SQS1) to 12.22 mA/cm2 (SQS6), with the device efficiency ranging from 3.82% to 6.23% without any coadsorbent. Dye SQS4 achieves the highest efficiency of 7.1% (Voc = 715 mV, Jsc = 13.05 mA/cm2) with coadsorbent chenodeoxycholic acid (CDCA) using an iodine (I-/I3-) electrolyte compared to its analogues. An analysis of the incident photon-to-current efficiency profiles indicates that the major contribution to photocurrent generation is from the aggregated squaraine dyes on TiO2.

Light-Triggered, Spatially Localized Chemistry by Photoinduced Electron Transfer.

It is of immense interest to exert spatial and temporal control of chemical reactions. It is now demonstrated that irradiation can trigger reactions specifically at the surface of a simple colloidal construct, obtained by adsorbing polyethyleneimine on fluorescent colloidal particles. Exciting the fluorescent dye in the colloid affords photoinduced electron transfer to spatially proximal amine groups on the adsorbed polymer to form free radical ions. It is demonstrated that these can be harnessed to polymerize acrylic acid monomer at the particle surface, or to break up colloidal assemblies by cleaving a cross-linked polymer mesh. Formation of free radical ions is not a function of the size of the colloid, neither is it restricted to a specific fluorophore. Fluorophores with redox potentials that allow photoinduced electron transfer with amine groups show formation of free radical ions.

Indenoquinaldine-Based Unsymmetrical Squaraine Dyes for Near-Infrared Absorption: Investigating the Steric and Electronic Effects in Dye-Sensitized Solar Cells.

A series of near-infrared (NIR)-responsive unsymmetrical squaraine dyes (ISQ1-3) incorporating a fused indenoquinaldine-based donor have been designed and synthesized. C12 alkyl chains were incorporated at the sp3 -hybridized carbon center of the indene unit of the indenoquinaldine in an out-of-plane orientation to control dye aggregation on the surface of titanium dioxide, and indole (ISQ1), benzo[e]indole (ISQ2), and quinoline (ISQ3) moieties were included as the donor component bearing the anchoring carboxy group to extend the absorption in the NIR region and to systematically study the effect of the electronic modification on the performance of dye-sensitized solar cells (DSSC). All the dyes exhibit intense absorption (ϵ≥105 m-1 cm-1 ) in the NIR region, and the dye-adsorbed TiO2 films exhibit broad panchromatic absorption. The incident photon-to-current efficiency (IPCE) spectrum of the ISQ3-based DSSC device displays a panchromatic IPCE response up to 880 nm. Additionally, the ISQ3-sensitized device provides the best efficiency of 4.15 % with a short circuit current density (JSC ) of 10.02 mA cm-2 , open-circuit voltage (VOC ) of 0.58 V, and fill factor (ff) of 72 % in the presence of 10 equivalents of 3α,7α-dihydroxy-5ß-cholanic acid (CDCA). Electrochemical impedance spectroscopy analysis showed attenuated charge recombination in the ISQ3-sensitized DSSC, which contributes to its higher value of VOC compared with the other dyes.

Fused Fluorenylindolenine-Donor-Based Unsymmetrical Squaraine Dyes for Dye-Sensitized Solar Cells.

A series of four unsymmetrical squaraine dyes, XSQ1-4, were synthesized using a fused fluorenylindolenine-based donor unit for dye-sensitized solar cells (DSSCs). The fused structure of fluorenylindolenine helped in moving the absorption toward the near-infrared (NIR) region, and the two sp3-C centers available on this donor were utilized to incorporate out-of-plane alkyl chains in opposite directions to control the dye-dye interactions on the TiO2 surface. High extinction coefficient (ε ≥ 105 M-1 cm-1) for absorbing NIR photons and suitable highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels with respect to the conduction band of TiO2 and electrolyte for charge injection and dye regeneration processes, respectively, make these dyes potential sensitizers for DSSCs. Introduction of branched alkyl groups in the π-framework helped in controlling dye aggregation to reduce exciton quenching and assisted in TiO2 surface passivation to avoid the charge recombination process. Furthermore, having a naphthyl group on the indole part of the anchoring group containing segment helped to red-shift the absorption spectrum of dyes 15 nm toward the NIR region (XSQ3-4). Among all of the dyes under investigation, XSQ2 gave the best photovoltaic performance, having a short-circuit current density ( JSC) of 13.99 mA cm-2, open-circuit voltage ( VOC) of 0.66 V, and a fill factor (ff) of 0.71, with a device performance (η) of 6.57%. Electrochemical impedance spectroscopy revealed higher electron lifetime on TiO2 for XSQ2, which helps to avoid the charge recombination process.

Modulated photochemical reactivities of O-acetylated (3',5'-dimethoxyphenyl)heteroaryl acyloin derivatives under direct irradiation and photo-induced electron transfer conditions.

3',5'-Dimethoxybenzoin esters are important photoremovable protecting groups which form 2-phenylbenzofuran derivatives upon photo-release. We utilized a similar concept to test a photochemical method of installing a benzofuran moiety to the conjugated backbone by subjecting O-acetylated (3',5'-dimethylphenyl)heteroaryl acyloin derivatives through direct photo irradiation and a photo-induced electron transfer reaction. These photochemical methods were explored for a variety of heteroaromatic substrates appended on the ketone part of the O-acetylated cross-acyloin derivatives. The furan, thiophene and bithiophene derivatives led to the expected cyclized (benzofuran capped) products but the derivatives with extended conjugation decomposed under direct irradiation. However, under irradiation in the presence of an electron donor such as triethylamine, the extended acyloin derivatives afforded both cyclized and deacetoxylated products. The semiconducting nature of the extended cyclized products was also explored and tested for solution-processed organic field effect transistors, providing a maximum hole mobility of 1.3 × 10-6 cm2 V-1 s-1.

Self-Assembly of Cis-Configured Squaraine Dyes at the TiO2-Dye Interface: Far-Red Active Dyes for Dye-Sensitized Solar Cells.

To synergize both steric and electronic factors in designing the dyes for dye-sensitized solar cells, a series of cis-configured unsymmetrical squaraine dyes P11-P15 with suitably functionalized alkyl groups and squaric acid units containing the electron-withdrawing groups were synthesized, respectively. These dyes capture the importance of (i) the effect and position of branched alkyl groups, (ii) mono- and di-anchoring groups containing dyes, and (iii) further appending the alkyl groups through the cyanoester vinyl unit on the central squaric acid units of D-A-D-based cis-configured squaraine dyes. All the above factors govern the controlled self-assembly of the dyes on the TiO2 surface which helps to broaden the absorption profile of the dyes with an increased energy-harvesting process. With respect to the position of the branched alkyl groups, dye P11 with the sp3-C and N-alkyl groups away from the TiO2 surface showed a better device efficiency of 5.98% ( Jsc of 14.46 mA cm-2, Voc of 0.576 V, and ff of 71.8%) than its positional isomer P12 with 3.45% ( Jsc of 8.78 mA cm-2, Voc of 0.554 V, and ff of 70.9%). However, with respect to the dyes containing mono- and di-anchoring groups, P13 with two anchoring units exhibited a superior device performance of 7.58% ( Jsc of 17.12 mA cm-2, Voc of 0.618 V, and ff of 71.7%) in the presence of optically transparent co-adsorbent CDCA (3α,7α-dihydroxy-5ß-cholanic acid) than dyes P11 and P12.

Homo- and Heterodimeric Dyes for Dye-Sensitized Solar Cells: Panchromatic Light Absorption and Modulated Open Circuit Potential.

The design of dyes for panchromatic light absorption has attracted much attention in the field of dye-sensitized solar cells (DSSCs). An approach to enhance panchromatic light absorption utilizes mixtures of complementary light-absorbing dyes as well as dyes with specific anchoring groups that facilitate interfacial charge transfer with TiO2 . Dipole-dipole interactions between the dye molecules on the surface broaden the spectrum, which results in decreased DSSC device performance. However, controlled aggregation of dyes results in broadening the spectral profile along with enhanced photocurrent generation. To control the dye-dye interaction, dimeric dyes with different dipole lengths D1 -Dsq , Dsq -Dsq were systematically designed and synthesized. The photophysical and electrochemical properties were evaluated and the EHOMO and ELUMO levels were determined; these energy levels determines the electron injection from ELUMO of the dye to ECB of TiO2 and regeneration of oxidized dye by the electrolyte, respectively. The absorption spectra of Dsq -Dsq , D1 -Dsq were broadened in solution compared to model dye Dsq ; this indicates that the dye-dye interaction is prominent in solution. In D1 -Dsq excitation energy transfer between photoexcited D1 and Dsq was explained by using Förster resonance energy transfer (FRET). The homodimeric dye showed a device performace of 2.8 % (Voc 0.607, Jsc 6.62 mA/cm2 , ff 69.3 %),whereas the heterodimeric dye D1 -Dsq showed a device performance of 3.9 % (Voc 0.652 V, Jsc 8.89 mA/cm2 , ff 68.8 %). The increased photocurrent for D1 -Dsq is due to the panchromatic IPCE response compared to Dsq -Dsq . The increased Voc is due to the effective passivation of the TiO2 surface by the spirolinker, and the effective dipole moment that shifts the conduction band on TiO2 . Hence, the open circuit potential, Voc , for the devices prepared from Dsq , D1 -Dsq and Dsq -Dsq were systematically modulated by controlling the intermolecular π-π and intramolecular dipole-dipole interactions of the dimeric dyes.

Interplay between π-Bridges and Positions of Branched Alkyl Groups of Unsymmetrical D-A-D-π-A Squaraines in Dye-Sensitized Solar Cells: Mode of Dye Anchoring and the Charge Transfer Process at the TiO2/Dye/Electrolyte Interface.

Far-red-absorbing squaraines possessing high molar absorptivity (>105 M-1 cm-1) are being attracted as high-efficiency chromophores in dye-sensitized solar cells (DSSCs). A series of donor-acceptor-donor-π spacer-acceptor (D-A-D-π-A) unsymmetrical squaraines, PSQ1-5, with indoline donor and squaric/cyanoacetic acid acceptor units, were designed for sensitized solar cells. For extending the absorption toward the near-infrared region (NIR) and controlling the orientation on the TiO2 surface, benzene (PSQ1 and PSQ2) and thiophene (PSQ3-5) π-spacers and out-of-plane branched alkyl groups at the indoline that are away (PSQ1, PSQ3, and PSQ5) or near (PSQ2 and PSQ4) the anchoring group, respectively, were introduced. Dynamic aggregation tendency of PSQ1 and PSQ3 than that of their isomers systematically modulates the orientation on the TiO2 surface, which in turn enhances photovoltaic performance. Absorptance on a thin transparent TiO2 film shows a visible-to-NIR response with an onset around 800 nm for PSQ3-5. Although there is close resemblance in electrochemical redox levels, their high injection efficiency and recombination resistance differentiated their impact on the way of anchoring and the dihedral angle between D-A-D units and π-spacers. DSSCs sensitized with PSQ5 achieved a PCE of 8.15% under simulated AM 1.5G illumination (100 mW cm-2), with the current density (Jsc) and open-circuit voltage (Voc) of 19.73 mA cm-2 and 630 mV, respectively. A clear comparison of the incident-photon-to-current conversion efficiency versus the light-harvesting efficiency correlates the structure-property relationship with Jsc obtained for PSQ dyes. Electrochemical impedance spectroscopy was carried out to examine the TiO2/dye/electrolyte interface for further confirmation of the enhanced PCE of top-sp3-alkylated PSQ5 over that of other dyes.

Orthogonally Functionalized Donor/Acceptor Homo- and Heterodimeric Dyes for Dye-Sensitized Solar Cells: An Approach to Introduce Panchromaticity and Control the Charge Recombination.

Organic dyes possessing conjugated π-framework forms closely packed monolayers on photoanode in dye-sensitized solar cell (DSSC), because of the limitation to control the orientation and the extend of intermolecular π-π interaction, self-aggregation of dyes leads to reduced cell performance. In this report, a series of homodimeric (D1-D1 and D2-D2) and heterodimeric (D1-D2 and D2-D4) donor/acceptor (D/A) dyes containing spiroBiProDOT π-spacer were designed and synthesized by utilizing Pd-catalyzed direct arylation reaction and correlates the device performance with monomeric dyes (D1 and D2). Both the thiophenes (π-spacer) of spiroBiProDOT were functionalized with same or different donor groups which led to homodimeric and heterodimeric chromophores in a single sensitizer. The homodimeric spiro-dye D1-D1 showed higher power conversion efficiency (PCE), of 7.6% with a Voc and Jsc of 0.672 V and 16.16 mA/cm2, respectively. On the other hand, the monomeric D1 exhibited a PCE of 3.2% (Voc of 0.64 V and Jsc of 7.2 mA/cm2), which is lower by 2.4 fold compared to dimeric analogue. The spiro-unit provides flexibility between the incorporated chromophores to orient on TiO2 due to four sp3-centers, which arrest the molecular motions after chemisorption. This study shows a new molecular approach to incorporate two chromophores in the dimeric dye possessing complementary absorption characteristics toward panchromatic absorption. The attenuated charge recombination at TiO2/Dye/redox couple interface in case of D1-D1, owing to better passivation of TiO2 surface, was elucidated through impedance analysis. The FT-IR spectrum of D1-D1 adsorbed on TiO2 film indicated both the carboxylic units were involved in chemisorption which makes strong coupling between dye and TiO2.

Panchromatic Sensitizer for Dye-Sensitized Solar Cells: Unsymmetrical Squaraine Dyes Incorporating Benzodithiophene π-Spacer with Alkyl Chains to Extend Conjugation, Control the Dye Assembly on TiO2, and Retard Charge Recombination.

Metal-free near-infrared (NIR) active unsymmetrical squaraine dyes, RSQ1 and RSQ2, with benzodithiophene (BDT) π-spacer and cyanoacrylic acid acceptor were synthesized by utilizing palladium catalyzed direct (hetero)arylation reaction. Methyl and 2-ethylhexyl groups were strategically placed at the BDT unit for RSQ1 and RSQ2, respectively, to investigate the effect of alkylated π-spacer on dye aggregation on the TiO2 surface and recombination reactions at TiO2/dye/electrolyte interface. These dyes have strong absorption (ε > 105 M-1 cm-1) in near-infrared (NIR) region and exhibit similar optical and electrochemical properties as they have same conjugated framework. RSQ2 performed better than RSQ1 owing to its higher open-circuit voltage (Voc) and fill factor (ff) in spite of having comparable short-circuit current density (Jsc). The panchromatic incident photon-to-current conversion efficiency (IPCE) response was also observed for both the dyes. RSQ2 showed power conversion efficiency (PCE) of 6.72% with short-circuit current density (Jsc) of 18.53 mA/cm2, open circuit voltage (Voc) of 0.538 V, and fill factor (ff) of 67.4%, without any coadsorbent. Attenuation of the charge recombination for RSQ2 was revealed by electrochemical impedance analysis (EIS) and open-circuit potential decay transients (OCVD), which attributes to its higher Voc and ff in comparison to RSQ1.

Effect of Out-of-Plane Alkyl Group's Position in Dye-Sensitized Solar Cell Efficiency: A Structure-Property Relationship Utilizing Indoline-Based Unsymmetrical Squaraine Dyes.

Squaraine dyes are promising chromophores to harvest visible and near-infrared (NIR) photons. A series of indoline-based unsymmetrical squaraine (SQ) dyes that contain alkyl chains at sp3 C- and N- atoms of indoline moieties with a carboxylic acid anchoring group were synthesized. The optical and electrochemical properties of the SQ dyes in solution were nearly identical as there was no change in the D-A-D SQ framework; however, remarkable changes with respect to the power conversion efficiencies (PCE) were observed depending upon the position of alkyl groups in the dye. Introduction of alkyl groups to the indoline unit that was away from anchoring unit were helped in more dye loading with controlled organization of dyes on surface, increased charge transfer resistance, long electron lifetime, and hence higher PCE than that of the corresponding isomer in which the alkyl groups funtionalized indoline unit contains the carboxylic acid anchoring group. Careful analysis of incident photon-to-current conversion efficiency (IPCE) profiles indicated the presence of aggregated structure on the TiO2 surface that contributes to the charge injection in the presence of a coadsorbent. A dye-sensitized solar cell (DSSC) device made out of SQ5 was achieved an efficiency of 9.0%, with an open-circuit potential (Voc) of 660 mV and short-circuit current density (Jsc) of 19.82 mA/cm2, under simulated AM 1.5G illumination (100 mW/cm2). The IPCE profile of SQ5 shows an onset near to 750 nm with a good quantum efficiency (>80%) in the range of 550-700 nm, indicating the importance of self-organization of dyes on the TiO2 surface for an efficient charge injection. This present investigation revealed the importance of position of alkyl groups in the squaraine-based dyes for the better PCE.

Dendrimers as photochemical reaction media. Photochemical behavior of unimolecular and bimolecular reactions in water-soluble dendrimers.

Synthesis and studies of poly(alkyl aryl ether) dendrimers, possessing carboxylic acid functionalities at their peripheries, are reported. 5-Bromopentyloxy methylisophthalate was utilized as the monomer to O-alkylate the phenolic hydroxyl groups of poly(alkyl aryl ether) dendrimers. Dendrimers of first, second, and third generations, possessing 6, 12, and 24 carboxylic acids, respectively, were thus prepared. These dendrimers were soluble in alkaline aqueous solutions, and the ensuing microenvironmental properties of the aqueous solutions were assessed by pyrene solubilization studies. Upon establishing the presence of nonpolar microenvironments within the dendritic structures, solubilizations of few organic substrates were conducted and their photochemical behaviors were assessed. Specifically, the photolysis of 1-phenyl-3-p-tolyl-propan-2-one and benzoin ethyl ether and photodimerization of acenaphthylene were conducted. These studies revealed that the product distribution and the "cage effect" were more distinct and efficient for the third generation dendrimer, than for the first and second generation dendrimers. The photochemical studies of carboxylic acid functionalized dendrimers were compared to that of hydroxyl group terminated poly(alkyl aryl ether) dendrimers.

Water-soluble dendrimers as photochemical reaction media: chemical behavior of singlet and triplet radical pairs inside dendritic reaction cavities.

Water-soluble poly(alkyl aryl ether) dendrimers have been explored for their use as hosts of organic substrates in aqueous media. Prototypical photoreactions, namely, photo-Fries reaction of (a) 1-naphthyl benzoate and (b) 1-naphthyl phenyl ester and alpha-cleavage reaction of (a) dibenzyl ketones and (b) benzoin alkyl ethers, have been examined. We find that a dendritic microenvironment not only restricts the mobility of radical intermediates but also rigidly encapsulates the substrate, intermediates, and products from "leaking" to the bulk environment. Comparative studies of the same photoreactions in micellar media demonstrate that dendritic media offer much better constrainment than the micelles.

Synthesis, fluorescence and photoisomerization studies of azobenzene-functionalized poly(alkyl aryl ether) dendrimers.

A series of azobenzene-functionalized poly(alkyl aryl ether) dendrimers have been synthesized and their photochemical and photophysical properties in solution and as thin films have been investigated. Although the photochemical behavior of the azodendrimers in solution indicated that the azobenzene units behave independently, very similar to the constituent monomer azobenzene unit, the properties of thin solid films of the dendrimers were distinctly different. The azodendrimers, AzoG1, AzoG2, and AzoG3 were observed to form stable supercooled glasses, which showed long-wavelength absorption and red emission characteristics of J-aggregates of the azobenzene chromophores. Reversible photoinduced isomerization of the azodendrimers in the glassy state is described.

Synthesis of poly(alkyl aryl ether) dendrimers.

Poly(alkyl aryl ether) dendrimers of up to four generations composed of a phloroglucinol core, branching components, and pentamethylene spacers are synthesized by a divergent growth methodology. A repetitive synthetic sequence of phenolic O-alkylation and O-benzyl deprotection reactions are adopted for the synthesis of these dendrimers. The peripheries of the dendrimers contain 6, 12, 24, and 48 phenolic hydroxyl groups, either in the protected or unprotected form, for the first, second, third, and fourth generations, respectively. Because of the presence of hydrophilic exterior and relatively hydrophobic interior regions, alkaline aqueous solutions of these dendrimers are able to solubilize an otherwise insoluble pyrene molecule and these supramolecular complexes precipitate upon neutralization of the aqueous solutions.