RESUMO
A dual-color plasmonic random laser under single-excitation is achieved in an ultrathin membrane doped with binary quantum dots and gold nanorods. The gold nanorods tune the luminescence lifetime and emission efficiency of quantum dots. Under single excitation, low-threshold random lasing is observed. Green random lasing at 547 nm is 'turned on' and red random lasing at 630 nm is greatly enhanced by the transversal and longitudinal surface plasmon resonance of the gold nanorods, respectively. Speckle-free color imaging is achieved by using the proposed dual-color random laser source. These properties would facilitate the development of random lasers in fields of illumination and imaging.
RESUMO
In this study, high-order distributed-feedback (DFB) polymer lasers were comparatively investigated. Their performance relies on multiple lasing directions and their advantages include their high manufacturing tolerances due to the large grating periods. Nine laser cavities were fabricated by spin-coating the gain polymer films onto a grating structure, which was manufactured via interference lithography that operated at the 2nd, 3rd, and 4th DFB orders. Low threshold lasing and high slope efficiency were achieved in high-order DFB polymer lasers due to the large grating groove depth and the large gain layer thickness. A high-order DFB configuration shows possible advantages, including the ability to control the lasing direction and to achieve multiple-wavelength lasers. Furthermore, our investigation demonstrates that the increase in threshold and decrease in slope efficiency with an increase in the feedback order can be limited by controlling the structural parameters.
RESUMO
The effect of cavity structures on the tuning properties of polymer lasers was investigated in two common distributed-feedback cavities. The configurations of the two cavities are substrate/grating/active waveguide and substrate/active waveguide/grating, respectively. The polymer lasers were operated in the liquid environment, and the laser wavelength was tuned dynamically by changing the refractive index of the liquid. Polymer lasers based on the substrate/grating/active waveguide structure showed a higher tunability than those based on the substrate/active waveguide/grating structure due to a larger electric field distribution of the laser mode in the liquid environment. It is expected that these results will be useful in the development of tunable laser sources.
RESUMO
A random laser was achieved in a polymer membrane with silver nanoflowers on a flexible substrate. The strong confinement of the polymer waveguide and the localized field enhancement of silver nanoflowers were essential for the low-threshold random lasing action. The lasing wavelength can be tuned by bending the flexible substrate. The solution phase synthesis of the silver nanoflowers enables easy realization of this type of random lasers. The flexible and high-efficiency random lasers provide favorable factors for the development of imaging and sensing devices.
RESUMO
Distributed feedback lasing and surface plasmon lasing were achieved in a single laser device. The laser cavity consisted of a four-layer structure including two metal films, a grating, and a gain material; the cavity was fabricated by combining interference lithography and metal evaporation. A hollow structure was employed to overcome the Joule losses of the metal film. The total thickness of the multilayer structure was 350 nm. The lasing threshold for this hybrid lasing was decreased significantly owing to the coupling between the SP mode in two metal films and the waveguide mode. The combination of SP lasing and distributed feedback lasing could benefit the design of biosensors, all-optical circuits, and electrically pumped devices.
RESUMO
Simultaneous distributed feedback (DFB) lasing and linear polarized random lasing are observed in a compound cavity, which consists of a grating cavity and a random cavity. The grating cavity is fabricated by interference lithography. A light-emitting polymer doped with silver nanoparticles is spin-coated on the grating, forming a random cavity. DFB lasing and random lasing occur when the periodic-random compound cavity is optically pumped. The directionality and polarization of the random laser are modified by the grating structure. These results can potentially be used to design integrated laser sources.