RESUMO
Additive manufacturing (AM) is a revolutionary technology that heralds a new era in metal processing, yet the quality of AM-produced parts is inevitably compromised by cracking induced by severe residual stress. In this study, a novel approach is presented to inhibit cracks and enhance the mechanical performances of AM-produced alloys by manipulating stacking fault energy (SFE). A high-entropy alloy (HEA) based on an equimolar FeCoCrNi composition is selected as the prototype material due to the presence of microcracks during laser powder bed fusion (LPBF) AM process. Introducing a small amount (≈2.4 at%) of Al doping can effectively lower SFE and yield the formation of multiscale microstructures that efficiently dissipate thermal stress during LPBF processing. Distinct from the Al-free HEA containing visible microcracks, the Al-doped HEA (Al0.1CoCrFeNi) is crack free and demonstrates ≈55% improvement in elongation without compromising tensile strength. Additionally, the lowered SFE enhances the resistance to crack propagation, thereby improving the durability of AM-printed products. By manipulating SFE, the thermal cycle-induced stress during the printing process can be effectively consumed via stacking faults formation, and the proposed strategy offers novel insights into the development of crack-free alloys with superior strength-ductility synergy for intricate structural applications.
RESUMO
Fe-Mn-Si shape memory alloys (SMAs) have gained significant attention due to their unique characteristics. However, there remains a gap in the literature regarding the fabrication of these alloys using laser-directed energy deposition (LDED). This study fills this void, investigating the properties of Fe-Mn-Si SMAs produced by LDED. The shape memory performance of as-deposited Fe-Mn-Si SMAs was studied using a tensile method. Alloys underwent different degrees of deformation to assess their shape memory effect. Microstructural evaluations were conducted post-deformation to observe the internal structures of the alloys. The tensile tests revealed that shape recovery rates for deformation levels of 3%, 7%, 11%, and 15% were 68.1%, 44.2%, 31.7%, and 17.6%, respectively. Notably, the maximum recoverable deformation of the LDED-formed Fe-Mn-Si-based shape memory alloy reached 3.49%, surpassing the traditional deformation processing SMAs (<3%). The presence of a significant number of stacking faults was linked to the enhanced shape memory performance. The LDED technique demonstrates promising potential for the fabrication of Fe-Mn-Si SMAs, producing alloys with enhanced shape memory performance compared to traditionally processed SMAs. The study's findings offer new insights and broaden the applicability of LDED in the field of SMAs.