The measurement of broadband ultrasonic attenuation in cancellous bone--a review of the science and technology.

The measurement of broadband ultrasonic attenuation (BUA) in cancellous bone at the calcaneus was first described in 1984. The assessment of osteoporosis by BUA has recently been recognized by Universities UK, within its EurekaUK book, as being one of the "100 discoveries and developments in UK Universities that have changed the world" over the past 50 years, covering the whole academic spectrum from the arts and humanities to science and technology. Indeed, BUA technique has been clinically validated and is utilized worldwide, with at least seven commercial systems providing calcaneal BUA measurement. However, a fundamental understanding of the dependence of BUA upon the material and structural properties of cancellous bone is still lacking. This review aims to provide a science- and technology-orientated perspective on the application of BUA to the medical disease of osteoporosis.

Tumor delineation: The weakest link in the search for accuracy in radiotherapy.

Radiotherapy is one of the most effective modalities for the treatment of cancer. However, there is a high degree of uncertainty associated with the target volume of most cancer sites. The sources of these uncertainties include, but are not limited to, the motion of the target, patient setup errors, patient movements, and the delineation of the target volume. Recently, many imaging techniques have been introduced to track the motion of tumors. The treatment delivery using these techniques is collectively called image-guided radiation therapy (IGRT). Ultimately, IGRT is only as good as the accuracy with which the target is known. There are reports of interobserver variability in tumor delineation across anatomical sites, but the widest ranges of variations have been reported for the delineation of head and neck tumors as well as esophageal and lung carcinomas. Significant interobserver variability in target delineation can be attributed to many factors including the impact of imaging and the influence of the observer (specialty, training, and personal bias). The visibility of the target can be greatly improved with the use of multimodality imaging by co-registration of CT with a second modality such as magnetic resonance imaging (MRI) and/or positron emission tomography. Also, continuous education, training, and cross-collaboration of the radiation oncologist with other specialties can reduce the degree of variability in tumor delineation.

Palangeal quantitative ultrasound, phalangeal morphometric variables, and vertebral fracture discrimination.

The aim of this study was to evaluate the association among phalangeal morphometric parameters, amplitude-dependent speed of sound (AD-SOS), ultrasound bone profile index (UBPI), and spinal bone mineral density (BMD) and fracture status. One hundred women (controls, mean age 53 +/- 12 years) and 40 osteoporotic women (mean age 59 +/- 7 years) with atraumatic fractures, diagnosed by spinal radiographs, were investigated. Quantitative ultrasound (QUS) assessment was performed using the DBM Sonic 1200. Morphological properties of the phalanges were measured from a digitized X-ray image of the hand acquired using industrial film. Spinal BMD was assessed by dual X-ray absorptiometry (DXA) and quantitative computed tomography (QCT). An increase in medullary canal width and a decrease in cortical thickness with aging were observed from the morphometric analysis of the hand radiographs. This phenomenon can be attributed mainly to endosteal resorption. QUS measurements at the phalanges were not significantly related to finger thickness (r <0.20, n.s.). They were significantly correlated to medullary canal ratio (r = -0.57, P <0.0001, for AD-SOS and r = -0.64, P <0.0001, for UBPI) and to cortical thickness (r = +0.52, P <0.0001 for AD-SOS and r = +0.59, P <0.0001 for UBPI). In the discrimination analysis between nonfractured and atraumatic vertebral fracture subjects we found that cortical thickness at the level of the phalanges were similar to lumbar spine BMD. The age and BMI-adjusted odds ratio ranged from 2.0 to 3.1 for QUS, 4.28 for BMD by QCT, 4.1 for BMD by DXA, and 4.1 for cortical thickness. We conclude from these data that phalangeal QUS is related to cortical thickness, which in turn is influenced by endosteal bone resorption occurring in association with spinal osteoporosis.

Does osteoporosis classification using heel BMD agree across manufacturers?

The lack of standardization in bone mineral density (BMD) measurements is known. Several studies have been carried out to cross-calibrate the axial dual X-ray absorptiometry (DXA) devices. Recently, a number of peripheral DXA (pDXA) densitometers have been introduced. In this study we evaluated the agreement between two heel DXA devices on BMD and T-scores. A total of 99 females aged 21-78 years (ca. 16 per decade) had their non-dominant heel BMD measured using the PIXI (Lunar Inc.) and the Apollo (Norland Medical) pDXA scanners. The mean BMD values were 0.492 and 0.607 g/cm(2) and the mean T-scores using manufacturers' specified reference data were -0.07 and -0.25 for the PIXI and Apollo, respectively. Both the BMD and T-score intermachine relationships were highly correlated but showed significant nonidentity slopes and non-zero offsets. The diagnostic comparison on T-scores resulted in 86% agreement between the instruments (weighted kappa score of 0.550). Normalizing the reference peaks and SDs using this study's young adult population BMD results removed the systematic T-score disagreement. We found that PIXI and Apollo are highly correlated. Differences in BMD values are mainly due to different region of interest (ROI) definitions and additional T-score disagreement reflects the difference in normative databases.

Influence of region of interest and bone size on calcaneal BMD: implications for the accuracy of quantitative ultrasound assessments at the calcaneus.

There is considerable technological diversity among quantitative ultrasound (QUS) devices used to assess osteoporosis. Because the distance between the transducer and the footplate remains constant, the location of the calcaneus measured will vary with foot size. This study was designed to quantify the variation in bone mineral density (BMD) between a manufacturer's region of interest (ROI_M), which is fixed relative to the footplate, and an anatomical region of interest (ROI_A), which is defined as 20% of calcaneal length. The effect of foot length and width on QUS variables measured using two Food and Drug Administration cleared QUS devices, the Sahara (Hologic) and the Achilles+ (Lunar) was assessed. 26 healthy subjects (12 male and 14 female), aged 22-54 years (35.6+/-10 years) and with foot lengths of 21.5 cm to 29.7 cm (25.1+/-2.3 cm) were recruited. QUS assessments were performed at the right calcaneus. In addition, a Hologic 4500 densitometer was used to measure the BMD of the calcaneus in the ROI_M and ROI_A. The sizes of the ROIs were approximated to the sizes of the transducers of the Sahara and Achilles+ devices. The results showed a significant difference in BMD between the two ROI locations for the Sahara device (BMD 0.642+/-0.135 g cm(-2) vs 0.616+/-0.114 g cm(-2), p=0.014), but no significant difference was found in BMD between the two locations for the Achilles device (BMD 0.661+/-0.120 g cm(-2) vs 0.662+/-0.123 g cm(-2), p=0.818). At the ROI_A, there was a significant difference in BMD between the two QUS devices (p<0.001). The correlation between QUS variables and BMD was slightly higher for the ROI_M (r=0.68-0.79, since this is site-matched) than the ROI_A (r=0.59-0.70) for the Achilles device, while for the Sahara device the correlations were r=0.35-0.40 and r=0.51-0.54, respectively. The smaller ROI of the Sahara device resulted in more than 50% of the subjects having BMD differences of greater than 5% between the ROI_A and the ROI_M, compared with only 20% of the subjects on the Achilles device. ROIs containing cortical bone edge and other soft tissues were found in 58% of cases for the Achilles device and 46% of cases for the Sahara device. The greatest differences occurred in very small and very large feet. Calcaneal length correlated significantly with Sahara speed of sound (SOS), and heel width correlated significantly with Achilles SOS. Heel width also correlated significantly with Sahara broadband ultrasound attenuation (BUA) but not Achilles+ BUA. These results suggest that variation in ROI and bone size might affect the accuracy of QUS measurements, since the calcaneus is heterogeneous both in terms of its external geometry and its internal structure and density.

Assessment of bone status using speed of sound at multiple anatomical sites.

Studies in vitro and in vivo have shown that quantitative ultrasound (QUS) is a valid tool for the assessment of bone status. Current QUS methods using the transmission technique are limited to one peripheral bone site. A new system, Sunlight Omnisense (Omnisense, Sunlight Medical Ltd., Rehovot, Israel), measures speed of sound (SOS, in m/s) along the surface of the bone based on an axial transmission technique. The Omnisense can measure SOS at several anatomical sites. This study evaluated the SOS at different anatomical sites in a healthy population. A total of 334 adult women from three research centers in the USA and Canada with a mean (+/- SD) age of 48.8 (+/- 17.4) years were enrolled in this study. SOS was measured at the proximal third phalanx, distal one third radius, midshaft tibia, and fifth metatarsal. The mean SOS (+/- SD) values for the phalanx, radius, tibia and metatarsal were 3984 (+/- 221), 4087 (+/- 147), 3893 (+/- 150) and 3690 (+/- 246) m/s, respectively. Each anatomical site SOS was significantly different (p < 0.001) from that of the other sites. SOS at the different anatomical sites was modestly, but significantly, correlated (r = 0.31 to 0.56, p < 0.001). Similar correlation coefficients were obtained for the T scores. The mean T scores for subjects over the age of 60 years were -1.94, -2.01, -0.97 and -1.42 for the phalanx, radius, tibia and metatarsal, respectively. The age of peak SOS and the rate of change thereafter varied with anatomical site, implying that the prevalence of osteopenia and osteoporosis was site-dependent if only one T score cut-off point was used. Comparing individuals, 10% to 17% of patients had T scores that differed by more than a factor of 2 between sites. Weight and age were some of the contributing factors to this heterogeneity. The Omnisense provides an opportunity to assess bone status at different anatomical sites. Whether or not combining measurements from all these anatomical sites will improve osteoporosis management still needs to be determined.

Multisite bone ultrasound measurement on North American female reference population.

The Sunlight Omnisense is a portable quantitative ultrasound device that measures speed of sound (SOS) at multiple skeletal sites and therefore has the potential to provide a more complete assessment of an individual's overall fracture risk than single-site measurements such as the calcaneus. To provide a robust normative female database, 545 healthy Caucasian women ages 20-90 were recruited at five centers across North America. SOS measurements were obtained from the distal one-third radius, proximal third phalanx, midshaft tibia, and fifth metatarsal. The results demonstrate that peak SOS occurs around the age of 40, with maximum mean values of 4161, 3928, 3786, and 4092 m/s seen at the radius, tibia, metatarsal, and phalanx, respectively. Maximal rate of decline of SOS was seen in the decade following menopause (-12.4, -9.2, -12.1, and -18.8 m/s at the radius, tibia, metatarsal, and phalanx, respectively). Reproducibility between successive measurements indicates high precision, with standardized coefficients of variance ranging between 1.5 and 4.5%. Greatest precision was seen at the metatarsal. Further work is required to clarify the biologic significance of multisite SOS measurements and their use in the assessment of fracture risk.

Is quantitative ultrasound dependent on bone structure? A reflection.

Trabecular bone plays a significant role in maintaining bone structural integrity. Its density is a significant determinant of bone strength and fracture risk, but there is still unexplained variance. It has been suggested that the ability to measure structural information will improve the estimation of bone strength and fracture risk. Quantitative ultrasound (QUS) is a mechanical wave that can be influenced by bone structure, in addition to bone mineral density (BMD). This article reviews the evidence in the literature supporting or refuting this assumption. Theoretically, the propagation of QUS is influenced by both structure and density of the medium. QUS measurement in vivo shows weak but significant association with axial BMD. However, the association becomes stronger when measured in vitro. Broadband ultrasound attenuation (BUA) exhibits a nonlinear relationship with density over a large density range. When cubes of cancellous bone are measured in the three orthogonal directions, both BUA and speed of sound (SOS) show significant anisotropy which mirrors mechanical anisotropy. QUS has also been shown to correlate significantly with structural parameters measured by histomorphometry. However, structure remains a significant predictor after adjustment for BMD mainly in bovine samples. Other studies using phantoms of bone samples have also demonstrated that QUS is dependent on structure. There is preliminary indication that fractal dimensions are significantly associated with QUS. The ultimate usefulness of structural dependence of QUS will be in its ability to improve bone strength estimation above and beyond density. There is ample evidence documenting the ability of QUS to predict bone strength in vitro. BMD is a significant predictor of bone strength and the additive value of structure in estimating bone strength is variable. Clinically, ultrasound of the calcaneus is measured in one direction (medio-lateral) and the structural variation in this direction may be limited. Nevertheless, QUS can provide useful additional information to that provided by axial BMD due in part to different precision and accuracy errors and to biological discordance. On the whole one could conclude that ultrasound attenuation is due to structural parameters and these variables are also dependent on density.

Evaluation of a gel-coupled quantitative ultrasound device for bone status assessment.

OBJECTIVE: To evaluate a new gel-coupled calcaneal quantitative ultrasound system, Osteospace (Medilink, Montpellier, France), which was designed to assess the status of bone in the calcaneus. METHODS: The study group consisted of 215 healthy white women aged 20 to 85 years and 51 white women aged 60 to 86 years with osteoporotic fractures. Fifty-two healthy women aged 50 to 85 years were randomly selected from the healthy cohort as the control group. All the women had calcaneal quantitative ultrasonic measurements. The women with osteoporotic fractures and the control group also had proximal femur and lumbar anteroposterior spine bone mineral density measurements using dual X-ray absorptiometry. Bone mineral density was also measured in a subgroup of 54 women at the calcaneus. RESULTS: There was a significant inverse correlation of broadband ultrasound attenuation and speed of sound with age (P < .001). Short-term measurement precision values expressed as coefficients of variation were 1.72% for broadband ultrasound attenuation and 0.64% for speed of sound, and standardized short-term precision values were 6.09% for broadband ultrasound attenuation and 3.87% for speed of sound. The correlations between the quantitative ultrasonic parameters and calcaneal bone mineral density were 0.69 (P = .0001) for broadband ultrasound attenuation and 0.45 (P = .0008) for speed of sound. Both quantitative ultrasonic parameters and all bone mineral density measurements of the hip and spine differed significantly between the control and osteoporotic fracture groups (P < .01). Age-, weight-, and height-adjusted odds ratios per SD decrease were as follows: broadband ultrasound attenuation, 1.79; speed of sound, 1.83; spine bone mineral density, 2.34; femoral neck bone mineral density, 1.69; and total hip bone mineral density, 1.85. The areas under the receiver operating characteristic curve for quantitative ultrasound parameters and bone mineral density measurements were close, ranging from 0.75 to 0.80. CONCLUSIONS: This new quantitative ultrasound system can detect age- and menopause-related influences on skeletal status and can discriminate healthy women from those with osteoporotic fractures in a manner comparable with that of bone mineral density measurement by dual X-ray absorptiometry.

Use of quantitative ultrasound to assess bone status in children with juvenile idiopathic arthritis: a pilot study.

Periarticular osteoporosis around inflammed joints and generalized osteoporosis have been shown to be markers of disease activity and severity in children with juvenile idiopathic arthritis (JIA). Bone mineral density (BMD) in adults can be assessed precisely by dual X-ray absorptiometry (DXA), but this technique has not been used widely in children. Quantitative ultrasound (QUS) may provide an alternative method for assessment of bone status. The aim of this pilot study was to compare QUS to DXA in assessing generalized osteoporosis in a cohort of patients JIA. Twenty-two Caucasian children (15 females, 7 males) with JIA of duration 19-142 months (mean 71 mo) and age 7-17 yr were recruited. Total body and lumbar spine BMD and bone mineral content (BMC) were measured by DXA using standard procedures on a Lunar DPX-L scanner. QUS was performed using Myriad SoundScan 2000. Speed of sound (SOS) was measured at the right midtibia. The DXA results were compared to QUS using linear regression analysis. Spine and total body BMD measured by DXA correlated significantly with tibia SOS (spine: r = 0.57, p < 0.007; total body: r = 0.68, p < 0.001). Spine BMC was similarly related to SOS as BMD (r = 0.58, p < 0.007). Individual patient weight and height were strong predictors of BMD, but only moderate predictors of SOS. The mean spine BMD was lower in the JIA patients compared to the normal ranges (mean Z-score of -1.19). BMD Z-scores were negatively associated with disease duration. Patients taking steroids were associated with lower Z-scores. In conclusion, SOS shows a significant correlation with BMD as measured by DXA, albeit with wide 95% confidence intervals in this small pilot study. QUS was also well tolerated and was technically easy to perform in these children. With the added advantage that it is free from radiation risk, further assessment of this potentially valuable tool for measuring bone status in children is warranted.

Bone loss. Quantitative imaging techniques for assessing bone mass in rheumatoid arthritis.

Osteoporosis is associated with low bone mass and microarchitectural deterioration of bone tissue with clinical manifestation of low trauma fractures. Rheumatoid arthritis (RA) is a risk factor due to generalized and articular bone loss. This minireview presents past and current bone mass measurement techniques in RA. These techniques include: plain radiographs, absorptiometry, quantitative computed tomography (QCT) and ultrasound. The most widely used technique is dual x-ray absorptiometry (DXA). RA patients have lower bone mass as compared with normals and substantial bone loss may occur early after the onset of disease. Measurement of bone mineral density (BMD) at the hand using either DXA or ultrasound maybe a useful tool in the management of RA patients.

Evaluation of a new body composition phantom for quality control and cross-calibration of DXA devices.

This study evaluated a new body composition phantom and its use for quality control and cross-calibration of dual-energy X-ray absorptiometry (DXA) instruments for measurements of body composition. We imaged the variable composition phantom (Lunar, Madison, WI) on eight different DXA devices. Deviations of up to 7% fat were observed when we compared the percent fat values measured by the different devices with the nominal values provided by the manufacturer. Absolute precision error of percent fat measurements for the phantom ranged from 0.6 to 0.8%. The phantom's percent fat values were also compared with whole body composition measurements from 130 female and male volunteers. The phantom detected differences in percent fat values that were similar to those found by comparing in vivo measurements with values from different DXA scanner models from the same manufacturer. When comparing different models of scanners from different manufacturers, such as the Hologic QDR-4500 and the Lunar DPX-IQ, the phantom showed a different relationship than was seen for patients. Therefore, corrections or comparisons based on the phantom data alone would be incorrect. In conclusion, the Lunar variable composition phantom is capable of accurately measuring the fat calibration of DXA devices and may be suitable for cross-sectional cross-calibration between scanners from the same manufacturer; however, for comparison of DXA scanners from different manufacturers, in vivo cross-calibration is still the only accurate method. The phantom may be used in longitudinal quality control to verify an instrument's temporal stability.

Assessment of a new quantitative ultrasound calcaneus measurement: precision and discrimination of hip fractures in elderly women compared with dual X-ray absorptiometry.

The incidence of osteoporotic hip fracture increases in postmenopausal women with low hip bone mineral density (BMD). Dual X-ray absorptiometry (DXA) is the most commonly used technique for the assessment of bone status and provides good measurement precision. However, DXA affords little information about bone architecture. Quantitative ultrasound (QUS) systems have been developed to evaluate bone status for assessment of fracture risk. Our study was designed to assess a new QUS system from Hologic, the Sahara; to compare it with a previous model, the Walker-Sonix UBA 575+; and to investigate whether it is able to discriminate between women with and without fracture. Using both ultrasound devices, the measurements were performed at the heels of 33 postmenopausal women who had recently sustained hip fracture. A control group of 35 age-matched postmenopausal women was recruited for comparison. The total, neck and trochanter femoral BMD values were assessed using DXA for both groups. QUS and DXA measurements were significantly lower in fractured patients (p < 0.005) than in the control group. The short-term, mid-term and standardized short-term precisions were used to evaluate the reproducibility of the two QUS systems. The Sahara showed a better standardized coefficient of variation for broadband ultrasound attenuation (BUA) than did the UBA 575+ (p < 0.001). The correlation of BUA and speed of sound (SOS) between the two QUS devices was highly significant, with an r value of 0.92 for BUA and 0.91 for SOS. However, the correlation between DXA and ultrasound parameters ranged from 0.28 to 0.44. We found that ultrasound measurements at the heel were significant discriminators of hip fractures with odds ratios (OR) ranging from 2.7 to 3.2. Even after adjusting the logistic regressions for total, neck or trochanter femoral BMD, QUS variables were still significant independent discriminators of hip fracture. The areas under the ROC curves of each ultrasound parameter ranged from 0.75 to 0.78, and compared very well with femoral neck BMD (p > 0.05). In conclusion, our study indicated that the calcaneal QUS variables, as measured by the Sahara system can discriminate hip fracture patients equally as well as hip DXA.

Prediction of bone strength of distal forearm using radius bone mineral density and phalangeal speed of sound.

This investigation compares quantitative ultrasound (QUS) measurement of the phalanges with peripheral quantitative computed tomography (pQCT) and dual X-ray absorptiometry (DXA) measurement of the forearm, to estimate the strength of the distal radius in 13 cadaveric forearms. The cadavers were scanned at the distal radius by pQCT and DXA for bone mineral density (BMD) and at the approximate phalanges by QUS for speed of sound (SOS). The distal radii were subjected to a simulated Colles fracture produced with a materials testing machine. The load at which the distal radius was fractured was considered as a representation of bone strength. The bone strength correlated significantly with SOS at different phalanges (r = 0.63-0.72), BMD at different regions of interest by DXA (r = 0.67-0.75), and cortical BMD at different sites by pQCT (r = 0.61-0.67). Standard stepwise regression analysis showed that adding phalangeal SOS into forearm densitometric variables significantly enhanced the statistical power for prediction of the strength of the distal radius. Our results suggest that, for assessment of site-specific distal forearm strength, QUS measurement of the phalanges is comparable to forearm densitometry. Phalangeal QUS may add clinical value if distal forearm strength has a high priority.

Comparison of an imaging heel quantitative ultrasound device (DTU-one) with densitometric and ultrasonic measurements.

The purpose of this study was to evaluate a new imaging ultrasound scanner for the heel, the DTU-one (Osteometer MediTech, Denmark), by comparing quantitative ultrasound (QUS) results with bone mineral density (BMD) of the heel and femur from dual X-ray absorptiometry (DXA), and by comparing the DTU-one with another QUS device, the UBA 575+. The regions of interest in the DXA heel scan were matched with the regions evaluated by the two QUS devices. 134 healthy and 16 osteoporotic women aged 30-84 years old were enrolled in the study. In vivo short-term precision of the DTU-one for broadband ultrasound attenuation (BUA) and speed of sound (SOS) was 2.9% and 0.1%, respectively, and long-term precision was 3.8% and 0.2%, respectively. Highest correlations (r) between QUS and BMD measurements were achieved when comparing DTU-one results with BMD in matched regions of the DXA heel scan. Correlation coefficients (r) were 0.81 for BUA and SOS. Highest correlations with the UBA 575+ were 0.68 and 0.72, respectively. The comparison of BMD in different femoral sites with BUA and SOS (DTU-one) varied from 0.62 to 0.69 when including the entire study population. The correlation between BMD values within different sites of the femur tended to be higher (from r = 0.81 to 0.93). When comparing BUA with BUA and SOS with SOS on the two QUS devices, the absolute QUS values differed significantly. However, correlations were relatively high, with 0.76 for BUA and 0.82 for SOS. In conclusion, the results of the new quantitative ultrasound device, the DTU-one, are highly correlated (r = 0.8) with results obtained using the UBA 575+ and with BMD in the heel. The precision of the DTU-one is comparable to other QUS devices for BUA and is high for SOS.

Comparison of six calcaneal quantitative ultrasound devices: precision and hip fracture discrimination.

Quantitative ultrasound (QUS) is now accepted as a useful tool in the management of osteoporosis. There are a variety of QUS devices clinically available with a number of differences among them, including their coupling methods, parameter calculation algorithms and sites of measurement. This study evaluated the abilities of six calcaneal QUS devices to discriminate between normal and hip-fractured subjects compared with the established method of dual-energy X-ray absorptiometry (DXA). The short-term and mid-term precisions of these devices were also determined. Thirty-five women (mean age 74.5+/-7.9 years) who had sustained a hip fracture within the past 3 years, and 35 age-matched controls (75.8+/-5.6 years) were recruited. Ultrasound measurements were acquired using six ultrasound devices: three gel-coupled and three water-coupled devices. Bone mineral density was measured at the hip using DXA. Discrimination of fracture patients versus controls was assessed using logistic regression analysis (expressed as age- and BMI-adjusted odds ratios per standard deviation decrease with 95% confidence interval) and receiver operating characteristics (ROC) curve analysis. Measurement precision was standardized to the biological range (sCV). The sCV ranged from 3.14% to 5.5% for speed of sound (SOS) and from 2.45% to 6.01% for broadband ultrasound attenuation (BUA). The standardized medium-term precision ranged from 4.33% to 8.43% for SOS and from 2.77% to 6.91% for BUA. The pairwise Pearson correlation coefficients between different devices was highly significant (SOS, r = 0.79-0.93; BUA, r = 0.71-0.92). QUS variables correlated weakly, though significantly, with femoral BMD (SOS, r = 0.30-0.55; BUA, r = 0.35-0.61). The absolute BUA and SOS values varied among devices. The gel-coupled devices generally had a higher SOS than water-coupled devices. Bone mineral density (BMD) and BUA were weakly correlated with weight (r = 0.48-0.57 for BMD and r = 0.18-0.54 for BUA), whereas SOS was independent of weight. All the QUS devices gave similar, statistically significant hip fracture discrimination for both SOS and BUA measures. The odds ratios for SOS (2.1-2.8) and BUA (2.4-3.4) were comparable to those for femoral BMD (2.6-3.5), as were the area under the curve (SOS, 0.65-0.71; BUA, 0.62-0.71; BMD, 0.65-0.74) from ROC analysis. Within the limitation of the sample size all devices show similar diagnostic sensitivity.

Estimation of wrist fracture load using phalangeal speed of sound: an in vitro study.

This study aimed to evaluate the ability of speed of sound (SOS) measured at the phalanges to estimate simulated wrist fracture load and stress. SOS was measured along the proximal phalanges of the second, third and fourth fingers using an ultrasound (US) system operating in axial transmission mode. The bone mineral density (BMD) of the radius and the phalanges was also measured with quantitative computed tomography (QCT) and dual x-ray absorptiometry (DXA), and the combined cortical thickness (CCT) of the phalanges was measured from hand radiographs. After the measurements were completed, the radius was excised from the cadaver, embedded in polymethylmethacrylate and tested to failure on a servohydraulic testing machine. The configuration of the radius was chosen to simulate a fall onto the hand. Linear regression analysis showed a highly significant correlation between SOS (r = 0.76-0.94, p < 0.001), CCT (r = 0.86-0.90, p < 0.001) and BMD (r = 0.92-0.96, p < 0.0001) in the three proximal phalanges measured. SOS, BMD and CCT were significant predictors of fracture load (r = 0.60-0.69, p < 0.03) and stress (r = 0.65-0.77, p < 0.02). Cortical area and bone mineral content (BMC) of the radius were consistently higher predictors of fracture load (r = 0.76-0.82, p < 0.01 for area and r = 0.78-0.88, p < 0.01 for BMC) than BMD. The correlation of BMC and area was poorer with fracture stress. In a step-wise regression analysis using both phalangeal BMD and SOS, only SOS remained a significant predictor of fracture stress. In forward stepwise regression analysis, both cortical area and SOS were entered into the regression model to estimate fracture load. Only SOS remained significant in the model for estimating fracture stress. Phalangeal BMD was only entered in the combined model with the cortical area at the 4% site (r = 0.84, p = 0.002). Phalangeal SOS is a useful parameter in the assessment of bone status of the radius.

Factors influencing the speed of sound through the proximal phalanges.

The amplitude-dependent speed of sound (AD-SOS) in the proximal phalanges is reported to be sensitive to osteoporotic changes. We investigated the influence of bone thickness and cortical thickness on AD-SOS. Phantoms made of Perspex were designed to simulate different bone width (11-16 mm) and cortical thickness (3-7.5 mm). The phantoms were designed with two opposing flat and cylindrical surfaces. The effect of cortical thickness was examined by drilling holes (simulating the medullary canal) of different diameters (1-7 mm) in the middle of the Perspex cylinders. The effect of sample thickness was investigated on solid Perspex phantoms of varied lengths. The standardized precision errors of AD-SOS measurement in vivo and in vitro on volunteers and phantoms were 2.8 and 0.9%, respectively. AD-SOS was influenced by the bone width, cortical thickness, and location along the phalanx. A decrease in either cortical width or cortical thickness resulted in a decrease in AD-SOS. The effect is dependent on whether the contact surface is curved or flat. It is possible that a curved surface has a focusing effect on the wave through the porous core, whereas for a flat surface, the path of the waves might not pass through the center. When cortical thickness and bone width were expressed as a ratio, there was a linear relationship between this ratio and AD-SOS through the phantoms. AD-SOS was independent of thickness for samples greater than 11 mm.