Solid Rocket Propellant Photo-Polymerization with an In-House LED-UV Prototype.

Composite solid propellants have used cast molding production technology for many decades, with intrinsic limitations on production flexibility, promptness, and grain geometry, as well as environmental implications on toxicity and global carbon footprint. This traditional method involves the use of toxic chemicals, has a long processing time, requires high temperature, and the products have limited geometries. To overcome those issues, different photo-curable resins have been evaluated as possible matrices. In fact, the UV-curing process is fast and has low energy consumption. The photocuring reaction parameters of six different pristine formulations were evaluated by Fourier transform infrared spectroscopy analysis. After finding the optimal curing parameters, different composites were prepared by adding 75 or 80 wt% ammonium sulfate particles used as an inert replacement for the oxidant. The thermomechanical properties and thermal resistance of the UV-cured composites were characterized via dynamic thermal-mechanical and thermogravimetric analysis. Subsequently, the mechanical properties of the inert propellants were investigated by tensile tests. The most promising resin systems for the production of solid rocket propellants were then 3D printed by an in-house developed illumination system and the obtained object micro-structure was evaluated by X-ray computed tomography.

Rapid Identification and Classification of Pathogens That Produce Carbapenemases and Cephalosporinases with a Colorimetric Paper-Based Multisensor.

Infections caused by bacteria that produce ß-lactamases (BLs) are a major problem in hospital settings. The phenotypic detection of these bacterial strains requires culturing samples prior to analysis. This procedure may take up to 72 h, and therefore it cannot be used to guide the administration of the first antibiotic regimen. Here, we propose a multisensor for identifying pathogens bearing different types of ß-lactamases above the infectious dose threshold within 90 min that does not require culturing samples. Instead, bacterial cells are preconcentrated in the cellulose scaffold of a paper-based multisensor. Then, 12 assays are performed in parallel to identify whether the pathogens produce carbapenemases and/or cephalosporinases, including metallo-ß-lactamases, extended-spectrum ß-lactamases (ESBLs), and AmpC enzymes. The multisensor generates an array of colored spots that can be quantified with image processing software and whose interpretation leads to the detection of the different enzymes depending on their specificity toward the hydrolysis of certain antibiotics, and/or their pattern of inhibition or cofactor activation. The test was validated for the diagnosis of urinary tract infections. The inexpensive paper platform along with the uncomplicated colorimetric readout makes the proposed prototypes promising for developing fully automated platforms for streamlined clinical diagnosis.

UV-Cured Chitosan and Gelatin Hydrogels for the Removal of As(V) and Pb(II) from Water.

In this study, new photocurable biobased hydrogels deriving from chitosan and gelatin are designed and tested as sorbents for As(V) and Pb(II) removal from water. Those renewable materials were modified by a simple methacrylation reaction in order to make them light processable. The success of the reaction was evaluated by both 1H-NMR and FTIR spectroscopy. The reactivity of those formulations was subsequently investigated by a real-time photorheology test. The obtained hydrogels showed high swelling capability reaching up to 1200% in the case of methacrylated gelatin (GelMA). Subsequently, the Z-potential of the methacrylated chitosan (MCH) and GelMA was measured to correlate their electrostatic surface characteristics with their adsorption properties for As(V) and Pb(II). The pH of the solutions proved to have a huge influence on the As(V) and Pb(II) adsorption capacity of the obtained hydrogels. Furthermore, the effect of As(V) and Pb(II) initial concentration and contact time on the adsorption capability of MCH and GelMA were investigated and discussed. The MCH and GelMA hydrogels demonstrated to be promising sorbents for the removal of heavy metals from polluted waters.

Cationic UV-Curing of Epoxidized Biobased Resins.

Epoxy resins are among the most important building blocks for fabrication of thermosets for many different applications thanks to their superior thermo-mechanical properties and chemical resistance. The recent concerns on the environmental problems and the progressive depletion of petroleum feedstocks have drawn the research interest in finding biobased alternatives. Many curing techniques can be used to obtain the final crosslinked thermoset networks. The UV-curing technology can be considered the most environmentally friendly because of the absence of volatile organic compound (VOC) emissions and mild curing conditions. This review provides an overview of the state of the art of bio-based cationic UV-curable epoxy resins. Particular focus has been given to the sources of the bio-based epoxy monomers and the applications of the obtained products.

Light Processable Starch Hydrogels.

Light processable hydrogels were successfully fabricated by utilizing maize starch as raw material. To render light processability, starch was gelatinized and methacrylated by simple reaction with methacrylic anhydride. The methacrylated starch was then evaluated for its photocuring reactivity and 3D printability by digital light processing (DLP). Hydrogels with good mechanical properties and biocompatibility were obtained by direct curing from aqueous solution containing lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) as photo-initiator. The properties of the hydrogels were tunable by simply changing the concentration of starch in water. Photo-rheology showed that the formulations with 10 or 15 wt% starch started curing immediately and reached G' plateau after only 60 s, while it took 90 s for the 5 wt% formulation. The properties of the photocured hydrogels were further characterized by rheology, compressive tests, and swelling experiments. Increasing the starch content from 10 to 15 wt% increased the compressive stiffness from 13 to 20 kPa. This covers the stiffness of different body tissues giving promise for the use of the hydrogels in tissue engineering applications. Good cell viability with human fibroblast cells was confirmed for all three starch hydrogel formulations indicating no negative effects from the methacrylation or photo-crosslinking reaction. Finally, the light processability of methacrylated starch by digital light processing (DLP) 3D printing directly from aqueous solution was successfully demonstrated. Altogether the results are promising for future application of the hydrogels in tissue engineering and as cell carriers.

Sustainable access to fully biobased epoxidized vegetable oil thermoset materials prepared by thermal or UV-cationic processes.

Beyond the need to find a non-toxic alternative to DiGlycidyl Ether of Bisphenol-A (DGEBA), the serious subject of non-epichlorohydrin epoxy resins production remains a crucial challenge that must be solved for the next epoxy resin generations. In this context, this study focuses on the valorization of vegetable oils (VOs) into thermoset materials by using (i) epoxidation of the VOs through the "double bonds to epoxy" synthetic route and (ii) synthesis of crosslinked homopolymers by UV or hardener-free thermal curing processes. A thorough identification, selection and physico-chemical characterization of non-edible or non-valuated natural vegetable oils were performed. Selected VOs, characterized by a large range of double bond contents, were then chemically modified into epoxides thanks to an optimized, robust and sustainable method based on the use of acetic acid, hydrogen peroxide and Amberlite® IR-120 at 55 °C in toluene or cyclopentyl methyl ether (CMPE) as a non-hazardous and green alternative solvent. The developed environmentally friendly epoxidation process allows reaching almost complete double bond conversion with an epoxy selectivity above 94% for the 12 studied VOs. Finally, obtained epoxidized vegetable oils (EVOs), characterized by an epoxy index from 2.77 to 6.77 meq. g-1 were cured using either UV or hardener-free thermal curing. Both methods enable the synthesis of 100% biobased EVO thermoset materials whose thermomechanical performances were proved to linearly increase with the EVOs' epoxy content. This paper highlights that tunable thermomechanical performances (T α from -19 to 50 °C and T g from -34 to 36 °C) of EVO based thermoset materials can be reached by well selecting the starting VO raw materials.