High speed, high fidelity detection of an atomic hyperfine qubit.

Fast and efficient detection of the qubit state in trapped ion systems is critical for implementing quantum error correction and performing fundamental tests such as a loophole-free Bell test. In this work we present a simple qubit state detection protocol for a (171)Yb+ hyperfine atomic qubit trapped in a microfabricated surface trap, enabled by high collection efficiency of the scattered photons and low background photon count rate. We demonstrate average detection times of 10.5, 28.1, and 99.8 µs, corresponding to state detection fidelities of 99%, 99.856(8)%, and 99.915(7)%, respectively.

Multiscale optics for enhanced light collection from a point source.

High-efficiency collection of photons emitted by a point source over a wide field of view (FoV) is crucial for many applications. Multiscale optics offer improved light collection by utilizing small optical components placed close to the optical source, while maintaining a wide FoV provided by conventional imaging optics. In this work, we demonstrate collection efficiency of 26% of photons emitted by a pointlike source using a micromirror fabricated in silicon with no significant decrease in collection efficiency over a 10 mm object space.

Systematic analysis of micromixers to minimize biofouling on reverse osmosis membranes.

Micromixers, UV-curable epoxy traces printed on the surface of a reverse osmosis membrane, were tested on a cross-flow system to determine their success at reducing biofouling. Biofouling was quantified by measuring the rate of permeate flux decline and the median bacteria concentration on the surface of the membrane (as determined by fluorescence intensity counts due to nucleic acid stains as measured by hyperspectral imaging). The micromixers do not appear to significantly increase the pressure needed to maintain the same initial permeate flux and salt rejection. Chevrons helped prevent biofouling of the membranes in comparison with blank membranes. The chevron design controlled where the bacteria adhered to the membrane surface. However, blank membranes with spacers had a lower rate of permeate flux decline than the membranes with chevrons despite having greater bacteria concentrations on their surfaces. With better optimization of the micromixer design, the micromixers could be used to control where the bacteria will adhere to the surface and create a more biofouling resistant membrane that will help to drive down the cost of water treatment.