Chromium removal from aqueous solutions using new silica gel conjugates of desferrioxamine or diethylenetriaminepentaacetic acid.

Desferrioxamine (DFO) and diethylenetriaminepentaacetic acid (DTPA) conjugated with silica gel (IDFOSG and IDTPASG, respectively) were evaluated as adsorbents for chromium in aqueous solutions. Different parameters affecting adsorption such as pH, sorbent dosage, contact time, sample volume and potential of interfering ions have been optimized. The optimum pH for chromium binding was 4 for 100 mg of adsorbents at 5 min of table shaking with 5 mL sample volume of chromium solutions. Langmuir adsorption model described the removal of chromium ions. The adsorption capacity for chromium was 90% for IDFOSG and 83% for IDTPASG in single solutions, and at least 75% in multielemental solutions. Considering the removal efficacy, regeneration and stability, DFO-grafted silica gel was generally superior to its DTPA counterpart and may be applied to the removal of traces of chromium species from natural waters.

Matte photographic paper as a low-cost material for metal ion retention and elemental measurements with laser-induced breakdown spectroscopy.

Matte photographic paper was explored as a low-cost material for metal-ion retention. The extraction was promoted by ultrasound, the mechanical waves of which forced adhesion to the photographic paper surface of an ion pair formed by DTAB (dodecyltrimethylammonium bromide) with the anionic coordination complex formed by metal ions and SPADNS (1,8-dihydroxy-2-(4-sulfophenylazo)naphthalene-3,6-disulfonic acid trisodium salt). As a proof of concept, the migration of copper ions present in aqueous solution to the solid phase and their direct measurement by laser-induced breakdown spectroscopy (LIBS) was evaluated. The main parameters that affected the extraction (paper type and sonication time) and analyte detection in the solid phase (delay, spot size and accumulated number of pulses) were optimised in a univariate way. The conditions influencing the complexation reaction and formation of the ion pair in aqueous solution (pH and copper, SPADNS and DTAB concentrations) were set according to a previous study. Under the optimised conditions, it was possible to use this extraction technology as an alternative in determining copper content in aqueous solutions by LIBS, overcoming the intrinsic difficulties of this instrumental technique in the analysis of liquid samples. The calibration curves were obtained in a linear range of 0.50-7.50 mg L-1 copper in solution, with detection and quantification limits estimated at 0.08 and 0.24 mg L-1, respectively. The precision of the method was less than 4.3% and the accuracy was checked by spike and recovery tests on liquid samples with different chemical compositions and by comparison of LIBS results with graphite furnace atomic absorption spectrometry data. The potential of the proposed method for extraction of Al3+, Ag+, Fe3+, Mn2+, Ni2+ and Zn2+ was also evaluated and adequate extraction efficiencies were obtained. The proposed method stands out due to its low cost and ease of execution.

Elemental imaging by Laser-Induced Breakdown Spectroscopy to evaluate selenium enrichment effects in edible mushrooms.

Mushrooms are bioaccumulating organisms commonly used in selenium (Se) enrichment studies. However, the addition of Se in the culture medium may alter the distribution of other essential elements in the mushroom fruiting body. To evaluate the effects of the Se enrichment, Ca, Mg, and K distributions in pink oyster (Pleurotus djamor) and K and Mg distributions in white oyster (Pleurotus ostreatus) mushrooms were mapped by laser-induced breakdown spectroscopy (LIBS), which can be used at room temperature and requires minimal or no sample preparation. It was verified that Se enrichment favoured the accumulation of Ca in the lower part of the pink oyster mushroom and prevented the transport of this element to the edges and tops. The Se enrichment also altered the distribution of K and Mg, decreasing the numerical correlation between the K and Mg distributions (R² = 0.5871). In the white oyster mushroom, however, despite the changes in the morphological characteristics of the fruiting bodies after enrichment, there were generally nonsignificant differences in the K and Mg distributions between the control and the Se-enriched mushrooms.

Desferrioxamine-caffeine (DFCAF) as a cell permeant moderator of the oxidative stress caused by iron overload.

Desferrioxamine (DFO) is a potent iron chelator used in the treatment of iron overload (IO) disorders. However, due to its low cell permeability and fast clearance, DFO administration is usually prolonged and of limited use for the treatment of IO in tissues such as the brain. Caffeine is a safe, rapidly absorbable molecule that can be linked to other compounds to improve their cell permeability. In this work, we successfully prepared and described DFO-caffeine, a conjugate with iron scavenging ability, antioxidant properties and enhanced permeation in the HeLa cell model.

Direct determination of potentially toxic elements in rice by SS-GF AAS: development of methods and applications.

The development of methods for direct determinations of Al, Cd, and Pb in rice by SS-GF AAS is presented. Heating program optimization associated with the use of an adequate chemical modifier containing Pd + Mg allowed direct analysis against aqueous calibrations. The obtained LOD values were 114.0, 3.0, and 16.0 µg kg⁻¹ for Al, Cd, and Pb, respectively. Important parameters associated with a solid sampling analysis were investigated, such as minimum and maximum sample mass size and analyte segregation. Seventeen rice samples available in São Paulo City were analyzed, and all of them presented analyte mass fractions less than the maximum allowed by legislation. The influences of rice washing and the cooking procedure were also investigated. The washing procedure diminished the Al and Pb total mass fractions, indicating an exogenous grain contamination. The cooking procedure diminished the Cd total mass fraction. Rice cooking using an aluminum container did not cause a significant increase in the Al mass fraction in the rice, indicating no translocation of this element from container to food. In general, coarse rice presented higher levels of Al when compared to polished or parabolized rice.