Fractographic mirror law for brittle fracture of nonlinear elastic soft materials.

Mirror radius analysis of fractured surfaces is a powerful fractographic method for determining the cause of failure in linear elastic hard materials because it does not require prior loading information. However, mirror analysis for soft materials is lacking. In this study, we established a general mirror radius law for nonlinear elastic soft materials using highly deformable brittle hydrogels. The fracture stress and mirror radius follow a -1 power law, which differs from the -0.5 power law for linear elastic hard materials. The constant in the power law is related to the fracture energy of the material. This discovery provides insights into fracture mechanisms and leads the way for applying fractography to soft materials.

Engineering of an electrically charged hydrogel implanted into a traumatic brain injury model for stepwise neuronal tissue reconstruction.

Neural regeneration is extremely difficult to achieve. In traumatic brain injuries, the loss of brain parenchyma volume hinders neural regeneration. In this study, neuronal tissue engineering was performed by using electrically charged hydrogels composed of cationic and anionic monomers in a 1:1 ratio (C1A1 hydrogel), which served as an effective scaffold for the attachment of neural stem cells (NSCs). In the 3D environment of porous C1A1 hydrogels engineered by the cryogelation technique, NSCs differentiated into neuroglial cells. The C1A1 porous hydrogel was implanted into brain defects in a mouse traumatic damage model. The VEGF-immersed C1A1 porous hydrogel promoted host-derived vascular network formation together with the infiltration of macrophages/microglia and astrocytes into the gel. Furthermore, the stepwise transplantation of GFP-labeled NSCs supported differentiation towards glial and neuronal cells. Therefore, this two-step method for neural regeneration may become a new approach for therapeutic brain tissue reconstruction after brain damage in the future.

Mechanical Properties of a 3 Dimensional-Printed Transparent Flexible Resin Used for Vascular Model Simulation Compared with Those of Porcine Arteries.

PURPOSE: To develop a vascular intervention simulation model that replicates the characteristics of a human patient and to compare the mechanical properties of a 3-dimensional (3D)-printed transparent flexible resin with those of porcine arteries using the elastic modulus (E) and kinetic friction coefficient (µk). MATERIALS AND METHODS: Resin plates were created from a transparent flexible resin using a 3D printer. Porcine artery plates were prepared by excising the aorta. E values and the adhesive strengths of the resin and arterial surfaces toward a polyethylene plate, were measured with a tensile-compressive mechanical tester. Resin transparency was measured using an ultraviolet-visible light spectrometer. The µk value of the resin plate surface after applying silicone spray for 1-5 seconds and that of the artery were measured using a translational friction tester. RESULTS: E values differed significantly between the arteries and resin plates at each curing time (0.20 MPa ± 0.04 vs 8.53 MPa ± 2.37 for a curing time of 1 minute; P < .05). The resin was stiffer than the arteries, regardless of the curing times. The visible light transmittance and adhesive strength of the resin decreased as the curing time increased. The adhesive strength of the artery was the lowest. The µk value of the silicone-coated resin surface created by applying silicone for 2-3 seconds (thickness of the silicone layer, 1.6-2.0 µm) was comparable with that of the artery, indicating that the coating imparted a similar slippage to the resin as to the living artery. CONCLUSIONS: A transparent flexible resin is useful for creating a transparent and slippery vascular model for vascular intervention simulation.

Nanoscale TEM Imaging of Hydrogel Network Architecture.

In this work, the authors succeed in direct visualization of the network structure of synthetic hydrogels with transmission electron microscopy (TEM) by developing a novel staining and network fixation method. Such a direct visualization is not carried out because sample preparation and obtaining sufficient contrast are challenging for these soft materials. TEM images reveal robust heterogeneous network architectures at mesh size scale and defects at micro-scale. TEM images also reveal the presence of abundant dangling chains on the surface of the hydrogel network. The real space structural information provides a comprehensive perspective that links bulk properties with a nanoscale network structure, including fracture, adhesion, sliding friction, and lubrication. The presented method has the potential to advance the field.

ERK MAP Kinase Signaling Regulates RAR Signaling to Confer Retinoid Resistance on Breast Cancer Cells.

Retinoic acid (RA) and its synthetic derivatives, retinoids, have been established as promising anticancer agents based on their ability to regulate cell proliferation and survival. Clinical trials, however, have revealed that cancer cells often acquire resistance to retinoid therapy. Therefore, elucidation of underlying mechanisms of retinoid resistance has been considered key to developing more effective use of retinoids in cancer treatment. In this study, we show that constitutive activation of ERK MAP kinase signaling, which is often caused by oncogenic mutations in RAS or RAF genes, suppresses RA receptor (RAR) signaling in breast cancer cells. We show that activation of the ERK pathway suppresses, whereas its inhibition promotes, RA-induced transcriptional activation of RAR and the resultant upregulation of RAR-target genes in breast cancer cells. Importantly, ERK inhibition potentiates the tumor-suppressive activity of RA in breast cancer cells. Moreover, we also reveal that suppression of RAR signaling and activation of ERK signaling are associated with poor prognoses in breast cancer patients and represent hallmarks of specific subtypes of breast cancers, such as basal-like, HER2-enriched and luminal B. These results indicate that ERK-dependent suppression of RAR activity underlies retinoid resistance and is associated with cancer subtypes and patient prognosis in breast cancers.

Gluing blood into gel by electrostatic interaction using a water-soluble polymer as an embolic agent.

Liquid embolic agents are widely used for the endovascular embolization of vascular conditions. However, embolization based on phase transition is limited by the adhesion of the microcatheter to the embolic agent, use of an organic solvent, unintentional catheter retention, and other complications. By mimicking thrombus formation, a water-soluble polymer that rapidly glues blood into a gel without triggering coagulation was developed. The polymer, which consists of cationic and aromatic residues with adjacent sequences, shows electrostatic adhesion with negatively charged blood substances in a physiological environment, while common polycations cannot. Aqueous polymer solutions are injectable through clinical microcatheters and needles. The formed blood gel neither adhered to the catheter nor blocked the port. Postoperative computed tomography imaging showed that the polymer can block the rat femoral artery in vivo and remain at the injection site without nontarget embolization. This study provides an alternative for the development of waterborne embolic agents.

Force-triggered rapid microstructure growth on hydrogel surface for on-demand functions.

Living organisms share the ability to grow various microstructures on their surface to achieve functions. Here we present a force stamp method to grow microstructures on the surface of hydrogels based on a force-triggered polymerisation mechanism of double-network hydrogels. This method allows fast spatial modulation of the morphology and chemistry of the hydrogel surface within seconds for on-demand functions. We demonstrate the oriented growth of cells and directional transportation of water droplets on the engineered hydrogel surfaces. This force-triggered method to chemically engineer the hydrogel surfaces provides a new tool in addition to the conventional methods using light or heat, and will promote the wide application of hydrogels in various fields.

The mechanosensitive ion channel PIEZO1 is expressed in tendons and regulates physical performance.

How mechanical stress affects physical performance via tendons is not fully understood. Piezo1 is a mechanosensitive ion channel, and E756del PIEZO1 was recently found as a gain-of-function variant that is common in individuals of African descent. We generated tendon-specific knock-in mice using R2482H Piezo1, a mouse gain-of-function variant, and found that they had higher jumping abilities and faster running speeds than wild-type or muscle-specific knock-in mice. These phenotypes were associated with enhanced tendon anabolism via an increase in tendon-specific transcription factors, Mohawk and Scleraxis, but there was no evidence of changes in muscle. Biomechanical analysis showed that the tendons of R2482H Piezo1 mice were more compliant and stored more elastic energy, consistent with the enhancement of jumping ability. These phenotypes were replicated in mice with tendon-specific R2482H Piezo1 replacement after tendon maturation, indicating that PIEZO1 could be a target for promoting physical performance by enhancing function in mature tendon. The frequency of E756del PIEZO1 was higher in sprinters than in population-matched nonathletic controls in a small Jamaican cohort, suggesting a similar function in humans. Together, this human and mouse genetic and physiological evidence revealed a critical function of tendons in physical performance, which is tightly and robustly regulated by PIEZO1 in tenocytes.

Evaluation of biological responses to micro-particles derived from a double network hydrogel.

Double network hydrogels (DN gels) composed of poly (2-acrylamido-2-methyl propanesulfonic acid) (PAMPS) as the brittle first network and poly (N,N-dimethylacrylamide) (PDMA) as the ductile second network have been proven to be a substitute biomaterial for cartilage, with promising biocompatibility and low toxicity, when they are used as bulk materials. For their further applications as articular cartilages, it is essential to understand the biological reactions and adverse events that might be initiated by wear particles derived from these materials. In this study, we used DN gel micro-particles of sizes 4 µm and 10 µm generated by the grinding method to mimic wearing debris of DN gels. The biological responses to particles were then evaluated in a macrophage-cultured system and an inflammatory osteolysis murine model. Our results demonstrated that DN gel particles have the ability to activate macrophages and promote the expression of Tnf-α, both in vitro and in vivo. Furthermore, the implantation of these particles onto calvarial bone triggered local inflammation and bone loss in a mouse model. Our data reveal that the potential foreign body responses to the generated particles from artificial cartilage should receive more attention in artificial cartilage engineering with the goal of developing a safer biocompatible substitute.

Combination of ultra-purified stem cells with an in situ-forming bioresorbable gel enhances intervertebral disc regeneration.

BACKGROUND: Lumbar intervertebral disc (IVD) herniations are associated with significant disability. Discectomy is the conventional treatment option for IVD herniations but causes a defect in the IVD, which has low self-repair ability, thereby representing a risk of further IVD degeneration. An acellular, bioresorbable, and good manufacturing practice (GMP)-compliant in situ-forming gel, which corrects discectomy-associated IVD defects and prevents further IVD degeneration had been developed. However, this acellular matrix-based strategy has certain limitations, particularly in elderly patients, whose tissues have low self-repair ability. The aim of this study was to investigate the therapeutic efficacy of using a combination of newly-developed, ultra-purified, GMP-compliant, human bone marrow mesenchymal stem cells (rapidly expanding clones; RECs) and the gel for IVD regeneration after discectomy in a sheep model of severe IVD degeneration. METHODS: RECs and nucleus pulposus cells (NPCs) were co-cultured in the gel. In addition, RECs combined with the gel were implanted into IVDs following discectomy in sheep with degenerated IVDs. FINDINGS: Gene expression of NPC markers, growth factors, and extracellular matrix increased significantly in the co-culture compared to that in each mono-culture. The REC and gel combination enhanced IVD regeneration after discectomy (up to 24 weeks) in the severe IVD degeneration sheep model. INTERPRETATION: These findings demonstrate the translational potential of the combination of RECs with an in situ-forming gel for the treatment of herniations in degenerative human IVDs. FUNDING: Ministry of Education, Culture, Sports, Science, and Technology of Japan, Japan Agency for Medical Research and Development, and the Mochida Pharmaceutical Co., Ltd.

Hydroxyapatite-hybridized double-network hydrogel surface enhances differentiation of bone marrow-derived mesenchymal stem cells to osteogenic cells.

Recently, we have developed a hydroxyapatite (HAp)-hybridized double-network (DN) hydrogel (HAp/DN gel), which can robustly bond to the bone tissue in the living body. The purpose of this study is to clarify whether the HAp/DN gel surface can differentiate the bone marrow-derived mesenchymal stem cells (MSCs) to osteogenic cells. We used the MSCs which were harvested from the rabbit bone marrow and cultured on the polystyrene (PS) dish using the autogenous serum-supplemented medium. First, we confirmed the properties of MSCs by evaluating colony forming unit capacity, expression of MSC markers using flow cytometry, and multidifferential capacity. Secondly, polymerase chain reaction analysis demonstrated that the HAp/DN gel surface significantly enhanced mRNA expression of the eight osteogenic markers (TGF-ß1, BMP-2, Runx2, Col-1, ALP, OPN, BSP, and OCN) in the cultured MSCs at 7 days than the PS surfaces (p < 0.0001), while the DN gel and HAp surfaces provided no or only a slight effect on the expression of these markers except for Runx2. Additionally, the alkaline phosphatase activity was significantly higher in the cells cultured on the HAp/DN gel surface than in the other three material surfaces (p < 0.0001). Thirdly, when the HAp/DN gel plug was implanted into the rabbit bone marrow, MSC marker-positive cells were recruited in the tissue generated around the plug at 3 days, and Runx2 and OCN were highly expressed in these cells. In conclusion, this study demonstrated that the HAp/DN gel surface can differentiate the MSCs into osteogenic cells.

Ultrapurified Alginate Gel Containing Bone Marrow Aspirate Concentrate Enhances Cartilage and Bone Regeneration on Osteochondral Defects in a Rabbit Model.

BACKGROUND: Ultrapurified alginate (UPAL) gel implantation has been demonstrated as effective in cartilage repair for osteochondral defects; however, cell transplantation within UPAL gels would be required to treat larger defects. HYPOTHESIS: The combination of UPAL gel and bone marrow aspirate concentrate (BMAC) would enhance cartilage repair and subchondral bone repair for large osteochondral defects. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 104 osteochondral defects (1 defect per knee) of 52 rabbits were randomly divided into 4 groups (26 defects per group): defects without any treatment (Defect group), defects treated using UPAL gel alone (UPAL group), defects treated using UPAL gel containing allogenic bone marrow mesenchymal stromal cells (UPAL-MSC group), and defects treated using UPAL gel containing BMAC (UPAL-BMAC group). At 4 and 16 weeks postoperatively, macroscopic and histologic evaluations and measurements of repaired subchondral bone volumes of reparative tissues were performed. Collagen orientation and mechanical properties of the reparative tissue were assessed at 16 weeks. RESULTS: The defects in the UPAL-BMAC group were repaired with hyaline-like cartilage with well-organized collagen structures. The histologic scores at 4 weeks were significantly higher in the UPAL-BMAC group (16.9 ± 2.0) than in the Defect group (4.7 ± 1.9; P < .05), the UPAL group (10.0 ± 3.3; P < .05), and the UPAL-MSC group (12.2 ± 2.9; P < .05). At 16 weeks, the score in the UPAL-BMAC group (24.4 ± 1.7) was significantly higher than those in the Defect group (9.0 ± 3.7; P < .05), the UPAL group (14.2 ± 3.9; P < .05), and the UPAL-MSC group (16.3 ± 3.6; P < .05). At 4 and 16 weeks, the macroscopic evaluations were significantly superior in the UPAL-BMAC group compared with the other groups, and the values of repaired subchondral bone volumes in the UPAL-BMAC group were significantly higher than those in the Defect and UPAL groups. The mechanical properties of the reparative tissues were significantly better in the UPAL-BMAC group than in the other groups. CONCLUSION: The implantation of UPAL gel containing BMAC-enhanced hyaline-like cartilage repair and subchondral bone repair of osteochondral defects in a rabbit knee model. CLINICAL RELEVANCE: These data support the potential clinical application of 1-step treatment for large osteochondral defects using biomaterial implantation with cell transplantation.

Tough Double Network Hydrogel and Its Biomedical Applications.

Soft and wet hydrogels have many similarities to biological tissues, though their mechanical fragility had been one of the biggest obstacles in biomedical applications. Studies and developments in double network (DN) hydrogels have elucidated how to create tough gels universally based on sacrificial bond principles and opened a path for biomedical application of hydrogels in regenerative medicine and artificial soft connective tissues, such as cartilage, tendon, and ligament, which endure high tension and compression. This review explores a universal toughening mechanism for and biomedical studies of DN hydrogels. Moreover, because the term sacrificial bonds has been mentioned often in studies of bone tissues, consisting of biomacromolecules and biominerals, recent studies of gel-biomineral composites to understand early-stage osteogenesis and to simulate bony sacrificial bonds are also summarized.

Bone Marrow Aspirate Concentrate Combined with in Situ Forming Bioresorbable Gel Enhances Intervertebral Disc Regeneration in Rabbits.

BACKGROUND: The current surgical procedure of choice for intervertebral disc (IVD) herniation is discectomy, which induces postoperative IVD degeneration. Thus, cell-based therapies, as a 1-step simple procedure, are desired because of the poor capacity of IVDs for self-repair. The aim of this study was to investigate the repair efficacy of ultra-purified alginate (UPAL) gels containing bone marrow aspirate concentrate (BMAC) for the treatment of discectomy-associated IVD degeneration in rabbits. METHODS: The mechanical properties of 3 types of gels-UPAL, UPAL containing bone marrow-derived mesenchymal stem cells (BMSCs), and UPAL containing BMAC-were evaluated. Forty rabbits were assigned to 5 groups: intact control, discectomy (to make the cavity), UPAL (implantation of the UPAL gel after discectomy), BMSCs-UPAL (implantation of a combination of autogenic BMSCs and UPAL gel after discectomy), and BMAC-UPAL (implantation of a combination of BMAC and UPAL gel after discectomy). The gels were implanted at 4 weeks after induction of IVD degeneration. At 4 and 12 weeks, magnetic resonance imaging (MRI) as well as histological and immunohistochemical analyses were performed to analyze IVD degeneration qualitatively and the viability of the implanted cells. RESULTS: There was no significant difference among the 3 types of gels in terms of the results of unconfined compression tests. The implanted cells survived for 12 weeks. The histological grades of the BMSCs-UPAL (mean and standard deviation, 2.50 ± 0.53; p < 0.001) and BMAC-UPAL (2.75 ± 0.64, p = 0.001) showed them to be more effective in preventing degeneration than UPAL gel alone (3.63 ± 0.52). The effectiveness of BMAC-UPAL was not significantly different from that of BMSCs-UPAL, except with respect to type-II collagen synthesis. CONCLUSIONS: BMAC-UPAL significantly enhanced the repair of IVD defects created by discectomy. This approach could be an effective therapeutic strategy owing to its simplicity and cost-effectiveness compared with cell therapy using culture-expanded BMSCs. CLINICAL RELEVANCE: Local administration of the BMAC combined with UPAL gel could be an effective therapeutic strategy to enhance IVD repair after discectomy.

Isotope Microscopic Observation of Osteogenesis Process Forming Robust Bonding of Double Network Hydrogel to Bone.

Tough double network (DN) hydrogels are promising substitutes of soft supporting tissues such as cartilage and ligaments. For such applications, it is indispensable to robustly fix the hydrogels to bones with medically feasible methods. Recently, robustly bonding the DN hydrogels to defected bones of rabbits in vivo has been proved successful. The low crystalline hydroxyapatite (HAp) of calcium-phosphate-hydroxide salt coated on the surface layer of the DN hydrogels induced spontaneous osteogenesis penetrating into the semi-permeable hydrogels to form a gel/bone composite layer. In this work, the 44 Ca isotope-doped HAp/DN hydrogel is implanted in a defect of rabbit femoral bone and the dynamic osteogenesis process at the gel/bone interface is analyzed by tracing the calcium isotope ratio using isotope microscopy. The synthetic HAp hybridized on the surface layer of DN gel dissolves rapidly in the first two weeks by inflammation, and then the immature bone with a gradient structure starts to form in the gel region, reutilizing the dissolved Ca ions. These results reveal, for the first time, that synthetic HAp is reutilized for osteogenesis. These facts help to understand the lifetime of bone absorbable materials and to elucidate the mechanism of spontaneous, non-toxic, but strong fixation of hydrogels to bones.

Chitin-Based Double-Network Hydrogel as Potential Superficial Soft-Tissue-Repairing Materials.

Chitin is a biopolymer, which has been proven to be a biomedical material candidate, yet the weak mechanical properties seriously limit their potentials. In this work, a chitin-based double-network (DN) hydrogel has been designed as a potential superficial repairing material. The hydrogel was synthesized through a double-network (DN) strategy composing hybrid regenerated chitin nanofiber (RCN)-poly (ethylene glycol diglycidyl ether) (PEGDE) as the first network and polyacrylamide (PAAm) as the second network. The hybrid RCN-PEGDE/PAAm DN hydrogel was strong and tough, possessing Young's modulus (elasticity) E 0.097 ± 0.020 MPa, fracture stress σf 0.449 ± 0.025 MPa, and work of fracture Wf 5.75 ± 0.35 MJ·m-3. The obtained DN hydrogel was strong enough for surgical requirements in the usage of soft tissue scaffolds. In addition, chitin endowed the DN hydrogel with good bacterial resistance and accelerated fibroblast proliferation, which increased the NIH3T3 cell number by nearly five times within 3 days. Subcutaneous implantation studies showed that the DN hydrogel did not induce inflammation after 4 weeks, suggesting a good biosafety in vivo. These results indicated that the hybrid RCN-PEGDE/PAAm DN hydrogel had great prospect as a rapid soft-tissue-repairing material.

Hydrogels toughened by biominerals providing energy-dissipative sacrificial bonds.

Inspired by bone tissues, we mineralized low crystalline hydroxyapatite (HAp) particles in double network (DN) hydrogels, and we observed that the HAp minerals toughen the gels. The contribution of dissipated energy from HAp minerals was over 500% higher than that from the polymer during tensile deformation. We elucidated that the amorphous parts in the HAp minerals break at deformation, acting as energy-dissipative sacrificial bonds. This result implies that not only brittle polymer networks but also minerals can provide sacrificial bonds to toughen soft materials.

Surface charge dominated protein absorption on hydrogels.

Soft tissue engineering requires antifouling materials that are biocompatible and mechanically flexible. Conventional hydrogels containing more than 70 wt% water are thus promising antifouling material candidates. However, some hydrogels are difficult to apply in internal body organs because of undesirable protein absorption on their surfaces. Due to the lack of an effective method for observing the true charge densities of hydrogels, the reason why electrostatic interactions dominate protein absorption behavior remains unclear. In this work, we adopt the microelectrode technique (MET) to study the electrical potentials of hydrogels with negative, positive, and neutral potentials and demonstrate the protein absorption behaviors on those hydrogels. The results show that MET is an effective method to obtain the surface charge densities of various hydrogels. Furthermore, the amounts of absorbed proteins on the gels were quantified with respect to the charge densities of the hydrogels. The results indicate that electrostatic absorption is quantitatively dominated by a combination of hydrogel charge density and overall protein charge. Based on the knowledge obtained in this work, the effects of hydrogel surface charges on protein absorption can be better understood. Thus, the results are expected to promote the application of hydrogels in tissue engineering.

Instant Thermal Switching from Soft Hydrogel to Rigid Plastics Inspired by Thermophile Proteins.

Proteins of thermophiles are thermally stable in a high-temperature environment, adopting a strategy of enhancing the electrostatic interaction in hydrophobic media at high temperature. Herein, inspired by the molecular mechanism of thermally stable proteins, the synthesis of novel polymer materials that undergo ultrarapid, isochoric, and reversible switching from soft hydrogels to rigid plastics at elevated temperature is reported. The materials are developed from versatile, inexpensive, and nontoxic poly(acrylic acid) hydrogels containing calcium acetate. By the cooperative effects of hydrophobic interaction and ionic interaction, the hydrogels undergo significant spinodal decomposition and subsequent rubbery-to-glassy transition when heated to an elevated temperature. As a result, the gels exhibit super-rapid and significant hikes in stiffness, strength, and toughness by up to 1800-, 80-, and 20-folds, respectively, when the temperature is raised from 25 to 70 °C, while the volumes of the gels are almost unchanged. As a potential application, the performance of the materials as athletic protective gear is demonstrated. This work provides a pathway for developing thermally stiffened materials and may significantly broaden the scope of polymer applications.

Osteochondral Autograft Transplantation Technique Augmented by an Ultrapurified Alginate Gel Enhances Osteochondral Repair in a Rabbit Model.

BACKGROUND: One of the most important limitations of osteochondral autograft transplantation (OAT) is the adverse effect on donor sites in the knee. To decrease the number and/or size of osteochondral defects, we devised a method with biomaterial implantation after OAT. HYPOTHESIS: OAT augmented by ultrapurified alginate (UPAL) gel enhances cartilage repair capacity. STUDY DESIGN: Controlled laboratory study. METHODS: Seventy-five osteochondral defects in rabbits were divided into 3 groups: osteochondral defects with OAT alone, defects with OAT augmented by UPAL gel (combined group), and defects without intervention as controls. Macroscopic and histological evaluations of the reparative tissues were performed at 4 and 12 weeks postoperatively. Histological evaluation of graft cartilage degradation was also performed. To evaluate the effects of UPAL gel on graft healing, repaired bone volumes and osseointegration of the graft were evaluated. Collagen orientation and the mechanical properties of the reparative tissue and graft cartilage were also evaluated qualitatively. RESULTS: The macroscopic and histological evaluations of the combined group were significantly superior to the other groups at 12 weeks postoperatively. Regarding degenerative change of the graft, the histological scores of the combined group were significantly higher than those of the OAT-alone group. The values of repaired subchondral bone volumes and osseointegration of the graft were almost identical in both groups. Collagen orientation and the mechanical properties of the reparative tissue and graft cartilage were significantly better in the combined group than in the other groups. CONCLUSION: Administration of UPAL gel in OAT enhanced cartilage repair and protected graft cartilage without inhibiting subchondral bone repair and graft survival. CLINICAL RELEVANCE: OAT augmented by UPAL gel decreases the number and/or size of osteochondral grafts, minimizing the risk of donor site morbidity. This combination technique has the potential to improve clinical outcomes and expand the surgical indications for OAT.