Development of a rapid screening method to determine primary aromatic amines in kitchen utensils using direct analysis in real time mass spectrometry (DART-MS).

Primary aromatic amines (PAAs) are a group of substances with undesirable health effects, that are used in a variety of commercial products. Several recent studies, using a number of screening and confirmatory methods, have reported the migration of PAAs from some kitchen utensils into acetic acid 3% (w/v). Many of these methods require significant sample preparation, therefore the aim of this work was to determine if direct analysis in real time mass spectrometry (DART-MS) could be utilised as a rapid screening tool for the determination of PAAs in kitchen utensils. DART-MS results from direct analysis of the utensil have been compared with results of PAA migration by ultra high performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) method. The UPLC-MS/MS method had excellent linearity, appropriate sensitivity (LOD ≤ 1.5 µg L(-1); LOQ ≤ 4.5 µg L(-1)), repeatability from 2.4 to 13.2% and acceptable recoveries. DART-MS results were in good agreement with UPLC-MS/MS data, with 100% of non-compliant (PAA positive) samples successfully identified by DART-MS.

Migration of perfluoroalkyl acids from food packaging to food simulants.

A broad range of fluorochemicals is used to impart oil and water barrier properties to paper and paperboard food packaging. Many of the fluorochemicals are applied to paper and paperboard as complex mixtures containing reaction products and by-products and unreacted starting materials. This work primarily focussed on the determination of seven perfluorocarboxylic acids (PFCAs) in two commercially available food contact papers: a di-perfluoro-alkyloxy-amino-acid and a perfluoroalkyl phosphate surfactant. In addition, the migration of the PFCAs into five food simulants from two commercial packages was evaluated. All seven PFCAs were detected in the range of 700-2220 µg kg⁻¹ of paper, while three perfluoroalkyl sulphonates were under the LOD. Results from migration tests showed that migration depends on paper characteristics, time and food simulant. The percentage of migration after 10 days at 40°C ranged from 4.8% to 100% for the two papers and different food simulants.

Assessing direct analysis in real-time-mass spectrometry (DART-MS) for the rapid identification of additives in food packaging.

The ambient ionization technique direct analysis in real time (DART) was characterized and evaluated for the screening of food packaging for the presence of packaging additives using a benchtop mass spectrometer (MS). Approximate optimum conditions were determined for 13 common food-packaging additives, including plasticizers, anti-oxidants, colorants, grease-proofers, and ultraviolet light stabilizers. Method sensitivity and linearity were evaluated using solutions and characterized polymer samples. Additionally, the response of a model additive (di-ethyl-hexyl-phthalate) was examined across a range of sample positions, DART, and MS conditions (temperature, voltage and helium flow). Under optimal conditions, molecular ion (M+H+) was the major ion for most additives. Additive responses were highly sensitive to sample and DART source orientation, as well as to DART flow rates, temperatures, and MS inlet voltages, respectively. DART-MS response was neither consistently linear nor quantitative in this setting, and sensitivity varied by additive. All additives studied were rapidly identified in multiple food-packaging materials by DART-MS/MS, suggesting this technique can be used to screen food packaging rapidly. However, method sensitivity and quantitation requires further study and improvement.

Determination of 2,6-diisopropylnaphthalene (DIPN) and n-dibutylphthalate (DBP) in food and paper packaging materials from US marketplaces.

A gas chromatography-ion-trap tandem mass spectrometry procedure was developed for the determination of 2,6-diisopropylnaphthalene (DIPN) and n-dibutylphthalate (DBP) in domestic and imported paper packages and food sold in US marketplaces. The procedure involved ultrasonic extraction with dichloromethane, followed by analysis with the gas chromatography-ion-trap tandem mass spectrometry. Calibration curves for DIPN and DBP were achieved with concentrations ranging from 0.01 to 10 microg ml(-1) and the corresponding r(2) values were 0.9976 and 0.9956, respectively. In most of the fortified samples the recoveries were higher than 80% with a relative standard deviation (RSD) <10%. Using this procedure, it was found that less than 20% of the tested domestic packages and more than 60% of the tested imported food packages contained both DIPN and DBP. The concentrations of DIPN and DBP ranged from 0.09 to 20 mg kg(-1) and 0.14 to 55 mg kg(-1), respectively, with most of the DINP and DBP levels lower than 20 mg kg(-1). DIPN was not detected (<0.01 mg kg(-1)) in 41 food samples and DBP was only detected in two domestic and four imported food samples with concentrations ranging from <0.01 to 0.81 mg kg(-1).

Rapid quantitative and qualitative confirmatory method for the determination of monofluoroacetic acid in foods by liquid chromatography-mass spectrometry.

A rapid quantitative method and a qualitative confirmatory method for the determination of monofluoroacetic acid (MFA) in complex food matrices are presented. The quantitative method utilizes a water extraction, solid phase extraction clean-up and liquid chromatography-mass spectrometry (LC-MS) for determination of MFA. This method showed a high degree of specificity, detecting MFA in all of the spiked samples, while none of the unfortified samples tested positive for MFA. Spike recoveries were high in all matrices analyzed, varying from 85 to 110%, and comparable at low (2mg/L) and high (20mg/L) spiking levels. Repeatability tests at the low spiking levels yielded RSDs of less than 5% for all matrices analyzed. The qualitative confirmatory method developed is conceptually different from the quantitative method, ensuring that both methods would not be subject to the same interferences. The method uses the formation of the hydrazide of MFA through derivatization with 2-nitrophenylhydrazine. This derivatization is well established for the determination of carboxylic acids, but this is the first application to the determination of MFA. The derivatization yield was matrix dependent, however the limit of detection (LOD) (0.8microg/L) was sufficient to confirm the presence of MFA in all spiked matrices. Repeatability tests at the low spiking levels yielded RSDs of approximately 7% for all matrices analyzed.