Interfacial Disordering and Heterojunction Enabling Fast Proton Conduction.

The interfacial disorder is a general method to change the metal-oxygen compatibility and carrier density of heterostructure materials for ionic transport modulation. Herein, to enable high proton conduction, a semiconductor heterostructure based on spinel ZnFe2 O4 (ZFO) and fluorite CeO2 is developed and investigated in terms of structural characterization, first principle calculation, and electrochemical performance. Particular attention is paid to the interfacial disordering and heterojunction effects of the material. Results show that the heterostructure induces a disordered oxygen region at the hetero-interface of ZFO-CeO2 by dislocating oxygen atoms, leading to fast proton transport. As a result, the ZFO-CeO2 exhibits a high proton conductivity of 0.21 S cm-1 and promising fuel cell power output of 1070 mW cm-2 at 510 °C. Based upon these findings, a new mechanism is proposed by focusing on the change of O-O bond length to interpret the diffusion and acceleration of protons in ZFO-CeO2 on the basis of the Grotthuss mechanism. This study provides a new strategy to customize semiconductor heterostructure to enable fast proton conduction.

High-performing and stable semiconductor yttrium-doped gadolinium electrolyte for low-temperature solid oxide fuel cells.

High-performing electrolytes at low operating temperatures have become an inevitable trend in the development of low-temperature solid oxide fuel cells (LT-SOFCs). Such electrolytes have drawn significant attention due to their appeal for high performance. Herein, we propose a new material by doping Y3+ into Gd2O3 for LT-SOFC electrolyte use. The prepared material was characterized in terms of crystal structure, surface, and interface properties, followed by its application in LT-SOFCs. YDG delivered promising SOFC performance with a power density of 1046 mW cm-2 at 550 °C along with high ionic conductivity of 0.19 S cm-1. Moreover, impedance spectra revealed that YDG exhibited the least ohmic resistance of 0.06-0.09 Ω cm2 at 550-460 °C. Furthermore, stable operation for 60 h demonstrated the chemical stability of the material in reduced temperature environments. Density function theory was also applied to analyze the electronic band structure and density of states of the synthesized sample. Our findings thus certify that YDG as a high-performing electrolyte at low operating temperatures.

Tunable magneto-optical and interfacial defects of Nd and Cr-doped bismuth ferrite nanoparticles for microwave absorber applications.

Tunable microwave absorption characteristics are highly desirable for industrial applications such as antenna, absorber, and biomedical diagnostics. Here, we report BiNdxCrxFe1-2xO3 (x = 0, 0.05, 0.10, 0.15) nanoparticles (NPs) with electromagnetic matching, which exhibit tunable magneto-optical and feasible microwave absorption characteristics for microwave absorber applications. The experimental results and theoretical calculations demonstrate the original bismuth ferrite (BFO) crystal structure, while Nd and Cr injection in the BFO structure may cause to minimize dielectric losses and enhance magnetization by producing interfacial defects in the spinel structure. Nd and Cr co-doping plays a key role in ordering the BFO crystal structure, resulting in improved microwave absorption characteristics. The BiNd0.10Cr0.10Fe1.8O3 (BNCF2) sample exhibits a remarkable reflection loss (RL) of -37.7 dB with a 3-mm thickness in the 10.15 GHz-10.30 GHz frequency region. Therefore, Nd and Cr doping in BFO nanoparticles opens a new pathway to construct highly efficient BFO-based materials for tunable frequency, stealth, and microwave absorber applications.

In-house validation of accelerated solvent extraction-gas chromatography-mass spectrometry for the determination of bound 3- and 2-monochloropropanediols (MCPD) and glycidol in food products.

The study aimed to establish the detection method for bound 3-, 2-MCPD, and glycidol using accelerated solvent extraction (ASE) and gas chromatography mass spectrometry (GC-MS). The ASE was modified for reduced solvent volume and process time to extract lipid from the chocolate spread, infant formula, potato chips, and sweetened creamer. The solvent selected for ASE was a mixture of iso-hexane and acetone at 100°C with the lipid and analyte recovery ranging from 96.9% to 98.6% and 84.1% to 107.5%, respectively. The derivatisation of analytes was adopted from the AOCS method Cd29a-13 for GC-MS analysis. The results showed that the coefficient of determination (R2) of all analytes was >0.99. The limit of detection (LOD) was 0.1 mg kg-1 expressed in lipid basis for both bound 3- and 2-MCPD and 0.2 mg kg-1 expressed in lipid basis for bound glycidol. The limit of quantitation (LOQ) was 0.3 mg kg-1 expressed in lipid basis for both bound 3- and 2-MCPD and 0.6 mg kg-1 expressed in lipid basis for bound glycidol. A blank spiked with 3-monochloropropanediols fatty acid esters (MCPDE) and 2-MCPDE (0.3, 2.1, and 7.2 mg kg-1) and glycidol esters (0.6, 4.7, and 16.6 mg kg-1) were chosen for accuracy and precision tests. The recoveries were 91.7% to 105.9%. Both repeatability and within-laboratory reproducibility of the analysis were within the acceptable level of precision ranging from 1.7% to 16%. This is the first time that a full validation procedure extending to both accuracy and precision tests has been carried out for sweetened creamer and chocolate spread. Overall, the combined protocol of ASE and AOCS Cd29a-13 was successfully validated for both solid and liquid food samples with lipid content from 10% to 30%.

Comparative study of the application of jasmonic acid and pesticide in chilli: effects on physiological activities, yield and viruses control / Estudo comparativo da aplicação de ácido jasmônico e pesticida em pimenteira: efeito nas atividades fisiológicas, produção e controle de viroses

The excessive application of pesticides for agricultural production has raised quite some concern about environmental safety and sustainability. To reduce environmental impact of pesticide overuse, there is an increasing interest in using different elicitors including Jasmonic acid (JA) to induce resistance against pathogen and insect in crop. Chilli (Capsicum annuum L.), which is an important vegeTable cum spice crop around the world. The aims of this study were to compare the effectiveness of Jasmonic acid on growth, Phyto-physiological responses, yield and viruses control in chilli plant. It was evaluated the effectiveness of single spray of JA (JA1), double spray of JA (JA2), conventional pesticide (Malathion 50%) and without any of those or control. The experimental results showed that pesticide-treated plants perform much better at early growth stages and become less competitive to JA2 treatment at maturity. Double spray of jasmonic acid showed less stress symptoms in different antioxidant enzymes activities (GPX, APX and CAT), reduce percentage of disease incidence and severity as well as improve growth and yielding characters of chilli plant. Therefore application of Jasmonic acid in chilli could be a possible alternative of pesticide application and its two times exogenous spray (0.5mM) is most effective.

A aplicação excessive de pesticidas na produção agrícola tem provocado algumas alterações na segurança ambiental e na sustentabilidade. Para reduzir este impacto ambiental aumentou o interesse no uso de elicitores incluindo o ácido Jasmônico (AJ) para induzir resistência contra os patógenos e insetos na cultura da pimenteira (Capsicum annum L.), a qual é uma importante hortaliça ou planta olerícola ao redor do mundo. Neste estudo foi comparada a eficácia do ácido Jasmônico no crescimento, resposta fisiológica, produção e controle de viroses na pimenteira. Foi avaliada uma simples aplicação (AJ1), duas aplicações (AJ2), inseticida malathion 50 % e uma testemunha (controle). Os resultados experimentais demonstraram uma redução nos sintomas de doenças viróticas pela atividade das enzimas anti oxidantes (GPX, APX e CAT), que reduziram a porcentagem da incidência e severidade das mesmas e promoveram o crescimento e melhoram os caracteres da produtividade da pimenteira. Portanto, a aplicação do ácido jsmônico em pimenteira pode ser uma alternativa para reduzir o uso de inseticidas e sua aplicação em duas vezes durante o ciclo (0,5 mM) foi mais eficiência.

Introducing uncertainty analysis of nucleation and crystal growth models in Process Analytical Technology (PAT) system design of crystallization processes.

This paper presents the application of uncertainty and sensitivity analysis as part of a systematic model-based process monitoring and control (PAT) system design framework for crystallization processes. For the uncertainty analysis, the Monte Carlo procedure is used to propagate input uncertainty, while for sensitivity analysis, global methods including the standardized regression coefficients (SRC) and Morris screening are used to identify the most significant parameters. The potassium dihydrogen phosphate (KDP) crystallization process is used as a case study, both in open-loop and closed-loop operation. In the uncertainty analysis, the impact on the predicted output of uncertain parameters related to the nucleation and the crystal growth model has been investigated for both a one- and two-dimensional crystal size distribution (CSD). The open-loop results show that the input uncertainties lead to significant uncertainties on the CSD, with appearance of a secondary peak due to secondary nucleation for both cases. The sensitivity analysis indicated that the most important parameters affecting the CSDs are nucleation order and growth order constants. In the proposed PAT system design (closed-loop), the target CSD variability was successfully reduced compared to the open-loop case, also when considering uncertainty in nucleation and crystal growth model parameters. The latter forms a strong indication of the robustness of the proposed PAT system design in achieving the target CSD and encourages its transfer to full-scale implementation.