Narrative review of occupational exposures and noncommunicable diseases.

OBJECTIVE: Within the scope of the Exposome Project for Health and Occupational Research on applying the exposome concept to working life health, we aimed to provide a broad overview of the status of knowledge on occupational exposures and associated health effects across multiple noncommunicable diseases (NCDs) to help inform research priorities. METHODS: We conducted a narrative review of occupational risk factors that can be considered to have "consistent evidence for an association," or where there is "limited/inadequate evidence for an association" for 6 NCD groups: nonmalignant respiratory diseases; neurodegenerative diseases; cardiovascular/metabolic diseases; mental disorders; musculoskeletal diseases; and cancer. The assessment was done in expert sessions, primarily based on systematic reviews, supplemented with narrative reviews, reports, and original studies. Subsequently, knowledge gaps were identified, e.g. based on missing information on exposure-response relationships, gender differences, critical time-windows, interactions, and inadequate study quality. RESULTS: We identified over 200 occupational exposures with consistent or limited/inadequate evidence for associations with one or more of 60+ NCDs. Various exposures were identified as possible risk factors for multiple outcomes. Examples are diesel engine exhaust and cadmium, with consistent evidence for lung cancer, but limited/inadequate evidence for other cancer sites, respiratory, neurodegenerative, and cardiovascular diseases. Other examples are physically heavy work, shift work, and decision latitude/job control. For associations with limited/inadequate evidence, new studies are needed to confirm the association. For risk factors with consistent evidence, improvements in study design, exposure assessment, and case definition could lead to a better understanding of the association and help inform health-based threshold levels. CONCLUSIONS: By providing an overview of knowledge gaps in the associations between occupational exposures and their health effects, our narrative review will help setting priorities in occupational health research. Future epidemiological studies should prioritize to include large sample sizes, assess exposures prior to disease onset, and quantify exposures. Potential sources of biases and confounding need to be identified and accounted for in both original studies and systematic reviews.

Characterization of particle exposure during tunnel excavation by tunnel boring machines.

Tunnel boring machines (TBMs) are used to excavate tunnels in a manner where the rock is constantly penetrated with rotating cutter heads. Fine particles of the rock minerals are thereby generated. Workers on and in the vicinity of the TBM are exposed to particulate matter (PM) consisting of bedrock minerals including α-quartz. Exposure to respirable α-quartz remains a concern because of the respiratory diseases associated with this exposure. The particle size distribution of PM and α-quartz is of special importance because of its influence on adverse health effects, monitoring and control strategies as well as accurate quantification of α-quartz concentrations. The major aim of our study was therefore to investigate the particle size distribution of airborne PM and α-quartz generated during tunnel excavation using TBMs in an area dominated by gneiss, a metamorphic type of rock. Sioutas cascade impactors were used to collect personal samples on 3 separate days. The impactor fractionates the dust in 5 size fractions, from 10 µm down to below 0.25 µm. The filters were weighted, and the α-quartz concentrations were quantified using X-ray diffraction (XRD) analysis and the NIOSH 7500 method on the 5 size fractions. Other minerals were determined using Rietveld refinement XRD analysis. The size and elemental composition of individual particles were investigated by scanning electron microscopy. The majority of PM mass was collected on the first 3 stages (aerodynamic diameter = 10 to 0.5 µm) of the Sioutas cascade impactor. No observable differences were found for the size distribution of the collected PM and α-quartz for the 3 sampling days nor the various work tasks. However, the α-quartz proportion varied for the 3 sampling days demonstrating a dependence on geology. The collected α-quartz consisted of more particles with sizes below 1 µm than the calibration material, which most likely affected the accuracy of the measured respirable α-quartz concentrations. This potential systematic error is important to keep in mind when analyzing α-quartz from occupational samples. Knowledge of the particle size distribution is also important for control measures, which should target particle sizes that efficiently capture the respirable α-quartz concentration.

Job function as determinant of clinker exposure at workplaces during cement production.

OBJECTIVES: In the cement production industry, exposure to airborne particulate matter is associated with a decline in lung function and increased airway symptoms. Exposure to clinker-the major constituent of cement and supposedly the cause of the observed adverse health effects-was determined recently in 15 cement production plants located in 8 different countries (Estonia, Greece, Italy, Norway, Sweden, Switzerland, Spain, Turkey). It was shown that the median clinker abundance in the thoracic fraction varied between approximately 20% and 70% for individual plants. The present study complements the previous work by investigating the significance of job function as a determinant of clinker exposure. METHODS: The elemental composition (water and acid-soluble fractions separately) of 1,227 personal thoracic workplace samples was analyzed by positive matrix factorization (PMF) to determine the contribution of different sources to the composition of airborne particulate matter and to quantify the clinker content. RESULTS: Median thoracic mass air concentrations varied for individual job functions between 0.094 and 12 mg/m3 (estimated separately for different plants). The PMF 5-factor solution yielded median relative clinker abundances in the personal thoracic samples between 7.6% and 81% for individual job functions. Thoracic clinker air concentrations are highest for cleaning, production, and maintenance work, and lowest for administration and other work. Foremen and laboratory personnel show intermediate exposure levels. The plant was found to have a much higher contribution to the total variance of the thoracic clinker air concentrations than the job function. Thoracic clinker air concentrations (medians between 0.01 and 5.5 mg/m3) are strongly correlated with the thoracic mass air concentrations and to a lesser extent with the relative clinker abundance in an aerosol sample. CONCLUSIONS: Job function is an important predictor of exposure to clinker in the cement production industry. As clinker is suspected to be the causal agent for the observed adverse health effects among cement production workers, the clinker air concentration may be a better exposure metric than thoracic air mass concentration despite the strong correlation between the two. Reduction strategies should focus on the most exposed job categories cleaning, production, and maintenance work.

Occupational exposures of firefighting and urinary tract cancer risk among men in the Norwegian Fire Departments Cohort.

OBJECTIVES: Increased risks of bladder cancer and mesothelioma were the strongest evidence for the recent reclassification of firefighting as carcinogenic (Group 1) by the International Agency for Research on Cancer. Our study aim was to develop indicators for specific firefighting exposures and examine associations with urinary tract cancer (UTC), including bladder cancer. METHODS: We developed indicators for exposure from employment at a fire department or in firefighting jobs, to fire and smoke, and to diesel exhaust for men in the Norwegian Fire Departments Cohort (n=4250). Incident UTC cases were obtained from the Cancer Registry of Norway (1960-2021). Poisson regression was used to estimate incidence rate ratios (IRR) with cumulative exposures grouped into tertiles (reference: lowest exposed tertile) with 0-year, 10-year and 15-year lagging of exposures. RESULTS: During 125 090 person-years of follow-up, there were 76 cases of UTC. IRRs were mostly non-significantly increased in the middle tertile and at or below 1 in the highest tertile for total duration of employment, number of fires attended and fire exposure score with and without lags. In the middle tertile for diesel exhaust exposure, UTC risk was elevated over twofold with 10-year (IRR 2.27, 95% CI 1.22 to 4.20) and 15- year (2.21, 1.18 to 4.16) lags, and near 1 in the highest tertile. Findings for bladder cancer were similar to those for UTC. CONCLUSIONS: Dose-response associations between the exposure indicators and UTC were not observed. Future studies using the indicators with more cases are needed.

Content of clinker and other materials in personal thoracic aerosol samples from cement plants estimated by scanning electron microscopy and energy-dispersive X-ray microanalysis.

OBJECTIVES: To estimate the composition and exposure to clinker and other specific components in personal thoracic dust samples of cement production workers. METHODS: A procedure for the classification of airborne particles in cement production plants was developed based on classification trees. For this purpose, the chemical compositions of 27,217 particles in 29 material samples (clinker, limestone, gypsum, clay, quartz, bauxite, iron source, coal fly ash, and coal) were determined automatically by scanning electron microscopy (SEM) and energy-dispersive X-ray microanalysis (EDX). The concentrations of the major elements in cement (calcium, aluminium, silicon, iron, and sulphur) were used for the classifications. The split criteria of the classification trees obtained in the material samples were used to classify 44,176 particles in 34 personal thoracic aerosol samples. The contents of clinker and other materials were estimated, and the clinker contents were analysed statistically for differences between job types and job tasks. RESULTS: Between 64% and 88% of the particles from material samples were classified as actual materials. The material types with variable composition (clay, coal fly ash, and coal) were classified with the lowest consistency (64% to 67%), while materials with a more limited compositional variation (clinker, gypsum, and quartz) were classified more consistently (76% to 85%). The arithmetic mean (AM) of the clinker content in personal samples was 62.1%, the median was 55.3%, and 95% confidence interval (CI) was 42.6% to 68.1%. No significant differences were observed between job types. However, the clinker content in samples when workers handled materials with high clinker content was significantly higher than when materials with lower clinker content were handled, 85% versus 65% (P = 0.02). The limestone content was AM 14.8%, median 13.2% (95% CI 5.5 to 20.9), whereas the other materials were present with relative abundances of median ≤ 6.4%. DISCUSSION: Automated particle analysis by SEM-EDX followed by classification tree analysis quantified clinker with fairly high consistency when evaluated together with raw materials that are expected to be airborne in cement production plants. The clinker proportions for job types were similar. Tasks a priori ranked by assumed clinker content were significantly different and according to expectations, which supports the validity of the chosen methodology. CONCLUSIONS: The composition of personal samples of mineral aerosols in the cement production industry could be estimated by automated single particle analysis with SEM-EDX and classification by a classification tree procedure. Clinker was the major component in the thoracic aerosol that cement production workers were exposed to. Differences between job types were relatively small and not significant. The clinker content from tasks was in agreement with assumptions.

Exposure to pesticides and risk of Hodgkin lymphoma in an international consortium of agricultural cohorts (AGRICOH).

PURPOSE: Some pesticides may increase the risk of certain lymphoid malignancies, but few studies have examined Hodgkin lymphoma (HL). In this exploratory study, we examined associations between agricultural use of 22 individual active ingredients and 13 chemical groups and HL incidence. METHODS: We used data from three agricultural cohorts participating in the AGRICOH consortium: the French Agriculture and Cancer Cohort (2005-2009), Cancer in the Norwegian Agricultural Population (1993-2011), and the US Agricultural Health Study (1993-2011). Lifetime pesticide use was estimated from crop-exposure matrices or self-report. Cohort-specific covariate-adjusted overall and age-specific (< 40 or ≥ 40 years) hazard ratios (HRs) and 95% confidence intervals (CIs) were estimated using Cox regression and combined using random effects meta-analysis. RESULTS: Among 316 270 farmers (75% male) accumulating 3 574 815 person-years at risk, 91 incident cases of HL occurred. We did not observe statistically significant associations for any of the active ingredients or chemical groups studied. The highest risks of HL overall were observed for the pyrethroids deltamethrin (meta-HR = 1.86, 95% CI 0.76-4.52) and esfenvalerate (1.86, 0.78-4.43), and inverse associations of similar magnitude were observed for parathion and glyphosate. Risk of HL at ≥ 40 years of age was highest for ever-use of dicamba (2.04, 0.93-4.50) and lowest for glyphosate (0.46, 0.20-1.07). CONCLUSION: We report the largest prospective investigation of these associations. Nonetheless, low statistical power, a mixture of histological subtypes and a lack of information on tumour EBV status complicate the interpretability of the results. Most HL cases occurred at older ages, thus we could not explore associations with adolescent or young adult HL. Furthermore, estimates may be attenuated due to non-differential exposure misclassification. Future work should aim to extend follow-up and refine both exposure and outcome classification.

Divergent TLR2 and TLR4 Activation by Fungal Spores and Species Diversity in Dust from Waste Sorting Plants.

This manuscript presents the results of an exploratory study on the relationships between NF-κB response through Toll-like receptor (TLR) activation by dust characterized by fungal spore concentrations and species diversity. Personal total dust samples were collected from Norwegian waste sorting plants and then characterized for fungal spores and fungal species diversity, as well as for other bioaerosol components, including endotoxins and actinobacteria. The ability of the dust to induce an NF-κB response by activating TLR2 and TLR4 in vitro was evaluated, as well as the relationship between such responses and quantifiable bioaerosol components. The average concentrations of bioaerosols were 7.23 mg total dust m-3, 4.49 × 105 fungal spores m-3, 814 endotoxin units m-3, and 0.6 × 105 actinobacteria m-3. The mean diversity measurements were 326, 0.59, and 3.39 for fungal richness, evenness, and Shannon index, respectively. Overall, fungal operational taxonomic units (OTUs) belonging to the Ascomycota phylum were most abundant (55%), followed by Basidiomycota (33%) and Mucoromycota (3%). All samples induced significant NF-κB responses through TLR2 and TLR4 activation. While fungal spore levels were positively associated with TLR2 and TLR4 activation, there was a trend that fungal species richness was negatively associated with the activation of these receptors. This observation supports the existence of divergent immunological response relationships between TLR activation and fungal spore levels on one hand and between TLR activation and fungal species diversity on the other. Such relationships seem to be described for the first time for dust from waste facilities. IMPORTANCE This manuscript presents results on multifactorial characterization of bioaerosol exposure in Norwegian waste sorting plants and the potential of such airborne dust to induce NF-κB reactions through TLR2 and TLR4 activations in an in vitro reporter cell model system. Our data revealed that increasing fungal spore levels in the dust is associated with increased activation of TLR2 and TLR4, whereas increasing fungal OTU richness is associated with decreasing activation of these receptors. The NF-κB-induced responses by the collected dust represent, therefore, effective measures of potential key immunological effects induced by a complex mixture of hazardous components, including characterized factors such as endotoxins, fungal spores, bacteria, and many other uncharacterized components. The key immunological events reported here are suggested as holistic alternatives to today's bioaerosol exposure characterization approaches for epidemiological studies in the future.

Chemical Composition of Thoracic Dust at Workplaces During Cement Production.

OBJECTIVES: Cement belongs to the most used building materials. Clinker is the major constituent of cement, and it is believed that the strong increase of pH after hydration of clinker minerals is responsible for the observed decline in lung function of cement production workers. Information on clinker exposure at workplaces in the cement production industry is scarse. The aims of this study are to determine the chemical composition of thoracic dust and to quantify workplace exposure to clinker in cement production. METHODS: The elemental composition of 1250 personal thoracic samples collected at workplaces in 15 plants located in 8 different countries (Estonia, Greece, Italy, Norway, Sweden, Switzerland, Spain, Turkey) was determined by inductively coupled plasma optical emission spectrometry (ICP-OES), separately for water- and acid-soluble fraction. Positive matrix factorization (PMF) was used to determine the contribution of different sources to the dust composition and to quantify the clinker content in 1227 of the thoracic samples. In addition, 107 material samples were analysed to facilitate interpretation of the factors obtained by PMF. RESULTS: The median thoracic mass concentrations varied for individual plants between 0.28 and 3.5 mg/m3. PMF with 8 water-soluble and 10 insoluble (i.e., acid-soluble) element concentrations yielded a five-factor solution: Ca, K, Na sulfates; silicates; insoluble clinker; soluble clinker-rich; and soluble Ca-rich. The clinker content of the samples was calculated as sum of the insoluble clinker and soluble clinker-rich factors. The median clinker fraction of all samples was 45% (range 0-95%), and varied between 20% and 70% for individual plants. DISCUSSION: The 5-factor solution of PMF was selected on the basis of several mathematical parameters recommended in the literature as well as the mineralogical interpretability of the factors. In addition, interpretation of the factors was supported by the measured apparent solubility of Al, K, Si, Fe, and to a lesser extent Ca in material samples. The total clinker content obtained in the present study is considerably lower than estimates based on the Ca concentrations in a sample, and somewhat lower than estimates based on Si concentrations after selective leaching with a methanol/maleic acid mixture. The clinker abundance in workplace dust of one plant investigated in the present contribution was also estimated in a recent study by electron microscopy, and the good agreement between both studies gives confidence in the results of PMF. CONCLUSIONS: The clinker fraction in personal thoracic samples could be quantified from the chemical composition by positive matrix factorization. Our results allow for further epidemiological analyses of health effects in the cement production industry. As these estimates are more accurate for clinker exposure than aerosol mass, stronger associations with respiratory effects are expected if clinker is the main cause of these effects.

Exposure to Particulate Matter and Respirable Crystalline Silica in Tunnel Construction Workers Using Tunnel Boring Machines.

OBJECTIVES: This study aimed to assess the exposure to a selection of aerosols and gases in the work environment for workers performing tunnel construction using tunnel boring machines (TBMs), to identify determinants of exposure based on the information available and to calculate robust estimates of exposure using a statistical model. The focus was particulate matter (PM) and respirable crystalline silica (RCS). In addition, concentrations of nitrogen dioxide (NO2), elemental carbon (EC), and oil mist were assessed. METHODS: Personal sampling was conducted from February 2017 to February 2019. PM in the thoracic and the respirable aerosol fractions was collected, and RCS was determined in the respirable aerosol fraction. Context information was collected on questionnaires. Because the workers could participate in the sampling more than once and multiple measurements were performed on the same date a mixed model was used in the analysis. Concentrations of PM and RCS are presented as estimated and measured geometric means (GMest and GMmea) and estimated arithmetic mean (AMest) in addition to the median. Measured concentrations of NO2, EC, and oil mist are presented as geometric means. RESULTS: A total of 290 and 289 personal samples of PM in the thoracic and respirable aerosol fractions were available for analysis, respectively. Work title/work location, type of work (production, maintenance, or a combination of the two), and date of sampling were identified as determinants of exposure. Workers in the front of the TBMs had the highest exposure to PM and RCS. The GMest of RCS exposure varied from 35 to 413 µg m-3 depending on the work title. The geometric standard deviations for measured RCS concentrations by work title ranged from 1.6 to 3.5. A total of 16 samples of NO2 and EC and 12 samples of oil mist were collected. Maximum values of NO2 and EC were 54 µg m-3 and 23 µg m-3, respectively. The maximum measured value of oil mist was 0.08 mg m-3. CONCLUSIONS: All TBM workers were exposed to PM and RCS. Exposure to RCS may be substantial, and workers in front of the TBM were exposed to the highest concentrations of both PM and RCS. A day-to-day variation was found, probably caused by differences in drilling activities. Preventive measures are warranted to keep the exposure to PM and consequently the exposure to RCS as low as possible to protect the health of workers in tunnel construction.

Nano- and microplastics: a comprehensive review on their exposure routes, translocation, and fate in humans.

Contamination of the environment with nano-and microplastic particles (NMPs) and its putative adverse effects on organisms, ecosystems, and human health is gaining increasing scientific and public attention. Various studies show that NMPs occur abundantly within the environment, leading to a high likelihood of human exposure to NMPs. Here, different exposure scenarios can occur. The most notable exposure routes of NMPs into the human body are via the airways and gastrointestinal tract (GIT) through inhalation or ingestion, but also via the skin due to the use of personal care products (PCPs) containing NMPs. Once NMPs have entered the human body, it is possible that they are translocated from the exposed organ to other body compartments. In our review article, we combine the current knowledge on the (1) exposure routes of NMPs to humans with the basic understanding of the potential (2) translocation mechanisms into human tissues and, consequently, their (3) fate within the human body. Regarding the (1) exposure routes, we reviewed the current knowledge on the occurrence of NMPs in food, beverages, personal care products and the air (focusing on indoors and workplaces) and found that the studies suggest an abundant presence of MPs within the exposure scenarios. The overall abundance of MPs in exposure matrices relevant to humans highlights the importance of understanding whether NMPs have the potential for tissue translocation. Therefore, we describe the current knowledge on the potential (2) translocation pathways of NMPs from the skin, GIT and respiratory systems to other body compartments. Here, particular attention was paid to how likely NMPs can translocate from the primary exposed organs to secondary organs due to naturally occurring defence mechanisms against tissue translocation. Based on the current understanding, we conclude that a dermal translocation of NMPs is rather unlikely. In contrast, small MPs and NPs can generally translocate from the GIT and respiratory system to other tissues. Thus, we reviewed the existing literature on the (3) fate of NMPs within the human body. Based on the current knowledge of the contamination of human exposure routes and the potential translocation mechanisms, we critically discuss the size of the detected particles reported in the fate studies. In some cases, the particles detected in human tissue samples exceed the size of a particle to overcome biological barriers allowing particle translocation into tissues. Therefore, we emphasize the importance of critically reading and discussing the presented results of NMP in human tissue samples.

Exposure-response relationship between hand-arm vibration exposure and vibrotactile thresholds among rock drill operators: a 4-year cohort study.

OBJECTIVES: The risk of developing hand-arm vibration syndrome (HAVS) from occupational hand-arm vibration (HAV) exposure is traditionally determined by the onset of vascular symptoms (white fingers). However, changes in tactile sensibility at the fingertips is a clinical sign of HAVS which in most cases precedes vascular signs. We aimed to assess relationships between occupational HAV exposure and HAVS-related signs including vibration perception thresholds (VPT) and pegboard score on an individual level, using a longitudinal study design with follow-up tests. METHODS: We followed-up 148 workers exposed to different HAV levels for 4 years, with health examinations including VPT tests and pegboard tests carried out at baseline, 2 years and 4 years. VPT testing included seven frequencies, from 8 to 500 Hz. Second and fifth finger on both hands were tested, thus a total of 28 tests on each subject. We investigated associations using linear mixed models and significance level at p≤0.05. RESULTS: There was a significant exposure-response relationship on an individual level between HAV exposure from rock drills and VPT for 16 of 28 test frequencies. The highest rise (worsening) in VPT was found at the 500 Hz test frequency with 1.54 dB increased VPT per 10-fold increase in cumulative exposure. We found no deterioration in pegboard performance associated with HAV exposure among the participants. CONCLUSIONS: Risk predictions of HAVS may be based on exposure-response relationships between HAV exposure and VPT. The 500 Hz test frequency should be included in the VPT test protocols for early detection of signs related to reduced tactile sensibility.

Extended Work Shifts Increase Subjective Pain Complaints Among Cabin Crewmembers, but Not Among Airline Pilots or Healthcare Workers: A Repeated-Measures Study.

OBJECTIVE: To determine whether four consecutive extended work shifts are associated with an increased risk of subjective pain complaints, sleep duration, and sleep disturbances. METHODS: Forty-three healthcare workers, 41 cabin crewmembers, and 18 airline pilots working 4 consecutive extended workdays reported subjective pain complaints and sleep after the 1st and 4th workday. RESULTS: The risk of headache (odds ratio [OR] 21.4, 95% confidence interval [CI] 1.85 to 246.5) and pain in the hands, arms, or wrists (OR 3.78, 95% CI 1.84 to 7.76) increased after workday 4 versus workday 1 in cabin crewmembers. Sleep duration was longer (0.6 to 1.1 hours), and sleep disturbances fewer, the night before the fourth extended workday, compared with before the first workday, in all occupations. CONCLUSIONS: We found no general support for an association between extended work shifts and subjective pain, whereas sleep duration was improved, and sleep disturbances reduced after 4 consecutive extended workdays.

Comparison of cancer incidence and mortality in the Norwegian Fire Departments Cohort, 1960-2018.

OBJECTIVES: Elevated risk of cancer at several sites has been reported among firefighters, although with mixed findings. The purpose of this study was to calculate standardised incidence ratios (SIRs) and standardised mortality ratios (SMRs) for cancer and compare them to assess whether use of the different measures could be a source of inconsistencies in findings. METHODS: The Norwegian Fire Departments Cohort, comprising 4295 male employees who worked at 15 fire departments across Norway, was linked to health outcome registries for the period 1960-2018. SIRs and SMRs were derived using national reference rates. RESULTS: Overall, we observed elevated incidence of colon cancer (SIR, 95% CI 1.27, 1.01 to 1.58), mesothelioma (2.59, 1.12 to 5.11), prostate cancer (1.18, 1.03 to 1.34) and all sites combined (1.15, 1.08 to 1.23). Smaller, non-significant elevations were found for mortality of colon cancer (SMR, 95% CI 1.20, 0.84 to 1.67) and mesothelioma (1.66, 0.34 to 4.86), while SMR for prostate cancer was at unity. Potential errors were observed in some of the mortality data, notably for mesothelioma cases. Among those who died of cancer, 3.7% (n=14) did not have a prior diagnosis of malignancy at the same site group. CONCLUSIONS: Assessment of incidence or mortality did not greatly influence the interpretation of results. The most prominent differences in SIR and SMR appeared to be due to inconsistencies between sites of cancer diagnosis and cause of death. The difference in SIR and SMR for prostate cancer suggested a detection bias from differential screening practices.

Firefighting and melanoma, epidemiological and toxicological associations: a case report.

The International Agency for Research on Cancer (IARC) classifies firefighting as possibly carcinogenic to humans, and polychlorinated biphenyls (PCBs) as carcinogens with sufficient evidence for development of melanoma in humans. We present a case report of a firefighter with melanoma and history of 33 years of occupational exposure. Based on the available epidemiological and toxicological evidence of association between being a firefighter and developing melanoma, melanoma was recognized by the Norwegian Labour and Welfare Service as an occupational disease in our patient. In 2017, melanoma was acknowledged as an occupational disease in only 8 out of 28 surveyed European countries. Melanoma should be considered as a possible occupational disease among firefighters with a history of relevant exposure. Further recognition of the occupational exposures leading to increased risk of melanoma is still needed for preventive purposes.

Cancer incidence in sites potentially related to occupational exposures: 58 years of follow-up of firefighters in the Norwegian Fire Departments Cohort.

OBJECTIVES: Firefighters are exposed to a variety of known and suspected carcinogens through their work. However, the association with cancer risk has limited evidence. We examined cancer incidence among firefighters in the newly established Norwegian Fire Departments Cohort restricted to sites with established associations with carcinogens encountered during firefighting. This included sites within the respiratory, urinary, and lympho-hematopoietic systems, and the skin and all sites combined. METHODS: Male firefighters (N=3881) in the cohort were linked to the Cancer Registry of Norway for incident cancer cases occurring during the period 1960-2018. We calculated standardized incidence ratios (SIR) with rates for the national male population as reference, and stratified SIR analyses by period of first employment, duration of employment, and time since first employment. RESULTS: Elevated risk was seen for all sites combined (SIR 1.15, 95% confidence interval 1.07-1.23). Elevated risk of urinary tract cancer was observed among firefighters who began working before 1950, and with observation ≥40 years since first employment. Risk of mesothelioma and laryngeal cancer were elevated with ≥40 years since first employment and with ≥30 years employment duration. CONCLUSIONS: The observed associations between firefighting and urinary tract cancer, laryngeal cancer, and mesothelioma have been observed in some studies previously, and our results suggest the observed elevated risks are related to carcinogenic occupational exposures. Differences in risk by period of employment potentially reflect changes in exposures from improved quality and use of personal protective equipment.

Parental occupational exposures in wood-related jobs and risk of testicular germ cell tumours in offspring in NORD-TEST a registry-based case-control study in Finland, Norway, and Sweden.

OBJECTIVE: We assessed the association between parental prenatal exposures in wood-related jobs and risk of testicular germ cell tumours (TGCT) in offspring. METHODS: NORD-TEST, a registry-based case-control study in Sweden, Finland and Norway, included 8112 TGCT cases diagnosed at ages 14-49 years between 1978 and 2012 with no history of prior cancer, and up to four controls matched to each case on year and country of birth. Parents of cases and controls were identified via linkages with the population registries and their occupational information was retrieved from censuses. The Nordic Occupational Cancer Study Job-Exposure Matrix was used to assign occupational exposures to each parent. Logistic regression models were used to estimate odds ratios (OR) and 95% confidence intervals (CI). RESULTS: Maternal wood-related job was not associated with the risk of TGCT in offspring (OR 1.08, CI 0.55-2.14), while paternal wood-related job was associated with a decreased risk of TGCT in offspring (OR 0.85, CI 0.75-0.96). None of the specific wood-related jobs, such as upholsterers, sawyers, or construction carpenters, were significantly associated with a risk of TGCT. Only exception was observed in a sensitivity analysis which showed an increased risk in the small group of sons of fathers working as 'cabinetmakers and joiners' the year before conception (OR of 2.06, CI 1.00-4.25). CONCLUSION: This large-scale NORD-TEST analysis provided no evidence of an association between parental prenatal exposures in wood-related jobs and TGCT in sons.

Cancer incidence in agricultural workers: Findings from an international consortium of agricultural cohort studies (AGRICOH).

BACKGROUND: Agricultural work can expose workers to potentially hazardous agents including known and suspected carcinogens. This study aimed to evaluate cancer incidence in male and female agricultural workers in an international consortium, AGRICOH, relative to their respective general populations. METHODS: The analysis included eight cohorts that were linked to their respective cancer registries: France (AGRICAN: n = 128,101), the US (AHS: n = 51,165, MESA: n = 2,177), Norway (CNAP: n = 43,834), Australia (2 cohorts combined, Australian Pesticide Exposed Workers: n = 12,215 and Victorian Grain Farmers: n = 919), Republic of Korea (KMCC: n = 8,432), and Denmark (SUS: n = 1,899). For various cancer sites and all cancers combined, standardized incidence ratios (SIR) and 95% confidence intervals (CIs) were calculated for each cohort using national or regional rates as reference rates and were combined by random-effects meta-analysis. RESULTS: During nearly 2,800,000 person-years, a total of 23,188 cancers were observed. Elevated risks were observed for melanoma of the skin (number of cohorts = 3, meta-SIR = 1.18, CI: 1.01-1.38) and multiple myeloma (n = 4, meta-SIR = 1.27, CI: 1.04-1.54) in women and prostate cancer (n = 6, meta-SIR = 1.06, CI: 1.01-1.12), compared to the general population. In contrast, a deficit was observed for the incidence of several cancers, including cancers of the bladder, breast (female), colorectum, esophagus, larynx, lung, and pancreas and all cancers combined (n = 7, meta-SIR for all cancers combined = 0.83, 95% CI: 0.77-0.90). The direction of risk was largely consistent across cohorts although we observed large between-cohort variations in SIR for cancers of the liver and lung in men and women, and stomach, colorectum, and skin in men. CONCLUSION: The results suggest that agricultural workers have a lower risk of various cancers and an elevated risk of prostate cancer, multiple myeloma (female), and melanoma of skin (female) compared to the general population. Those differences and the between-cohort variations may be due to underlying differences in risk factors and warrant further investigation of agricultural exposures.

Hand-Arm Vibration Exposure in Rock Drill Workers: A Comparison between Measurements with Hand-Attached and Tool-Attached Accelerometers.

OBJECTIVES: To assess the hazard of tool vibrations, we need valid exposure measurements. The use of hand-attached accelerometers (vibration sensors) to measure hand-arm vibrations (HAVs) has become a popular approach. However, according to International Standard ISO 5349-2, the preferred attachment of accelerometers is at the tool handle. We compared measures of HAV between hand- and tool-attached accelerometers in rock drilling. METHODS: We measured HAV in five rock drillers using jackleg drills in normal working operations with simultaneous measures of both hand-attached and tool-attached accelerometers. Five to seven measurement cycles of 15 s were executed on each worker, resulting in a total of 29 measurement cycles. To identify possible differences in working technique, we recorded videos of tool handle handgrips during drilling. RESULTS: There was a significant difference (9.5 m s-2; P ≤ 0.05) in vibration magnitudes measured by the tool-attached accelerometers compared with the hand-attached accelerometers. The hand-attached accelerometer showed a lower vibration magnitude for all workers (range of difference: 2.3-14.6). The variation between the two accelerometer attachments was larger between workers than within workers (ICC = 0.68). CONCLUSIONS: For measurements of HAV from jackleg drills, the use of hand-attached accelerometers may cause a lower recorded vibration level compared with tool-attached accelerometers. This difference is likely to vary depending on how workers grip the tool handle, and a misclassification of exposure will occur if workers grip the tool handle in a way that makes the accelerometer lose contact with the vibrating surface. Individual differences in how workers grip the tool handles should be considered when assessing HAV.

Safety incidents associated with extended working hours. A systematic review and meta-analysis.

OBJECTIVE: We performed a systematic review to assess potential consequences of extended working hours on accidents, near-accidents, safety incidents and injuries (incidents) by considering the overall certainty of evidence. METHODS: We searched five databases systematically (Medline, Embase, PsycINFO, Web of Science, and Proquest Health and safety Science Abstract) and identified 10072 studies published until December 2020. Twenty-two studies met the inclusion criteria. We followed a systematic approach to evaluate risk of bias and synthesize results in a meta-analysis. The certainty of evidence was determined by a modified version of The Grading of Recommendations Assessment, Development and Evaluation (GRADE). RESULTS: Our analyses indicated an association between working >12 hours/day (RR: 1.24, 95%CI: 1.11, 1.40), or working >55 hours/week (RR: 1.24, 95%CI: 0.98, 1.57), and elevated risk of incidents. The certainty of evidence evaluated as low. Weak or no associations were observed for other exposure contrasts: working >8 hours/day (RR: 0.93, 95%CI: 0.72, 1.19), or working overtime (RR: 1.08, 95%CI: 0.75, 1.55), working 41-48 hours/week (RR: 1.02, 95%CI: 0.92, 1.13) or 49-54 hours/week (RR: 1.02, 95%CI: 0.97, 1.07). The certainty of evidence was evaluated as low (very low for 41-48 hours/week). CONCLUSIONS: Daily working hours >12 hours and weekly working hours exceeding 55 hours was associated and increased risk of incidents. The level of evidence was low. Hence, further high-quality research is warranted to elucidate these associations.

Tremor measurements in a 22-year cohort study of workers exposed to hand-held vibrating tools.

OBJECTIVES: The objectives of this cohort study were to evaluate possible long-term effects of occupational exposure to hand-arm vibration (HAV) in terms of increased tremor. The aims were to evaluate whether exposure during follow-up, baseline hand-arm vibration syndrome (HAVS), baseline manual dexterity or current medical conditions or life-style habits might be associated with increased tremor. A further aim was to compare two different activation conditions: postural vs rest tremor. METHODS: Forty men (current age: 60.4 years) who had previously worked as manual workers in a specialized engineering and construction company enrolled in the study. Their hand functions had been examined in 1994. At the baseline examination, 27 had been diagnosed with HAVS, while 13 were not exposed. The follow-up examination in 2016-2017 comprised the CATSYS Tremor Pen® for measuring postural and rest tremor and the Grooved Pegboard Test for assessing manual dexterity. Blood samples were taken for assessing biomarkers that might have impact on tremor. RESULTS: Neither cumulative exposure to HAV during follow-up nor HAVS at baseline were associated with increased tremor. A test for manual dexterity at baseline was significantly associated with increased tremor (Tremor Intensity) at follow-up. Blood markers of current medical conditions and tobacco consumption were associated with increased tremor. Rest tremor frequency was higher than postural tremor frequency (p < 0.001). CONCLUSIONS: The main findings of this 22-year cohort study were no indications of long-term effects on tremor related to HAV exposure and previous HAVS status. However, baseline manual dexterity was significantly associated with increased tremor at follow-up. Activation conditions (e.g., hand position) are important when testing tremor.