RESUMO
In the last two decades, in France, Porcine Reproductive and Respiratory Syndrome Virus (PRRSV) stabilization protocols have been implemented using mass vaccination with a modified live vaccine (MLV), herd closure and biosecurity measures. Efficient surveillance for PRRSV is essential for generating evidence of absence of viral replication and transmission in pigs. The use of processing fluid (PF) was first described in 2018 in the United States and was demonstrated to provide a higher herd-level sensitivity compared with blood samples (BS) for PRRSV monitoring. In the meantime, data on vertical transmission of MLV viruses are rare even as it is a major concern. Therefore, veterinarians usually wait for several weeks after a sow mass vaccination before starting a stability monitoring. This clinical study was conducted in a PRRSV-stable commercial 1000-sow breed-to-wean farm. This farm suffered from a PRRS outbreak in January 2018. After implementing a stabilisation protocol, this farm was controlled as stable for more than 9 months before the beginning of the study. PF and BS at weaning were collected in four consecutive batches born after a booster sow mass MLV vaccination. We failed to detect PRRSV by qPCR on PF and BS collected in a positive-stable breeding herd after vaccination with ReproCyc® PRRS EU (Boehringer Ingelheim, Ingelheim, Germany).
RESUMO
We conducted a meta-analysis of pharmacogenomic substudies of three randomized trials conducted in patients with decompensated heart failure (HF) that were led by National Heart Lung and Blood Institute (NHLBI)-funded HF Network to test the hypothesis that candidate genes modulate net fluid loss and weight change in patients with decompensated HF treated with a furosemide-based diuretic regimen. Although none of the genetic variants previously shown to modulate the effects of loop diuretics in healthy individuals were associated with net fluid loss after 72 h of treatment, a set of rare variants in the APOL1 gene, which codes for apolipoprotein L1 (P=0.0005 in the random effects model), was associated with this end point. Moreover, a common variant in the multidrug resistance protein-4 coding gene (ABCC4, rs17268282) was associated with weight loss with furosemide use (P=0.0001). Our results suggest that both common and rare genetic variants modulate the response to a furosemide-based diuretic regimen in patients with decompensated HF.
Assuntos
Apolipoproteínas/genética , Furosemida/administração & dosagem , Insuficiência Cardíaca/tratamento farmacológico , Lipoproteínas HDL/genética , Proteínas Associadas à Resistência a Múltiplos Medicamentos/genética , Variantes Farmacogenômicos , Polimorfismo de Nucleotídeo Único , Inibidores de Simportadores de Cloreto de Sódio e Potássio/administração & dosagem , Administração Intravenosa , Idoso , Idoso de 80 Anos ou mais , Apolipoproteína L1 , Ensaios Clínicos como Assunto , Feminino , Deslocamentos de Líquidos Corporais/efeitos dos fármacos , Genótipo , Insuficiência Cardíaca/diagnóstico , Insuficiência Cardíaca/genética , Insuficiência Cardíaca/fisiopatologia , Humanos , Masculino , Pessoa de Meia-Idade , Farmacogenética , Fenótipo , Fatores de Tempo , Resultado do Tratamento , Equilíbrio Hidroeletrolítico/efeitos dos fármacosRESUMO
Interactions between macromolecular systems and biosurfaces are complicated by both the complexity of these multivalent interactions and challenges in quantifying affinities. A library of gold nanoparticles (AuNPs) as multivalent probes is used to quantify biosurface affinity, using hair as a model targeted substrate.
RESUMO
The influence of maternally-derived antibodies (MDAs) on the post-vaccination humoral and cellular immune responses in piglets vaccinated against PRRS was studied. The piglets came from a vaccinated breeding herd. Thirty piglets with a low (A-) or high level (A+) of PRRSV-neutralizing MDAs were vaccinated (V+) with a modified live vaccine at 3 weeks of age. Blood samples were collected before vaccination and then at 2, 4, 8 and 14 weeks post-vaccination (WPV). The samples were analysed to detect the vaccine viraemia (RT-PCR) and quantify the post-vaccination humoral (ELISA and virus neutralisation test) and cellular (ELISPOT IFNγ) immune responses. PRRSV vaccine strain was detected in 60%, 64%, 36% and 0% of A-V+ piglets 2, 4, 8 and 14 WPV respectively. No virus was detected in A+V+ piglets during the first four WPV but 32% and 6% of A+V+ piglets were PCR-positive at 8 and 14 WPV. Eighty-five percent of A-V+ piglets and 0% of A+V+ piglets seroconverted (ELISA) between 2 and 4 WPV. Neutralising antibodies appeared 4 WPV in the A-V+ piglets and 14 WPV in the A+V+ piglets. The number of PRRSV-specific IFNγ-secreting cells was significantly higher in A-V+ piglets at 2 and 4 WPV than in A+V+ piglets. These results show that MDAs can affect both post-vaccination humoral and cellular immune responses in piglets. Further studies are required to assess the impact of MDAs on vaccine efficacy following a PRRSV challenge and its ability to reduce viral transmission.
Assuntos
Anticorpos Antivirais/sangue , Imunidade Materno-Adquirida , Síndrome Respiratória e Reprodutiva Suína/prevenção & controle , Vacinação , Vacinas Virais/imunologia , Animais , Formação de Anticorpos/imunologia , SuínosRESUMO
The aim of this study was to conduct a descriptive study of haemoglobin concentration found on high-prolificacy sows, to study the relationship between the concentration of haemoglobin and body reserves, and to determine whether anaemia is a risk factor for reproductive performance. A cohort of 308 sows from seven farms was followed from the last third of gestation to the confirmation of the following gestation. Haemoglobin concentration was assessed at four stages of the reproductive cycle: seven and four weeks before farrowing, a few days and three weeks after farrowing. Backfat thickness (BFT) was measured at parturition. The results were analysed using linear mixed-effect models. The mean haemoglobin concentration was 108.4 g/l. The mean modellised haemoglobin concentration of parity 1 sows with a BFT of 16 mm, sampled seven weeks before farrowing, was 118 g/l. Haemoglobin concentration of sows of parity 6 or higher was 8.0 g/l lower than those of parity 1 sows (95% confidence interval -11.0 to -5.1). Haemoglobin concentration is lower in sows with a lower BFT, whatever parity rank. There is no evidence of a relation between haemoglobin concentration and the number of total born, stillborn or number of piglets alive at three weeks and the next breeding performance.
Assuntos
Anemia/veterinária , Hemoglobinas/metabolismo , Reprodução/fisiologia , Doenças dos Suínos/sangue , Suínos/fisiologia , Tecido Adiposo/metabolismo , Anemia/sangue , Anemia/fisiopatologia , Animais , Composição Corporal/fisiologia , Estudos de Coortes , Feminino , Hemoglobinas/análise , Paridade , Gravidez , Resultado da Gravidez , Suínos/sangue , Doenças dos Suínos/fisiopatologiaRESUMO
Confocal laser scanning microscopy (CLSM) is used to follow the dynamic structural evolution of several phase-separated mixed biopolymer gel composites. Two protein/polysaccharide mixed gel systems were examined: gelatin/maltodextrin and gelatin/agarose. These materials exhibit 'emulsion-like' structures, with included spherical particles of one phase (i.e. polymer A) within a continuous matrix of the second (i.e. polymer B). Compositional control of these materials allows the phase order to be inverted (i.e. polymer B included and polymer A continuous), giving four basic variants for the present composites. Tension and compression mechanical tests were conducted dynamically on the CLSM, with crack/microstructure interactions investigated using a notched compact tension geometry. Gelatin/maltodextrin composites exhibit a 'pseudo-yielding' stress/strain response in both tension and compression, when the gelatin-rich phase is continuous, which was attributed to debonding of the particle/matrix interface. This behaviour is significantly less apparent for both the gelatin/agarose composites, and the maltodextrin continuous gelatin/maltodextrin composites, with these materials responding in a nominally linear elastic manner. Values of the interfacial fracture energy for selected compositions of the two biopolymer systems were determined by 90 degrees peel testing, where a gelatin layer was peeled from either a maltodextrin or agarose substrate. For biopolymer layers 'cast' together, a value of 0.2 +/- 0.2 J m-2 was obtained for the fracture energy of a gelatin/maltodextrin interface, while a significantly higher value of 6.5 +/- 0.2 J m-2 was determined for a gelatin/agarose interface. The interfacial fracture energy of the two mixed systems was also determined following an indirect elastomer composite debonding model. An interfacial fracture energy of approximately 0.25 J m-2 was determined using this approach for the gelatin continuous gelatin/maltodextrin composite, which compares favourably with the value calculated directly by peel testing (i.e. approximately 0.2 J m-2). A somewhat higher value was estimated for the gelatin continuous gelatin/agarose system (1.0-2.0 J m-2), using this model, although there are severe limitations to this approach for this mixed gel system. In the present case, it is believed that the differing mechanical response of the two mixed biopolymer systems, when the gelatin phase is continuous, arises from the order of magnitude difference in interfacial fracture energy. It is postulated that polymer interdiffusion may occur across the interface for the gelatin/agarose system, to a significantly greater extent than for interfaces between gelatin and maltodextrin, resulting in a higher interfacial fracture energy.
Assuntos
Biopolímeros , Alimentos , Microscopia Confocal , Gelatina/ultraestrutura , Polissacarídeos/ultraestrutura , Sefarose/ultraestrutura , Propriedades de SuperfícieRESUMO
Confocal laser scanning microscopy (CLSM) is used to follow the dynamic structural evolution of several phase-separated mixed biopolymer gel composites. Two protein/polysaccharide mixed gel systems were examined: gelatin/maltodextrin and gelatin/agarose. These materials exhibit 'emulsion-like' structures, with included spherical particles of one phase (i.e. polymer A) within a continuous matrix of the second (i.e. polymer B). Compositional control of these materials allows the phase order to be inverted (i.e. polymer B included and polymer A continuous), giving four basic variants for the present composites. Tension and compression mechanical tests were conducted dynamically on the CLSM, with crack/microstructure interactions investigated using a notched compact tension geometry. Gelatin/maltodextrin composites exhibit a 'pseudo-yielding' stress/strain response in both tension and compression, when the gelatin-rich phase is continuous, which was attributed to debonding of the particle/matrix interface. This behaviour is significantly less apparent for both the gelatin/agarose composites, and the maltodextrin continuous gelatin/maltodextrin composites, with these materials responding in a nominally linear elastic manner. Values of the interfacial fracture energy for selected compositions of the two biopolymer systems were determined by 90 degrees peel testing, where a gelatin layer was peeled from either a maltodextrin or agarose substrate. For biopolymer layers 'cast' together, a value of 0.2 +/- 0.2 J m-2 was obtained for the fracture energy of a gelatin/maltodextrin interface, while a significantly higher value of 6.5 +/- 0.2 J m-2 was determined for a gelatin/agarose interface. The interfacial fracture energy of the two mixed systems was also determined following an indirect elastomer composite debonding model. An interfacial fracture energy of approximately 0.25 J m-2 was determined using this approach for the gelatin continuous gelatin/maltodextrin composite, which compares favourably with the value calculated directly by peel testing (i.e. approximately 0.2 J m-2). A somewhat higher value was estimated for the gelatin continuous gelatin/agarose system (1.0-2.0 J m-2), using this model, although there are severe limitations to this approach for this mixed gel system. In the present case, it is believed that the differing mechanical response of the two mixed biopolymer systems, when the gelatin phase is continuous, arises from the order of magnitude difference in interfacial fracture energy. It is postulated that polymer interdiffusion may occur across the interface for the gelatin/agarose system, to a significantly greater extent than for interfaces between gelatin and maltodextrin, resulting in a higher interfacial fracture energy.
RESUMO
Thermal, mechanical, turbidity, and microscope evidence is provided which strongly suggests molecular interpenetrating network (IPN) formation by mixtures of the bacterial and seaweed polysaccharides gellan and agarose. There is no evidence for synergistic coupling of the networks, and simple phase separation (demixing) can definitely be ruled out. Some changes in the gellan gelling behavior are suggested, however, by the increased gellan effective concentrations implicit in cure curve data. The dependence of this effect on the agarose nominal concentration seems consistent with a previous model that focused on gelling parameters, and changes in these rather than real concentration effects. In large deformation mechanical tests, the influence of agarose added to gellan is to re-enforce the network (higher compression and shear moduli, higher stresses-to-break) without significantly changing the strain to break, or the gellan brittle failure mechanism.
Assuntos
Polissacarídeos Bacterianos/química , Sefarose/química , Algoritmos , Varredura Diferencial de Calorimetria , Géis , Microscopia Confocal , Microscopia Eletrônica , Nefelometria e Turbidimetria , Reologia , Alga Marinha/química , Espectrofotometria Ultravioleta , Sphingomonas/químicaRESUMO
The current study focuses on the effects of the molecular weight on the mechanical behavior of agarose gels. The small strain rheology and large strain deformation/failure behavior of three different molecular weight agarose gels have been examined, with the results expressed in term of molar concentration. For small deformation strains, the gelation temperature at low concentrations and the critical concentration for gel formation are strongly affected by the molecular weight. In addition, the elasticity of the network is also very sensitive to this parameter. It has been demonstrated that the experimental gelation cure curves can be superimposed on a universal gelation master curve, independent of the cure time. This would indicate self-similarity of the network at different scales, irrespective of concentration. A relationship between the elastic modulus and the molecular weight has been extracted from these results, where the molecular weight dependence exhibits a power law exponent of 2.42. For large deformation strains, the Poisson ratio has been estimated to be 0.5 for each of the agarose types examined, which indicates that these gels are incompressible. The strain at failure is largely dependent on the molecular weight, and is essentially independent of the biopolymer concentration. This result highlights the fact that the strain at failure is sensitive to the connectivity distances in the gel network. However, the failure stress and Young's modulus of agarose gels show a dependence on both concentration and molecular weight. The observations regarding Young's modulus are in good agreement with those found for small deformation strain rheology for the shear modulus. One of the primary advantages of using the lowest molecular weight agarose is that higher molar concentrations can be reached (more molecules per unit volume). However, the mechanical response of agarose gels is very sensitive to the molecular weight at fixed molar concentration, and if the present results are extrapolated to very low molecular weight, it can be suggested that below a limiting molecular weight a percolating network will not be formed, as suggested by the Cascade model (Carbohydr. Polym. 1994, 23, 247-251). This speculation is based on the influence of the "connectivity" at long distances, which influences the strain at failure (when the strain at failure is zero, the system is not connective).