On the absorption and electromagnetic field spectral shifts in plasmonic nanotriangle arrays.

The behavior of the electromagnetic field interaction with gold nanotriangles organized in bow-tie arrays is investigated. A side-by-side comparison between the measured absorbance of the array and the modelled integrated electric field resonances confined around the gold structures is presented and discussed to explain the spectral shift between both parameters. Finite difference time domain calculations and Raman measurements of gold triangles of different sizes and periodicity are systematically performed. Numerical calculations show that the spectral maximum of the electric field varies in distinct areas over the metallic structures.

Directing GPCR-transfected cells and neuronal projections with nano-scale resolution.

Surface modification technology has made significant advances in recent years towards the miniaturization and organization of traditional cell culture systems. However, the capability of directing transfected cells and neuronal connections to probe small structures such as spines is still under development. In the current work, interactions of different micropatterned substrates with HEK 293, CF10 cell lines, and primary neuronal cultures are evaluated. Using conventional and confocal fluorescence microscopies, several morphological and behavioral aspects of all three cell types were investigated. The immortalized cell lines were able to attach to the substrate and interact with neighboring cells. Similarly, cortical neurons formed connections guided by the micropatterns. Transfection of HEK 293 or CF10 cell lines with specific members of the G protein-coupled receptor family did not alter the behavior of these cells in the micropatterns. On the other hand, neuronal projections were efficiently isolated by the patterns, simplifying the localization of spines with nano-scale resolution probed by atomic force microscopy. This work presents a valuable approach to isolate cells or to constrain important cell structures to grow along a desired pattern, thus facilitating advanced biological studies.

Photolysis and thermolysis of pyridyl carbonyl azide monolayers on single-crystal platinum.

The photochemical and thermal reactivity of a number of acyl azide-substituted pyridine compounds, namely nicotinyl azide, isonicotinyl azide, picolinyl azide and dinicotinyl azide with investigated as saturated monolayers on a single-crystal Pt(111) surface in an ultrahigh vacuum chamber. Multilayers of the substrates exhibited a maximum rate of desorption at 270 K, above which, stable saturated monolayers formed as characterized by reflection-absorption infrared spectroscopy by observation of C=O and N3 bands at 1700 cm(-1), and 2100 and 1300 cm(-1) respectively. The monolayers were stable up to 400 K. Photolysis of the monolayer (or heating above 400 K) results in the formation of the respective isocyanate intermediate after loss of nitrogen as evidenced by the appearance of a new infrared band at 2260 cm(-1) with concomitant loss of the azide bands. The resulting isocyanate saturated monolayer is stable in absence of nucleophiles, but can be quenched with appropriate nucleophiles.

SERS detection of streptavidin/biotin monolayer assemblies.

A two-dimensional array of gold nanotriangles inscribed onto glass coverslips were optimized for the surface-enhanced Raman detection of streptavidin/biotin monolayer assemblies. The nanostructures were fabricated by electron beam lithography, and its optical parameters were optimized to be probed under a Raman microscope with a linearly polarized He-Ne laser with an excitation wavelength of λ = 632.8 nm. The platforms were first tested against a monolayer of biotinylated alkanethiols (BAT) functionalized over the gold nanostructure, showing that good-quality spectra could be acquired with a short acquisition time. The supramolecular interaction of streptavidin (strep) with BAT showed subsequent modification of the Raman spectrum that implies a change in the secondary structure of the host biomolecule (streptavidin). Compared to gold surfaces without nanoscale structures, the local enhancement that results from our nanostructured surfaces allows one to detect the vibrational signal of monolayers within a time on the order of seconds and under modest laser intensity, further demonstrating the utility of using plasmonic metallic nanostructures for molecular recognition.

Plasmonic properties of Fischer's patterns: polarization effects.

We report the fabrication and the optical study of Fisher's patterns inscribed on glass slides. Such structures, fabricated by electron beam lithography, consist of gold nanotriangles, organized in a hexagonal arrangement. By changing the fabrication conditions, it is possible to control precisely the size of the structures and the gap distance between facing triangles but most importantly, to finely tune their localized surface plasmon resonance. In addition to the experimental studies, the plasmonic properties of the Fischer's patterns were characterized as a function of the polarization of the incoming light. Finite difference time domain (FDTD) method was used to support the experimental results and to investigate the electromagnetic field enhancement on a Fischer's pattern lattice unit for different wavelengths and polarization of the irradiation source.

Positionally controlled growth of cells using a cytophobic fluorinated polymer.

This paper presents a novel method for cell positioning on a substrate which combines the optical quality of glass and the cell-repelling property of fluoropolymers. The process employs plasma lithography, which utilizes the high-resolution patterning of photolithography along with the versatility of the plasma polymerization. When mammalian cells were grown over these substrates, they avoided the fluoropolymer regions and grew almost exclusively within the exposed glass areas (windows). The patterned surface reproduces the initial design of the mask, offering the possibility to control cell distances and interactions with a versatile arrangement whilst keeping the optical quality of glass for microscopy observation, in particular, when a pristine substrate in needed. This approach opens up possibilities for analysis of biological processes, such as studying cell interactions, with the integration of optical or electrical sensors.

Smart materials behavior in phosphates: role of hydroxyl groups and relevance to antiwear films.

The elastic properties of materials under high pressure are relevant to the understanding and performance of many systems of current interest, for example, in geology and tribology. Of particular interest is the origin of the dramatic increase in modulus with increasing pressure, a response which is also called "smart materials behavior." In this context, simple phosphate-containing materials have been studied experimentally and theoretically, and the origins of this behavior have been associated with factors such as coordination of the cations and changes in the degree of polymerization and hydrogenation of the phosphate units. In the present paper we extend the former analysis on simple metal phosphate model compounds to so-called thermal films, an intermediate stage in the formation of effective antiwear films. The material was produced by heating a commercial zinc dialkyldithiophosphate (ZDDP), a common antiwear additive in lubricating oils, in poly-alpha-olefin base oil solutions to 150 degrees C, a process known to produce the thermal films. Its structure and equation of state were studied by means of x-ray diffraction and IR synchrotron radiation techniques during compression up to 25 GPa in a diamond anvil cell as well as during the subsequent decompression. As is the case for the simple metal phosphates, we find that the thermal films are relatively soft at low pressures but stiffen rapidly and ultimately amorphize irreversibly at high pressure. However, in addition to phase transformations involving cation sites occurring in the metal phosphates studied previously, thermal films undergo displacive transitions associated with instabilities of the hydroxyl groups. These results may imply that ZDDP ligands and those of the transformed materials not only affect ZDDP decomposition rate in engines but also the mechanical properties of the resulting antiwear films.

On the pressure-induced loss of crystallinity in orthophosphates of zinc and calcium.

A recently suggested mechanism for the stress memory of various metal phosphates is investigated experimentally. Based on first-principles simulations [N. J. Mosey et al., Science 307, 1612 (2005)], it had been argued that atoms with flexible coordination, such as zinc or heavy-metal cations, act as network-forming agents, undergoing irreversible pressure-induced changes in bonding that lead to increased connectivity between phosphate anions. In the present study, orthophosphates of zinc and calcium were exposed to high pressures on surfaces and in diamond anvil cells. An additional set of first-principles simulations was accomplished on alpha-orthophosphate of zinc, which suggested that this material was already cross-linked before compression but that it nevertheless underwent a reversible coordination change under pressure in agreement with the experimental results presented here. Raman spectra indicate an irreversible, pressure-induced loss of long-range crystallinity. The pressures required to induce these changes are around 7 GPa for the zinc phosphates, while they are close to 21 GPa for the calcium phosphates. Hydrogenation of the metal phosphate lowers the threshold pressure by approximately 2-3 GPa in both cases. Moreover, alpha-orthophosphate of zinc could be partially amorphisized under nonisotropic pressure on copper foils.

A novel metal-protected plasma treatment for the robust bonding of polydimethylsiloxane.

We describe a method for the irreversible bonding of PDMS-based microfluidic components by exploiting the first reported "shelfable" plasma treatment of PDMS. Simultaneous plasma activation and protection of PDMS surfaces are achieved via RF magnetron sputtering of thin aluminium films in the presence of an argon plasma. In this process, Ar plasma exposure generates a hydrophilic, silanol-enriched polymer surface amenable to irreversible bonding to glass, PDMS or silicon substrates, while the aluminium film functions as a capping layer to preserve the surface functionality over several weeks of storage in ambient conditions. Prior to bonding, this protective aluminium layer is removed by immersion in an aqueous etchant, exposing the adhesive surface. Employing this technology, PDMS-glass and PDMS-PDMS microfluidic devices were fabricated and the adhesive strength was quantified by tensile and leakage testing. Bonding success rates in excess of 80% were demonstrated for both PDMS-glass and PDMS-PDMS assemblies sealed 24 h and 7 days following initial polymer surface activation. PDMS-glass microdevices performed optimally, displaying maximum adhesive strengths on the order of 5 MPa and burst flow rates of approximately 1 mL min(-1) (channel dimensions: l = 25 mm; w = 300 microm; h = 20 microm). These data demonstrate a significant improvement in performance over previously reported bonding technologies, resulting in the production of more robust, longer-lasting microfluidic systems that can withstand higher pressures and flow rates.

Spatially controlled cell adhesion via micropatterned surface modification of poly(dimethylsiloxane).

Spatial control of cell growth on surfaces can be achieved by the selective deposition of molecules that influence cell adhesion. The fabrication of such substrates often relies upon photolithography and requires complex surface chemistry to anchor adhesive and inhibitory molecules. The production of simple, cost-effective substrates for cell patterning would benefit numerous areas of bioanalytical research including tissue engineering and biosensor development. Poly(dimethylsiloxane) (PDMS) is routinely used as a biomedical implant material and as a substrate for microfluidic device fabrication; however, the low surface energy and hydrophobic nature of PDMS inhibits its bioactivity. We present a method for the surface modification of PDMS to promote localized cell adhesion and proliferation. Thin metal films are deposited onto PDMS through a physical mask in the presence of a gaseous plasma. This treatment generates topographical and chemical modifications of the polymer surface. Removal of the deposited metal exposes roughened PDMS regions enriched with hydrophilic oxygen-containing species. The morphology and chemical composition of the patterned substrates were assessed by optical and atomic force microscopies as well as X-ray photoelectron spectroscopy. We observed a direct correlation between the surface modification of PDMS and the micropatterned adhesion of fibroblast cells. This simple protocol generates inexpensive, single-component substrates capable of directing cell attachment and growth.

Fibronectin organization under and near cells.

Polymerization of soluble fibronectin molecules results in fibres that are visible as networks using fluorescently labelled fibronectin protomers or by antibody labelling. Displacement of fibres composed of modified protomers in living cells provides information regarding matrix structure, organization, and movement. A static analysis of fibronectin structures and patterns of organization provide insight into their reorganization during adhesion and motility. Confocal microscopy and atomic force microscopy (AFM) reveal fibronectin-containing networks aligned in arrays perpendicular to the retracting cell edge and in apparently disordered networks of fibres under the cell. The change in patterns suggests a reorganization of fibronectin from disordered arrays used for adhesion into ordered arrays during movement of the cell. Comparison of confocal images with corresponding AFM images confirms that the fibres left on the surface as the cell moves away do contain fibronectin. The orientation of these fibres relative to the tail (uropod) and the receding edges of the cell leads us to propose that cells generate a force on the fibres that exceeds the adhesion force of the fibres to the surface causing them to pull fibronectin fibres into straight arrays. However, when the fibres are parallel to the direction of pull, the fibres remain attached to the surface. The data supports the hypothesis that disorganized, linear fibres are the product of Fn polymerization induced by the cell beneath it and serve to adhere the cell to the substrate as the cell spreads, whereas arrays of fibres found outside the cell are formed as existing fibrils and reorganize during cell motility.

Photolithographically patterned surface modification of poly(dimethylsiloxane) via UV-initiated graft polymerization of acrylates.

Patterned surface modification of poly(dimethylsiloxane) (PDMS) is achieved by combining ultraviolet-initiated graft polymerization (UV-GP) and photolithography. Poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA) patterns were grafted onto PDMS with micrometer-scale feature edge resolution. The morphology and chemical composition of the grafted layers were assessed by optical and atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and XPS imaging. AFM section analyses demonstrated the deposition of 33 +/- 1 and 62 +/- 8 nm thick patterned films of PAA and PMAA, respectively. Spatially resolved C 1s XPS provided images of carboxylic acid functionalities, verifying the patterned deposition of acrylate films on PDMS. These observations demonstrate the general usefulness of UV-GP and photolithography for micropatterning.