Chitosan-based films with alternative eco-friendly plasticizers: Preparation, physicochemical properties and stability.

Chitosan-based films modified with synthesized (propylene glycol monoacetate, propylene glycol esters of fatty acids, and epoxidized propylene glycol esters) and commercial eco-friendly plasticizers (epoxidized soybean oil and epoxidized palm oil) were prepared by a casting technique, with the aim to obtain environmentally friendly materials for packaging applications. To assess the applicability of alternative plasticizers, their properties were compared to the two most common plasticizers, i.e. glycerol and sorbitol. The chemical structure of newly synthesized plasticizers was verified by gas chromatography with mass detector, infrared spectroscopy and 1H NMR; and their acid, epoxy, iodine, and saponification values were determined. Plasticized chitosan-based films were characterized in terms of hydrophilic, barrier, thermal, mechanical properties, zeta potential and morphology, confirming their flexibility and homogeneity. The research confirmed that the alternative plasticizers introduced by us are more effective than commercially available ones, exhibiting lower hydrophilicity and superior mechanical properties compared to samples plasticized with traditional plasticizers. Moreover, these properties were found to be even better after ageing for 10 months.

Effective, Environmentally Friendly PVC Plasticizers Based on Succinic Acid.

The plasticizers used in this study were synthesized from renewable raw materials using succinic acid, oleic acid, and propylene glycol. Four environmentally friendly plasticizer samples were obtained; their chemical structures and compositions were confirmed by gas chromatography (GC) and infrared spectroscopy (FT-IR) analyses, and their physicochemical properties and thermal stability (TGA analysis) were investigated. The obtained ester mixtures were used as poly(vinyl chloride) (PVC) plasticizers and their plasticization efficiency was determined in comparison to traditional, commercially available phthalate plasticizers, such as DEHP (di(2-ethylhexyl phthalate) and DINP (diisononyl phthalate). Mechanical properties and migration resistance were determined for soft PVC with the use of three concentrations of plasticizers (40 PHR, 50 PHR, and 60 PHR). It was observed that the obtained plasticizers exhibited the same plasticization efficiency and were characterized with good mechanical and physical properties in comparison to commercial plasticizers. The tensile strength was approx. 19 MPa, while the elongation at break was approx. 250% for all tested plasticizers at a concentration of 50 PHR. Furthermore, plasticizer migration studies showed that the synthesized plasticizers had excellent resistance to plasticizer leaching. The best migration test result obtained was 70% lower than that for DEHP or DINP. The ester mixture that was found to be the most favorable plasticizer was characterized by good thermal and thermo-oxidative stability (5% weight loss temperature: 227.8 °C in air and 261.1 °C in nitrogen). The results of the research clearly indicate that the synthesized esters can provide a green alternative to toxic phthalate plasticizers.