Soft tissue response and determination of underlying risk drivers for recession and mucositis after AMSJI implantation in the maxilla.

PURPOSE: There are few treatment options for oral rehabilitation in patients with advanced maxillary resorption (Cawood-Howell Class V or more). Patient-specific, 3D-printed titanium subperiosteal implants have been described as a potentially valuable alternative solution. Surgeon and patient mediated functional outcomes have been studied and the results are promising. The surrounding soft tissue health has been much less researched. This study aims to evaluate the soft tissue response to the placement of additively manufactured subperiosteal jaw implants (AMSJI®) in the severely atrophic maxilla and to identify possible risk factors for soft tissue breakdown. MATERIALS AND METHODS: An international multicenter study was conducted and fifteen men (mean age 64.62 years, SD ± 6.75) and twenty-five women (mean age 65.24 years, SD ± 6.77) with advanced maxillary jaw resorption (Cawood-Howell Class V or more) were included in this study. General patient data were collected and all subjects were clinically examined. Inclusion criteria were patients who underwent bilateral AMSJI placement® in the maxilla at least a year before and whose surgeon and themselves agreed to participate in the study before their inclusion. RESULTS: A total of forty patients were enrolled with a mean follow-up period of 917 days (SD ± 306.89 days). Primary stability of the implant was achieved postoperatively in all cases, and all implants were loaded with a final prosthesis. At the time of study, only one patient showed mobility of the bilateral AMSJI (more than 1 mm). Exposure of the framework, due to mucosal recession, was seen in 26 patients (65%) and was mainly in the left (21.43%) and right (18.57%) mid-lateral region. Thin biotype and the presence of mucositis were found to be risk factors (p-value < 0.05). Although not significant, smokers had a nearly seven times (Odds ratio 6.88, p=0.08) more risk of developing a recession compared to nonsmokers. CONCLUSION: Twenty-six (65%) patients presented with a recession in one or (more) of the seven regions after oral rehabilitation with bilateral AMSJI installation. Several risk drivers were evaluated. The collapse of soft tissues around the AMSJI that led to caudal exposure of the arms was correlated with a thin biotype and the presence of mucositis.

Patient Satisfaction and Impact on Oral Health after Maxillary Rehabilitation Using a Personalized Additively Manufactured Subperiosteal Jaw Implant (AMSJI).

Subperiosteal implants (SIs) were first developed by Dahl in 1941 for oral rehabilitation in case of severe jaw atrophy. Over time, this technique was abandoned due to the high success rate of endosseous implants. The emergence of patient-specific implants and modern dentistry allowed a revisitation of this 80-year-old concept resulting in a novel "high-tech" SI implant. This study evaluates the clinical outcomes in forty patients after maxillary rehabilitation with an additively manufactured subperiosteal jaw implant (AMSJI®). The oral health impact profile-14 (OHIP-14) and numerical rating (NRS) scale were used to assess patient satisfaction and evaluate oral health. In total, fifteen men (mean age: 64.62 years, SD ± 6.75 years) and twenty-five women (mean age: 65.24 years, SD ± 6.77 years) were included, with a mean follow-up time of 917 days (SD ± 306.89 days) after AMSJI installation. Patients reported a mean OHIP-14 of 4.20 (SD ± 7.10) and a mean overall satisfaction based on the NRS of 52.25 (SD ± 4.00). Prosthetic rehabilitation was achieved in all patients. AMSJI is a valuable treatment option for patients with extreme jaw atrophy. Patients enjoy treatment benefits resulting in high patient satisfaction rates and impact on oral health.

Radiographic Evaluation of Bone Remodeling after Additively Manufactured Subperiosteal Jaw Implantation (AMSJI) in the Maxilla: A One-Year Follow-Up Study.

Additively manufactured subperiosteal jaw implants (AMSJI) are patient-specific, 3D-printed, titanium implants that provide an alternative solution for patients with severe maxillary bone atrophy. The aim of this study was to evaluate the bony remodeling of the maxillary crest and supporting bone using AMSJI. Fifteen patients with a Cawood-Howell Class V or greater degree of maxillary atrophy were evaluated using (cone beam) computed tomography scans at set intervals: one month (T1) and twelve months (T2) after definitive masticatory loading of bilateral AMSJI implants in the maxilla. The postoperative images were segmented and superimposed on the preoperative images. Fixed evaluation points were determined in advance, and surface comparison was carried out to calculate and visualize the effects of AMSJITM on the surrounding bone. A total mean negative bone remodeling of 0.26 mm (SD 0.65 mm) was seen over six reference points on the crest. Minor bone loss (mean 0.088 mm resorption, SD 0.29 mm) was seen at the supporting bone at the wings and basal frame. We conclude that reconstruction of the severely atrophic maxilla with the AMSJI results in minimal effect on supporting bone. Reduced stress shielding with a biomechanically tuned subperiosteal implant does not induce radiographically significant crestal bone atrophy.

Ceramic 3D-Printed Titanium Cranioplasty.

STUDY DESIGN: Inlay cranioplasties following partial craniectomy in tumor or trauma cases and onlay cranioplasties for reconstructions of residual developmental skull anomalies are frequently performed using CAD-CAM techniques. OBJECTIVE: In this case series, we present a novel cranial implant design, being a combination of 3D-printed titanium grade 23 and calcium phosphate paste (CeTi). METHODS: The titanium patient-specific implant, manufactured using selective laser melting, has a latticed border with interconnected micropores. The cranioplasty is miniscrew fixed and its border zone subsequently partially filled with calcium phosphate paste to promote osteoinduction and osteoconduction. From April 2017 to April 2019, 8 patients have been treated with such a CeTi implant. The inlay cranioplasties were each time revision surgeries of complicated cases. RESULTS: All implants were successful after a limited follow-up time (range 18-42 months). There were no dehiscences and no infections, and no complaints of thermal conduction. CONCLUSIONS: The proposed CeTi cranial implant combines the strength of titanium implants with the biological integration potential of ceramic implants and seems particularly resistant to infection, probably due to the biofunctionalized titanium surface and the antimicrobial activity of elevated intracellular free calcium levels.

[A man with a blue-black discolouration of the tongue]. / Een man met een blauw-zwarte tong.

A 75-year-old man was referred to our department because of discolouration of his tongue and an elevated CRP. Clinical examination did not reveal any other abnormalities. Blood examination showed an excessive amount of leukocytes with low platelet and erythrocyte counts. These findings indicated an atypical presentation of acute myeloid leukaemia.

Bone-anchored maxillary protraction to correct a class III skeletal relationship: A multicenter retrospective analysis of 218 patients.

This study evaluated the impact of class III correction by elastic traction on four miniplates and the failure rate of bone-anchored miniplates in nonsyndromic patients. A total of 218 patients (112 males and 106 females; average 11.4 years), treated by 38 orthodontists, received four miniplates (total 872 miniplates) from 2008 to 2016 at three maxillofacial centers in two countries. Factors affecting the success and failure of the miniplates were retrospectively examined and skeletal changes on cephalometric radiographs examined for 52 patients. Elastic traction was performed for 22.9 months, on average. The miniplate survival rate was 93.6%; 25.7% of the patients suffered failure of one of the miniplates. Postoperative antibiotics and placement of the neck of the miniplate in the attached gingiva significantly improved the success rate. Miniplate failure was six times higher in the maxilla and occurred more in younger patients. Self-drilling screws were significantly better than self-tapping screws for fixing the miniplate. Small cephalometric changes were seen: SNA (+1.9°), SNB (+0.4°), ANB (+1.4°), Wits analysis (+1.3 mm). In conclusion, bone-anchored maxillary protraction on four miniplates is an effective method for correcting a class III relationship, but has less skeletal effect than previously reported in the literature.

Complications of the retromandibular transparotid approach for low condylar neck and subcondylar fractures: a retrospective study.

OBJECTIVES: The goal of this study was to evaluate the rates of complications, morbidity, and safety with the transparotid approach. MATERIALS AND METHODS: A retrospective study was conducted and consisted of 53 surgically treated patients in the past five years for low condylar neck and subcondylar fractures. Only patients with malocclusion and who underwent open reduction with internal fixation with the retromandibular transparotid approach were included. The examined parameters were postoperative suboptimal occlusion, deflection, saliva fistula, and facial nerve weakness. RESULTS: Fifty-three patients had an open reduction with internal fixation on 55 sides (41 males, 77.4%; mean age, 42 years [range, 18-72 years]). Four patients (7.5%) experienced transient facial nerve weakness of the marginal mandibular branch, but none was permanent. Four patients had a salivary fistula, and 5 patients showed postoperative malocclusion, where one needed repeat surgery after one year. One patient showed long-term deflection. No other complications were observed. CONCLUSION: The retromandibular transparotid approach is a safe procedure for open reduction and internal fixation of low condylar neck and subcondylar fractures, and it has minimal complications.

Considerations in computer-aided design for inlay cranioplasty: technical note.

CONTEXT: Cranioplasty is a frequently performed procedure that uses a variety of reconstruction materials and techniques. In this technical note, we present refinements of computer-aided design-computer-aided manufacturing inlay cranioplasty. OBJECTIVE, DESIGN, AND SETTING: In an attempt to decrease complications related to polyether-ether-ketone (PEEK) cranioplasty, we gradually made changes to implant design and cranioplasty techniques. These changes include under-contouring of the implant and the use of segmented plates for large defects, microplate fixation for small temporal defects, temporal shell implants to reconstruct the temporalis muscle, and perforations to facilitate the drainage of blood and cerebrospinal fluid and serve as fixation points. RESULTS: From June 2016 to June 2017, 18 patients underwent cranioplasty, and a total of 31 PEEK and titanium implants were inserted. All implants were successful. CONCLUSIONS: These changes to implant design and cranioplasty techniques facilitate the insertion and fixation of patient-specific cranial implants and improve esthetic outcomes.

Three-dimensional position changes of the midface following Le Fort III advancement in syndromic craniosynostosis.

Little is known about the positional change of the Le Fort III segment following advancement. To study this, pre- and postoperative computed tomography scans of 18 craniosynosthosis patients were analyzed. The Le Fort III segment movement was measured by creating a reference coordinate system and by superpositioning the postoperative over the preoperative scan. On both the pre- and postoperative scans, four anatomical landmarks were marked: the most anterior point of the left and right foramen infraorbitale, the nasion, and the anterior nasal spine. A significant anterior movement of the four reference points was observed. No significant transversal differences were found. A significant difference between the anterior movement of the nasion and anterior nasal spine was found. In vertical dimension, there was a significant cranial movement of nasion in the study group. In addition, from all patients standardized lateral X-rays were viewed to determine the location and direction of force application that were linked to the outcomes of the three-dimensional movement of the nasion and anterior nasal spine (ANS) and the surgical technique. Conclusively, a significant advancement of the midface can be achieved with Le Fort III distraction osteogenesis in this specific patient group. Counterclockwise movement seemed to be the most dominant movement despite different modes of anchorage.

Upper airway changes in syndromic craniosynostosis patients following midface or monobloc advancement: correlation between volume changes and respiratory outcome.

In syndromic craniosynostosis patients, respiratory insufficiency may be a pressing indication to surgically increase the patency of the upper airway by midface or monobloc advancement. In this study the volume changes of the upper airway and the respiratory outcome following midface (Le Fort I or III) or monobloc advancement in ten syndromic craniosynostosis patients are evaluated. Pre- and postoperatively, the airway volume was measured using a semi-automatic region growing method. Respiratory data were correlated to the volume measurements. In nine patients the outcome of upper airway volume measurements correlated well to the respiratory outcome. Three of these patients showed a minimal airway volume gain or even volume loss, and no respiratory improvement was found. In one monobloc patient improvement of the respiratory outcome without an evident volume gain of the upper airway was found. The majority of patients with Le Fort III advancement showed respiratory improvement, which for the greater part correlated to the results of the volume analysis. In monobloc patients the respiratory outcomes and volume measurements were less obvious. Preoperative endoscopy of the upper airway is advocated to identify the level of obstruction in patients with residual obstructive sleep apnoea.

Orbital change following Le Fort III advancement in syndromic craniosynostosis: quantitative evaluation of orbital volume, infra-orbital rim and globe position.

Patients with syndromic craniosynostosis suffering from shallow orbits due to midface hypoplasia can be treated with a Le Fort III advancement osteotomy. This study evaluates the influence of Le Fort III advancement on orbital volume, position of the infra-orbital rim and globe. In pre- and post-operative CT-scans of 18 syndromic craniosynostosis patients, segmentation of the left and right orbit was performed and the infra-orbital rim and globe were marked. By superimposing the pre- and post-operative scans and by creating a reference coordinate system, movements of the infra-orbital rim and globe were assessed. Orbital volume increased significantly, by 27.2% for the left and 28.4% for the right orbit. Significant anterior movements of the left infra-orbital rim of 12.0mm (SD 4.2) and right infra-orbital rim of 12.8mm (SD 4.9) were demonstrated. Significant medial movements of 1.7mm (SD 2.2) of the left globe and 1.5mm (SD 1.9) of the right globe were demonstrated. There was a significant correlation between anterior infra-orbital rim movement and the increase in orbital volume. Significant orbital volume increase has been demonstrated following Le Fort III advancement. The position of the infra-orbital rim was moved forward significantly, whereas the globe position remained relatively unaffected.

Three-dimensional airway changes after Le Fort III advancement in syndromic craniosynostosis patients.

BACKGROUND: To investigate the changes of upper airway volume in syndromic craniosynostosis patients following Le Fort III advancement, computed tomographic scans were analyzed and related to the amount of advancement. METHODS: In this retrospective study, the preoperative and postoperative computed tomographic scans of 19 patients with syndromic craniosynostosis who underwent Le Fort III advancement were analyzed. In four cases, preoperative polysomnography demonstrated obstructive sleep apnea. The airway was segmented using a semiautomatic region growing method with a fixed Hounsfield threshold value. Airway volumes of hypopharynx and oropharynx (compartment A) and nasopharynx and nasal cavity (compartment B) were analyzed separately, as was the total airway volume. Advancement of the midface was recorded using lateral skull radiographs. Data were analyzed for all patients together and for patients with Crouzon/Pfeiffer and Apert syndromes separately. RESULTS: Airway volume increased significantly in compartment A (20 percent; p = 0.044) and compartment B (48 percent; p < 0.001), as did total airway volume in (37 percent; p < 0.001) in the total study group. No significant differences in volume changes were found comparing Apert with Crouzon/Pfeiffer patients. No distinct relation could be found between advancement of the midface and volume gain either in the total study group or in Apert and Crouzon/Pfeiffer patient groups separately. Postoperative polysomnography showed significant improvement of obstructive sleep apnea in all four patients. CONCLUSIONS: A significant improvement of the upper airway after Le Fort III advancement in syndromic craniosynostosis patients is demonstrated. No distinct relation could be observed between advancement and airway volume changes.

Internal carotid dissection after Le Fort III distraction in Apert syndrome: a case report.

A 10-year-old girl with Apert syndrome underwent a Le Fort III osteotomy with the positioning of internal and external distraction devices. The operation was straightforward with no intraoperative complications. Very soon after completion of surgery an anisocoria (unilateral dilation of a pupil) was noticed. This was followed by intracranial oedema which was fatal. The aetiology was dissection of the right internal carotid artery is reported. The complications of Le Fort osteotomies are discussed regarding patients with complex syndromal craniosynostosis and midface hypoplasia, such as Apert syndrome.

[A baby with a white lesion in the upper jaw]. / Een zuigeling met een molaar.

A 6-month-old girl had a floating molar due to Langerhans cell histiocytosis.

Riolan's arch: confusing, misnomer, and obsolete. A literature survey of the connection(s) between the superior and inferior mesenteric arteries.

BACKGROUND: There are 2 interpretations of Riolan's arch: (1) Riolan's arch is identical to a central part of the marginal artery (MA), connecting the superior (SMA) and the inferior mesenteric (IMA) arteries; and (2) Riolan's arch represents a rare artery, connecting the SMA and the IMA. The current review aims to emphasize the clinical importance of the colon's vasculature and to show the feasibility of abolishing the terms "Riolan's arch" and "meandering mesenteric artery." METHODS: A literature survey was performed. RESULTS: It appears that no distinct identity can be ascribed to Riolan's arch and that the "meandering mesenteric artery" represents an angiographically hypertrophied MA and/or the ascending branch of the left colic artery. However, a rare, centrally located, communicating artery has been described. Generally, the MA is sufficient for left colic circulation after ligation of the IMA, but at the splenic flexure, patency of the ascending branch of the left colic artery can be primordial. CONCLUSION: As connections between the SMA and the IMA can be adequately described using structures mentioned in Terminologica Anatomica, the terms "Riolan's arch" and "meandering mesenteric artery" should be abolished.

Creep behavior of commonly used suture materials in abdominal wall surgery.

BACKGROUND: The incidence of incisional hernia after abdominal wall closure is high. Furthermore, recurrence is a significant complication after correction of all abdominal wall hernias. Besides surgeon- and patient-related factors, in this experimental study a third factor, i.e., creep behavior of suture materials, is introduced and evaluated. MATERIALS AND METHODS: Creep measurements were performed on 0 and 2-0 Prolene (Ethicon, Johnson & Johnson Intl., Somerville, NJ) and 1 and 2-0 PDSII (Ethicon, Johnson & Johnson Intl.) sutures. Two different loads were used representing normal intra-abdominal pressure (IAP) and pathological IAP. A mean percentage of elongation was calculated for each type of suture material. Statistical analysis was performed using analysis of variance. RESULTS: All suture materials showed significant (3-51%) creep behavior. Prolene sutures showed more creep than PDSII sutures in both loading conditions. CONCLUSIONS: As significant creep was demonstrated for commonly used suture materials, creep might be a significant influential factor with regard to the etiology of incisional hernias and recurrence after abdominal wall hernia repair.

Tissue engineering and wound healing: an overview of the past, present, and future.

 Tissue engineering is described as the application of principles and methods of engineering and biology toward fundamental understanding of structure-function relationships in normal and pathological mammalian tissue. With this in mind, interest in applying tissue engineering in the evolving field of wound healing arose in the nineties of the previous century. This review provides an overview of the history and technique of tissue engineering, current wound healing related research, description of available tissue-engineered wound dressings, and future challenges.