Particulate emissions from L-Category vehicles towards Euro 5.

The current experimental study presents particulate emissions from 30 Euro 1-4 L-category vehicles (i.e. 2-, 3- and 4-wheelers such as mopeds, motorcycles, quads and minicars, registered in Europe between 2009 and 2016) tested on a chassis dynamometer. The objectives were to identify those sub-categories with high emissions, to assess whether the measures prescribed in the Euro 5 legislation will effectively control particulate emissions and finally to investigate the need for additional measures. The results showed that 2-stroke (2S) mopeds and diesel minicars comprised the vehicles with the highest particulate mass (PM) and solid particle number above 23 nm (SPN23) emissions (up to 64 mg/km and 4.5 × 1013 km-1, respectively). It is uncertain whether the installation of diesel particulate filters (DPF) is a cost-effective measure for diesel mini-cars in order to comply with Euro 5 standard, while advanced emission controls will be required for 2S mopeds, if such vehicles remain competitive for Euro 5. Regarding 4-stroke mopeds, motorcycles and quads, PM emissions were one order of magnitude lower than 2S ones and already below the Euro 5 limit. Nevertheless, SPN23 emissions from these sub-categories were up to 5 times higher than the Euro 6 passenger cars limit (6 × 1011 km-1). Even recent Euro 4 motorcycles exceeded this limit by up to 3 times. These results indicate that L-category vehicles are a significant contributor to vehicular particulate emissions and should be further monitored during and after the introduction of the Euro 5 step. Moreover, including SPN in the range 10-23 nm increases emission levels by up to 2.4 times compared to SPN23, while volatile and semi-volatile particle numbers were even higher. Finally, cold engine operation was found to be a significant contributor on SPN23 emissions, especially for vehicles with lower overall emission levels. These results indicate that a specific particle number limit may be required for L-category to align emissions with passenger cars.

Decision support system for the evaluation of urban air pollution control options: application for particulate pollution in Thessaloniki, Greece.

Development of strategies to control urban air pollution is a complex and multi-disciplinary process involving a wide range of scientists with different expertise and interests. This paper presents an integrated assessment methodological scheme for the evaluation of air pollution control measures that are put forward in order to reduce sufficiently air pollution levels in urban areas. Forming long-term, efficient air pollution control strategies requires knowledge of the costs associated with their implementation, the emission inventories and emission reductions to be achieved, as well as the concentration variations that represent air quality levels in the area examined. In contrast to the majority of the currently employed assessment approaches, the presented scheme enables the evaluation of any proposed air pollution control option in terms of its combined impact on air quality and social welfare, by correlating economic and health impact assessment issues. The approach presented in this paper brings together air quality modelling and mathematical programming techniques and provides a decision support system for the determination of optimal bundles of air pollution control options according to the particular features and needs of the areas examined. Both cost-effectiveness and cost-benefit approaches are taken into account in order to put the problem on the basis of economic efficiency from a societal perspective. The methodology is implemented for the case of Thessaloniki, Greece, which is selected on the grounds that the area is considered as one of the most polluted--if not the most polluted--cities within Europe, especially with respect to airborne particles.