A 3D-Printed Dummy for Training Distal Phalanx Amputation in Mice.

The development of realistic dummies for training the distal phalanx amputation (DPA) technique in mouse pups is a promising alternative to reduce and replace animals in training for research and teaching. To test this, we obtained micro-CT data from postnatal day-five mouse pups, meticulously segmented them, and converted them into a 3D mesh format suitable for 3D printing. Once the dummy was printed, it was evaluated during actual training courses in two different groups: in the first group, users received no dummies to train the DPA, and in the second group, users were trained with three dummies. To assess the effectiveness of the dummy, we conducted a survey followed by an expert veterinarian evaluation. Our results showed that DPA is a complex procedure, and it is commonly poorly performed. When implementing the dummies, users who were not provided with dummies to practice only had an 8.3% success rate in DPA, while users provided with three dummies had a 45.5% success rate, respectively. Despite additional research being needed, our dummy offered improved practical training by providing a safe and effective alternative in line with ethical considerations while demonstrating the feasibility of using 3D printing technology to promote the 3Rs in experimental research.

Development of a 3D simulator for training the mouse in utero electroporation.

In utero electroporation (IUE) requires high-level training in microinjection through the mouse uterine wall into the lateral ventricle of the mouse brain. Training for IUE is currently being performed in live mice as no artificial models allow simulations yet. This study aimed to develop an anatomically realistic 3D printed simulator to train IUE in mice. To this end, we created embryo models containing lateral ventricles. We coupled them to uterus models in six steps: (1) computed tomography imaging, (2) 3D model segmentation, (3) 3D model refinement, (4) mold creation to cast the actual model, (5) 3D mold printing, and (6) mold casting the molds with a mix of soft silicones to ensure the hardness and consistency of the uterus and embryo. The results showed that the simulator assembly successfully recreated the IUE. The compression test did not differ in the mechanical properties of the real embryo or in the required load for uterus displacement. Furthermore, more than 90% of the users approved the simulator as an introduction to IUE and considered that the simulator could help reduce the number of animals for training. Despite current limitations, our 3D simulator enabled a realistic experience for initial approximations to the IUE and is a real alternative for implementing the 3Rs. We are currently working on refining the model.

An experimental study on magnetic esophageal compression anastomosis in piglets.

INTRODUCTION: Fashioning a patent, watertight anastomosis in patients with esophageal atresia is a challenging task in pediatric surgery, particularly when performed under tension. A reproducible suture-less alternative would decrease operative time. We evaluated magnetic esophageal compression anastomoses in a novel bypass-loop swine model. METHODS: Eight-week-old piglets underwent thoracotomy to mobilize the esophagus at the carina to create a U-shaped loop. Custom-made 8 mm diameter Neodymium Magnets were inserted into the esophagus proximal and distal to the loop, then mated side-to-side at the future anastomosis site. Pigs were observed for 8 (n = 4), 10 (n = 6), and 12 (n = 2) days and then sacrificed. The magnetic compression anastomosis was evaluated macroscopically, by radiography, burst pressure testing, and histology. RESULTS: All 12 pigs survived until the endpoint. Separation of the magnets occurred at a median of 9 days. Contrast esophagrams showed patency and no leak. All anastomoses withstood pressures well over 13 kPa without leak. Histopathology showed epithelialized circular scar tissue. CONCLUSION: Magnetic compression anastomoses of the esophagus using our specially-designed magnets are formed between the 8th and 10th postoperative day, are patent and mechanically resistant to supraphysiologic intraluminal pressures. These data lay the basis for a potential clinical application in patients born with esophageal atresia. LEVEL OF EVIDENCE: Not applicable (experimental animal study).