Structure and bonding in rhodium coordination compounds: a 103Rh solid-state NMR and relativistic DFT study.

This study demonstrates the application of 103Rh solid-state NMR (SSNMR) spectroscopy to inorganic and organometallic coordination compounds, in combination with relativistic density functional theory (DFT) calculations of 103Rh chemical shift tensors and their analysis with natural bond orbital (NBO) and natural localized molecular orbital (NLMO) protocols, to develop correlations between 103Rh chemical shift tensors, molecular structure, and Rh-ligand bonding. 103Rh is one of the least receptive NMR nuclides, and consequently, there are very few reports in the literature. We introduce robust 103Rh SSNMR protocols for stationary samples, which use the broadband adiabatic inversion-cross polarization (BRAIN-CP) pulse sequence and wideband uniform-rate smooth-truncation (WURST) pulses for excitation, refocusing, and polarization transfer, and demonstrate the acquisition of 103Rh SSNMR spectra of unprecedented signal-to-noise and uniformity. The 103Rh chemical shift tensors determined from these spectra are complemented by NBO/NLMO analyses of contributions of individual orbitals to the 103Rh magnetic shielding tensors to understand their relationship to structure and bonding. Finally, we discuss the potential for these experimental and theoretical protocols for investigating a wide range of materials containing the platinum group elements.

Unlocking Li superionic conductivity in face-centred cubic oxides via face-sharing configurations.

Oxides with a face-centred cubic (fcc) anion sublattice are generally not considered as solid-state electrolytes as the structural framework is thought to be unfavourable for lithium (Li) superionic conduction. Here we demonstrate Li superionic conductivity in fcc-type oxides in which face-sharing Li configurations have been created through cation over-stoichiometry in rocksalt-type lattices via excess Li. We find that the face-sharing Li configurations create a novel spinel with unconventional stoichiometry and raise the energy of Li, thereby promoting fast Li-ion conduction. The over-stoichiometric Li-In-Sn-O compound exhibits a total Li superionic conductivity of 3.38 × 10-4 S cm-1 at room temperature with a low migration barrier of 255 meV. Our work unlocks the potential of designing Li superionic conductors in a prototypical structural framework with vast chemical flexibility, providing fertile ground for discovering new solid-state electrolytes.

Single-source formation and assessment of nitrogen-doped graphitic spheres for lithium- and sodium-ion batteries.

Optimisation of the annealing time for the fabrication of nitrogen-doped graphitic-spheres (NDGSs), formed from a nitrogen-functionalised aromatic precursor at 800 °C, to give high nitrogen doping has been performed. Thorough analysis of the NDGSs, approximately 3 µm in diameter, pinpointed an optimum annealing time of 6 to 12 hours to obtain highest nitrogen content at the surface of the spheres (reaching a stoichiometry of around C3N at the surface and C9N in the bulk), with the quantity of sp2 and sp3 surface nitrogen varying with annealing time. The results suggest that changes in the nitrogen dopant level occur through slow diffusion of the nitrogen throughout the NDGSs, along with reabsorption of nitrogen-based gases produced during annealing. A stable bulk nitrogen dopant level of 9% was revealed in the spheres. The NDGSs performed well as anodes in lithium-ion batteries, providing a capacity of up to 265 mA h g-1 at a charging rate of C/20, but did not perform well in sodium-ion batteries without the use of diglyme, consistent with the presence of graphitic regions, but with low internal porosity.

Quantifying Dissolved Transition Metals in Battery Electrolyte Solutions with NMR Paramagnetic Relaxation Enhancement.

Transition metal dissolution is an important contributor to capacity fade in lithium-ion cells. NMR relaxation rates are proportional to the concentration of paramagnetic species, making them suitable to quantify dissolved transition metals in battery electrolytes. In this work, 7Li, 31P, 19F, and 1H longitudinal and transverse relaxation rates were measured to study LiPF6 electrolyte solutions containing Ni2+, Mn2+, Co2+, or Cu2+ salts and Mn dissolved from LiMn2O4. Sensitivities were found to vary by nuclide and by transition metal. 19F (PF6-) and 1H (solvent) measurements were more sensitive than 7Li and 31P measurements due to the higher likelihood that the observed species are in closer proximity to the metal center. Mn2+ induced the greatest relaxation enhancement, yielding a limit of detection of ∼0.005 mM for 19F and 1H measurements. Relaxometric analysis of a sample containing Mn dissolved from LiMn2O4 at ∼20 °C showed good sensitivity and accuracy (suggesting dissolution of Mn2+), but analysis of a sample stored at 60 °C showed that the relaxometric quantification is less accurate for heat-degraded LiPF6 electrolytes. This is attributed to degradation processes causing changes to the metal solvation shell (changing the fractions of PF6-, EC, and EMC coordinated to Mn2+), such that calibration measurements performed with pristine electrolyte solutions are not applicable to degraded solutions-a potential complication for efforts to quantify metal dissolution during operando NMR studies of batteries employing widely-used LiPF6 electrolytes. Ex situ nondestructive quantification of transition metals in lithium-ion battery electrolytes is shown to be possible by NMR relaxometry; further, the method's sensitivity to the metal solvation shell also suggests potential use in assessing the coordination spheres of dissolved transition metals.

Triarylamines as Catholytes in Aqueous Organic Redox Flow Batteries.

A series of triarylamines was synthesised and screened for their suitability as catholytes in redox flow batteries using cyclic voltammetry (CV). Tris(4-aminophenyl)amine was found to be the strongest candidate. Solubility and initial electrochemical performance were promising; however, polymerisation was observed during electrochemical cycling leading to rapid capacity fade prescribed to a loss of accessible active material and the limitation of ion transport processes within the cell. A mixed electrolyte system of H3 PO4 and HCl was found to inhibit polymerisation producing oligomers that consumed less active material reducing rates of degradation in the redox flow battery. Under these conditions Coulombic efficiency improved by over 4 %, the maximum number of cycles more than quadrupled and an additional theoretical capacity of 20 % was accessed. This paper is, to our knowledge, the first example of triarylamines as catholytes in all-aqueous redox flow batteries and emphasises the impact supporting electrolytes can have on electrochemical performance.

Onset Potential for Electrolyte Oxidation and Ni-Rich Cathode Degradation in Lithium-Ion Batteries.

High-capacity Ni-rich layered metal oxide cathodes are highly desirable to increase the energy density of lithium-ion batteries. However, these materials suffer from poor cycling performance, which is exacerbated by increased cell voltage. We demonstrate here the detrimental effect of ethylene carbonate (EC), a core component in conventional electrolytes, when NMC811 (LiNi0.8Mn0.1Co0.1O2) is charged above 4.4 V vs Li/Li+-the onset potential for lattice oxygen release. Oxygen loss is enhanced by EC-containing electrolytes-compared to EC-free-and correlates with more electrolyte oxidation/breakdown and cathode surface degradation, which increase concurrently above 4.4 V. In contrast, NMC111 (LiNi0.33Mn0.33Co0.33O2), which does not release oxygen up to 4.6 V, shows a similar extent of degradation irrespective of the electrolyte. This work highlights the incompatibility between conventional EC-based electrolytes and Ni-rich cathodes (more generally, cathodes that release lattice oxygen such as Li-/Mn-rich and disordered rocksalt cathodes) and motivates further work on wider classes of electrolytes and additives.

Sodium Borates: Expanding the Electrolyte Selection for Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) are a promising grid-level storage technology due to the abundance and low cost of sodium. The development of new electrolytes for SIBs is imperative since it impacts battery life and capacity. Currently, sodium hexafluorophosphate (NaPF6 ) is used as the benchmark salt, but is highly hygroscopic and generates toxic HF. This work describes the synthesis of a series of sodium borate salts, with electrochemical studies revealing that Na[B(hfip)4 ]⋅DME (hfip=hexafluoroisopropyloxy, Oi PrF ) and Na[B(pp)2 ] (pp=perfluorinated pinacolato, O2 C2 (CF3 )4 ) have excellent electrochemical performance. The [B(pp)2 ]- anion also exhibits a high tolerance to air and water. Both electrolytes give more stable electrode-electrolyte interfaces than conventionally used NaPF6 , as demonstrated by impedance spectroscopy and cyclic voltammetry. Furthermore, they give greater cycling stability and comparable capacity to NaPF6 for SIBs, as shown in commercial pouch cells.

Electrolyte Reactivity at the Charged Ni-Rich Cathode Interface and Degradation in Li-Ion Batteries.

The chemical and electrochemical reactions at the positive electrode-electrolyte interface in Li-ion batteries are hugely influential on cycle life and safety. Ni-rich layered transition metal oxides exhibit higher interfacial reactivity than their lower Ni-content analogues, reacting via mechanisms that are poorly understood. Here, we study the pivotal role of the electrolyte solvent, specifically cyclic ethylene carbonate (EC) and linear ethyl methyl carbonate (EMC), in determining the interfacial reactivity at charged LiNi0.33Mn0.33Co0.33O2 (NMC111) and LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes by using both single-solvent model electrolytes and the mixed solvents used in commercial cells. While NMC111 exhibits similar parasitic currents with EC-containing and EC-free electrolytes during high voltage holds in NMC/Li4Ti5O12 (LTO) cells, this is not the case for NMC811. Online gas analysis reveals that the solvent-dependent reactivity for Ni-rich cathodes is related to the extent of lattice oxygen release and accompanying electrolyte decomposition, which is higher for EC-containing than EC-free electrolytes. Combined findings from electrochemical impedance spectroscopy (EIS), TEM, solution NMR, ICP, and XPS reveal that the electrolyte solvent has a profound impact on the degradation of the Ni-rich cathode and the electrolyte. Higher lattice oxygen release with EC-containing electrolytes is coupled with higher cathode interfacial impedance, a thicker oxygen-deficient rock-salt surface reconstruction layer, more electrolyte solvent and salt breakdown, and higher amounts of transition metal dissolution. These processes are suppressed in the EC-free electrolyte, highlighting the incompatibility between Ni-rich cathodes and conventional electrolyte solvents. Finally, new mechanistic insights into the chemical oxidation pathways of electrolyte solvents and, critically, the knock-on chemical and electrochemical reactions that further degrade the electrolyte and electrodes curtailing battery lifetime are provided.

Structural and Dynamic Disorder, Not Ionic Trapping, Controls Charge Transport in Highly Doped Conducting Polymers.

Doped organic semiconductors are critical to emerging device applications, including thermoelectrics, bioelectronics, and neuromorphic computing devices. It is commonly assumed that low conductivities in these materials result primarily from charge trapping by the Coulomb potentials of the dopant counterions. Here, we present a combined experimental and theoretical study rebutting this belief. Using a newly developed doping technique based on ion exchange, we prepare highly doped films with several counterions of varying size and shape and characterize their carrier density, electrical conductivity, and paracrystalline disorder. In this uniquely large data set composed of several classes of high-mobility conjugated polymers, each doped with at least five different ions, we find electrical conductivity to be strongly correlated with paracrystalline disorder but poorly correlated with ionic size, suggesting that Coulomb traps do not limit transport. A general model for interacting electrons in highly doped polymers is proposed and carefully parametrized against atomistic calculations, enabling the calculation of electrical conductivity within the framework of transient localization theory. Theoretical calculations are in excellent agreement with experimental data, providing insights into the disorder-limited nature of charge transport and suggesting new strategies to further improve conductivities.

Toward an Understanding of SEI Formation and Lithium Plating on Copper in Anode-Free Batteries.

"Anode-free" batteries present a significant advantage due to their substantially higher energy density and ease of assembly in a dry air atmosphere. However, issues involving lithium dendrite growth and low cycling Coulombic efficiencies during operation remain to be solved. Solid electrolyte interphase (SEI) formation on Cu and its effect on Li plating are studied here to understand the interplay between the Cu current collector surface chemistry and plated Li morphology. A native interphase layer (N-SEI) on the Cu current collector was observed with solid-state nuclear magnetic resonance spectroscopy (ssNMR) and electrochemical impedance spectroscopy (EIS). Cyclic voltammetry (CV) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) studies showed that the nature of the N-SEI is affected by the copper interface composition. An X-ray photoelectron spectroscopy (XPS) study identified a relationship between the applied voltage and SEI composition. In addition to the typical SEI components, the SEI contains copper oxides (Cu x O) and their reduction reaction products. Parasitic electrochemical reactions were observed via in situ NMR measurements of Li plating efficiency. Scanning electron microscopy (SEM) studies revealed a correlation between the morphology of the plated Li and the SEI homogeneity, current density, and rest time in the electrolyte before plating. Via ToF-SIMS, we found that the preferential plating of Li on Cu is governed by the distribution of ionically conducting rather than electronic conducting compounds. The results together suggest strategies for mitigating dendrite formation by current collector pretreatment and controlled SEI formation during the first battery charge.

New Route to Battery Grade NaPF6 for Na-Ion Batteries: Expanding the Accessible Concentration.

Sodium-ion batteries represent a promising alternative to lithium-ion systems. However, the rapid growth of sodium-ion battery technology requires a sustainable and scalable synthetic route to high-grade sodium hexafluorophosphate. This work demonstrates a new multi-gram scale synthesis of NaPF6 in which the reaction of ammonium hexafluorophosphate with sodium metal in THF solvent generates the electrolyte salt with the absence of the impurities that are common in commercial material. The high purity of the electrolyte (absence of insoluble NaF) allows for concentrations up to 3 M to be obtained accurately in binary carbonate battery solvent. Electrochemical characterization shows that the degradation dynamics of sodium metal-electrolyte interface are different for more concentrated (>2 M) electrolytes, suggesting that the higher concentration regime (above the conventional 1 M concentration) may be beneficial to battery performance.

Formulation of Metal-Organic Framework-Based Drug Carriers by Controlled Coordination of Methoxy PEG Phosphate: Boosting Colloidal Stability and Redispersibility.

Metal-organic framework nanoparticles (nanoMOFs) have been widely studied in biomedical applications. Although substantial efforts have been devoted to the development of biocompatible approaches, the requirement of tedious synthetic steps, toxic reagents, and limitations on the shelf life of nanoparticles in solution are still significant barriers to their translation to clinical use. In this work, we propose a new postsynthetic modification of nanoMOFs with phosphate-functionalized methoxy polyethylene glycol (mPEG-PO3) groups which, when combined with lyophilization, leads to the formation of redispersible solid materials. This approach can serve as a facile and general formulation method for the storage of bare or drug-loaded nanoMOFs. The obtained PEGylated nanoMOFs show stable hydrodynamic diameters, improved colloidal stability, and delayed drug-release kinetics compared to their parent nanoMOFs. Ex situ characterization and computational studies reveal that PEGylation of PCN-222 proceeds in a two-step fashion. Most importantly, the lyophilized, PEGylated nanoMOFs can be completely redispersed in water, avoiding common aggregation issues that have limited the use of MOFs in the biomedical field to the wet form-a critical limitation for their translation to clinical use as these materials can now be stored as dried samples. The in vitro performance of the addition of mPEG-PO3 was confirmed by the improved intracellular stability and delayed drug-release capability, including lower cytotoxicity compared with that of the bare nanoMOFs. Furthermore, z-stack confocal microscopy images reveal the colocalization of bare and PEGylated nanoMOFs. This research highlights a facile PEGylation method with mPEG-PO3, providing new insights into the design of promising nanocarriers for drug delivery.

Dynamics of a [2]rotaxane wheel in a crystalline molecular solid.

An H-shaped [2]rotaxane comprising a bis(benzimidazole) axle and a 24-membered crown ether wheel appended with four trityl groups forms a highly crystalline material with enough free volume to allow large amplitude motion of the interlocked macrocycle. Variable-temperature (VT) 2H solid-state nuclear magnetic resonance (SSNMR) was used to characterize the dynamics of the [2]rotaxane wheel in this material.

Exploring the dynamics of Zr-based metal-organic frameworks containing mechanically interlocked molecular shuttles.

Zr(iv) metal-organic frameworks (MOFs) UiO-68 and PCN-57, containing triphenylene dicarboxylate (TPDC) and tetramethyl-triphenylene dicarboxylate (TTDC) linkers, respectively, were doped with an H-shaped tetracarboxylate linker that contains a [2]rotaxane molecular shuttle. The new MOFs, UWDM-8 and UWDM-9, contain a [2]rotaxane crossbar spanning the tetrahedral cavities of the fcu topology while the octahedral cavities remain empty. 13C solid-state NMR (SSNMR) spectra and solution 1H NMR spectra verified that the [2]rotaxanes were included as designed. Variable-temperature (VT) cross polarization (CP) magic-angle spinning (MAS) 13C SSNMR was used to explore the translational motion of the macrocyclic ring in both MOFs. The SSNMR results clearly show that the structure of the linker (TPDCvs.TTDC) affects the shuttling rate of the macrocyclic ring, although questions remain as to how rotation of the central phenylene unit of the strut might also affect the motion of the macrocycle.

Thermally Driven Dynamics of a Rotaxane Wheel about an Imidazolium Axle inside a Metal-Organic Framework.

A new mechanically interlocked molecular linker was prepared by using ring-closing metathesis (Grubbs I) to clip a [24]crown-6 ether wheel around an axle containing both Y-shaped diphenylimidazole and isophthalic acid groups. A metal-organic framework (MOF) material was prepared using this linker and ZnII ions. Single-crystal X-ray diffraction experiments showed that the MOF contains an imidazolium-based rotaxane linked by dimeric [Zn2 (NO3 )(DEF)] secondary building units (SBUs). Variable-temperature (VT), 2 H solid-state NMR spectroscopy was used to characterize the motion of the "soft" wheel component around the rigid "hard" lattice of the framework. At higher temperatures (above 150 °C), it was demonstrated that the 24-membered, macrocyclic ring of the MOF undergoes rapid, thermally driven rotation about the axle inside the voids of the lattice.

A Molecular Rotor Possessing an H-M-H "Spoke" on a P-M-P "Axle": A Platinum(II) trans-Dihydride Spins Rapidly Even at 75 K.

A new class of low-barrier molecular rotors, metal trans-dihydrides, is suggested here. To test whether rapid rotation can be achieved, the known complex trans-H2Pt(P(t)Bu3)2 was experimentally studied by (2)H and (195)Pt solid-state NMR spectroscopy (powder pattern changes with temperature) and computationally modeled as a (t)Bu3P-Pt-P(t)Bu3 stator with a spinning H-Pt-H rotator. Whereas the related chloro-hydride complex, trans-H(Cl)Pt(P(t)Bu3)2, does not show rotational behavior at room temperature, the dihydride trans-H2Pt(P(t)Bu3)2 rotates fast on the NMR time scale, even at low temperatures down to at least 75 K. The highest barrier to rotation is estimated to be ∼3 kcal mol(-1), for the roughly 3 Šlong rotator in trans-H2Pt(P(t)Bu3)2.

Mechanically Interlocked Linkers inside Metal-Organic Frameworks: Effect of Ring Size on Rotational Dynamics.

A series of metal-organic framework (MOF) materials has been prepared, each containing a mechanically interlocked molecule (MIM) as the linker and a copper(II) paddlewheel as the secondary building unit (SBU). The MIM linkers are [2]rotaxanes with varying sizes of crown ether macrocycles ([22]crown-6, 22C6; [24]crown-6, 24C6; [26]crown-6, 26C6; benzo[24]crown-6, B24C6) and an anilinium-based axle containing four carboxylate donor groups. Herein, the X-ray structures of MOFs UWCM-1 (no crown) and UWDM-1(22) are compared and demonstrate the effect of including a macrocycle around the axle of the linker. The rotaxane linkers are linear and result in nbo-type MOFs with void space that allows for motion of the interlocked macrocycle inside the MOF pores, while the macrocycle-free linker is bent and yields a MOF with a novel 12-connected bcc structure. Variable temperature (2)H solid-state nuclear magnetic resonance showed that the macrocycles in UWDM-1(22), UWDM-1(24), and UWDM-1(B24) undergo different degrees and rates of rotation depending on the size and shape of the macrocycle.

A molecular shuttle that operates inside a metal-organic framework.

A 'molecular shuttle' is an interlocked molecular assembly in which a macrocyclic ring is able to move back and forth between two recognition sites. This large-amplitude translational motion was first characterized in solution in 1991. Since that report, many mechanically interlocked molecules (MIMs) have been designed, synthesized and shown to mimic the complex functions of macroscopic switches and machines. Here, we show that this fundamental concept-the translational motion of a molecular shuttle-can be organized, initiated and made to operate inside a crystalline, solid-state material. A metal-organic framework (MOF) designated UWDM-4 was prepared that contains a rigid linker that is a molecular shuttle. It was demonstrated by variable-temperature (1)H-(13)C cross-polarization/magic-angle spinning (CP/MAS) and (13)C 2D exchange correlation spectroscopy (EXSY) solid-state NMR at 21.1 T on a (13)C-enriched sample that the macrocyclic ring undergoes rapid shuttling along the rigid axle built between struts of the framework.

An investigation of chlorine ligands in transition-metal complexes via ³5Cl solid-state NMR and density functional theory calculations.

Chlorine ligands in a variety of diamagnetic transition-metal (TM) complexes in common structural motifs were studied using (35)Cl solid-state NMR (SSNMR), and insight into the origin of the observed (35)Cl NMR parameters was gained through first-principles density functional theory (DFT) calculations. The WURST-CPMG pulse sequence and the variable-offset cumulative spectrum (VOCS) methods were used to acquire static (35)Cl SSNMR powder patterns at both standard (9.4 T) and ultrahigh (21.1 T) magnetic field strengths, with the latter affording higher signal-to-noise ratios (S/N) and reduced experimental times (i.e., <1 h). Analytical simulations were performed to extract the (35)Cl electric field gradient (EFG) tensor and chemical shift (CS) tensor parameters. It was found that the chlorine ligands in various bonding environments (i.e., bridging, terminal-axial, and terminal-equatorial) have drastically different (35)Cl EFG tensor parameters, suggesting that (35)Cl SSNMR is ideal for characterizing chlorine ligands in TM complexes. A detailed localized molecular orbital (LMO) analysis was completed for NbCl5. It was found that the contributions of individual molecular orbitals must be considered to fully explain the observed EFG parameters, thereby negating simple arguments based on comparison of bond lengths and angles. Finally, we discuss the application of (35)Cl SSNMR for the structural characterization of WCl6 that has been grafted onto a silica support material. The resulting tungsten-chloride surface species is shown to be structurally distinct from the parent compound.