Insight into the interaction of quinizarin with SDS micelles - effects of additives.

Association behavior between quinizarin (1,4-dihydroxyanthraquinone), an analogue of the chromophore of anthracycline anticancer drugs and sodium dodecyl sulfate (SDS) micelles in the presence of glucose, NaCl and urea additives was studied using absorption spectroscopy and conductometric techniques. The spectral results indicate an increase of binding constant and partition coefficient values in the presence of glucose and NaCl whereas the addition of urea leads to a decrease of binding strength and quinizarin partitioning into SDS micelles. Thus, the rise of NaCl and glucose concentrations is favorable for the quinizarin distribution into SDS micelles. From electrical conductivity measurements it was found that the critical micelle concentration (CMC) of SDS/quinizarin system decreases by adding NaCl and glucose whereas urea has not influence on the micelization process at the concentrations used in the present study. Since biologically compounds like glucose, NaCl and urea are found in the human body, the attained outcomes can be important in finding of effective drug delivery systems.

Synergistic Antioxidant Activity and Enhanced Stability of Curcumin Encapsulated in Vegetal Oil-Based Microemulsion and Gel Microemulsions.

Curcumin, due to its antioxidant, antibacterial, anti-inflammatory, and antitumoral activity, has attracted huge attention in applications in many fields such as pharmacy, medicine, nutrition, cosmetics, and biotechnology. The stability of curcumin-based products and preservation of antioxidant properties are still challenges in practical applications. Stability and antioxidant properties were studied for curcumin encapsulated in O/W microemulsion systems and three related gel microemulsions. Only biodegradable and biocompatible ingredients were used for carriers: grape seed oil as oily phase, Tween 80, and Plurol® Diisostearique CG as a surfactant mix, and ethanol as a co-solvent. For the gel microemulsions, water-soluble polymers, namely Carbopol® 980 NF, chitosan, and sodium hyaluronate were used. The influence of UVC irradiation and heat treatment on the degradation kinetics of curcumin in the formulations was studied. Because of the antioxidant character of the microemulsion oily phase, the possibility of a synergistic effect between grape seed oil and curcumin was explored. In this study, the high efficiency of the studied drug delivery systems to ensure protection from external degradative factors was confirmed. Also, the influence of the encapsulation in microemulsion and derived gel microemulsion systems on the antioxidant capacity curcumin was studied, and a synergistic effect with vegetal oil was demonstrated.

Facile In Situ Synthesis of ZnO Flower-like Hierarchical Nanostructures by the Microwave Irradiation Method for Multifunctional Textile Coatings.

ZnO nanoparticle-based multifunctional coatings were prepared by a simple, time-saving microwave method. Arginine and ammonia were used as precipitation agents, and zinc acetate dehydrate was used as a zinc precursor. Under the optimized conditions, flower-like morphologies of ZnO aggregates were obtained. The prepared nanopowders were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and UV/Visible spectroscopy. The developed in situ synthesis with microwave irradiation enabled significant ZnO nanoparticle deposition on cotton fabrics, without additional steps. The functionalized textiles were tested as a photocatalyst in methylene blue (MB) photodegradation and showed good self-cleaning and UV-blocking properties. The coated cotton fabrics exhibited good antibacterial properties against common microbial trains (Staphylococcus aureus, Escherichia coli, and Candida albicans), together with self-cleaning and photocatalytic efficiency in organic dye degradation. The proposed microwave-assisted in situ synthesis of ZnO nanocoatings on textiles shows high potential as a rapid, efficient, environmentally friendly, and scalable method to fabricate functional fabrics.

Mixed Pluronic-Cremophor Polymeric Micelles as Nanocarriers for Poorly Soluble Antibiotics-The Influence on the Antibacterial Activity.

In this work, novel polymeric mixed micelles from Pluronic F127 and Cremophor EL were investigated as drug delivery systems for Norfloxacin as model antibiotic drug. The optimal molar ratio of surfactants was determined, in order to decrease critical micellar concentration (CMC) and prepare carriers with minimal surfactant concentrations. The particle size, zeta potential, and encapsulation efficiency were determined for both pure and mixed micelles with selected composition. In vitro release kinetics of Norfloxacin from micelles show that the composition of surfactant mixture generates tunable extended release. The mixed micelles exhibit good biocompatibility against normal fibroblasts MRC-5 cells, while some cytotoxicity was found in all micellar systems at high concentrations. The influence of the surfactant components in the carrier on the antibacterial properties of Norfloxacin was investigated. The drug loaded mixed micellar formulation exhibit good activity against clinical isolated strains, compared with the CLSI recommended standard strains (Staphylococcus aureus ATCC 25923, Enterococcus faecalis ATCC 29213, Pseudomonas aeruginosa ATCC 27853, Escherichia coli ATCC 25922). P. aeruginosa 5399 clinical strain shows low sensitivity to Norfloxacin in all tested micelle systems. The results suggest that Cremophor EL-Pluronic F127 mixed micelles can be considered as novel controlled release delivery systems for hydrophobic antimicrobial drugs.

Antibacterial and Photocatalytic Properties of ZnO Nanoparticles Obtained from Chemical versus Saponaria officinalis Extract-Mediated Synthesis.

In the present work, the properties of ZnO nanoparticles obtained using an eco-friendly synthesis (biomediated methods in microwave irradiation) were studied. Saponaria officinalis extracts were used as both reducing and capping agents in the green nanochemistry synthesis of ZnO. Inorganic zinc oxide nanopowders were successfully prepared by a modified hydrothermal method and plant extract-mediated method. The influence of microwave irradiation was studied in both cases. The size, composition, crystallinity and morphology of inorganic nanoparticles (NPs) were investigated using dynamic light scattering (DLS), powder X-ray diffraction (XRD), SEM-EDX microscopy. Tunings of the nanochemistry reaction conditions (Zn precursor, structuring agent), ZnO NPs with various shapes were obtained, from quasi-spherical to flower-like. The optical properties and photocatalytic activity (degradation of methylene blue as model compound) were also investigated. ZnO nanopowders' antibacterial activity was tested against Gram-positive and Gram-negative bacterial strains to evidence the influence of the vegetal extract-mediated synthesis on the biological activity.

Study of Quinizarin Interaction with SDS Micelles as a Model System for Biological Membranes.

Investigation of the interaction of quinizarin (Q), an analogue of the core unit of different anticancer drugs, with anionic SDS micelles has been performed by absorption and conductance measurements in 0.1 M phosphate buffer, pH 7.4 and over the temperature range of 298.15-323.15 K. The values of binding constant (Kb), partition coefficient (Kx) and the corresponding thermodynamic parameters (Gibbs free energy, enthalpy, entropy) for the binding and distribution of quinizarin between the bulk aqueous solution and surfactant micelles have been determined and discussed in terms of possible intermolecular interactions. Values of critical micelle concentration (CMC) and degree of ionization (?) for SDS in the absence and the presence of quinizarin have been evaluated from conductometric study. Comparing the absorption spectra of quinizarin in SDS micelles with the spectra in different solvents revealed that quinizarin molecules are located in the hydrophilic region of SDS micelles. The trend of changes in Gibbs free energy, enthalpy and entropy with temperature shows that both binding and partition processes are spontaneous and entropy driven. In addition, the hydrophobic interactions are the main forces involved in binding and partition processes.

Photocatalytic degradation of dichlorvos in aqueous TiO2 suspensions.

INTRODUCTION: In the present work, we explored the kinetics of dichlorvos (2,2-dichlorvinyl dimethyl phosphate, DDVP) decay through UV-A light-induced TiO(2) photocatalysis at pH 4 and 9, and the formation of degradation intermediates and final products under specific experimental conditions. Experimental observations and theoretical considerations allowed us to suggest the degradation mechanism of DDVP by the UV/TiO(2) process in aqueous solution. METHODS: The irradiation experiments were carried out in a photoreactor using a 228-W medium-pressure Hg vapor lamp. The concentration of DDVP, phosphate ion and formaldehyde as reaction intermediate, are determined spectrophotometrically. Chloride ion concentration was measured potentiometrically. RESULTS: The photocatalytic degradation rate of dichlorvos (DDVP) under UV irradiation (360-380 nm) was optimized with respect to the flow rate of O(2) gas sparged into the solution and photocatalyst concentration for a constant dichlorvos concentration (1.66 x 10(-4) M) at pH 4. Kinetic data were obtained at pH 4 and pH 9 for dichlorvos and the inorganic species released through its photo-induced degradation. The proposed mechanism which assumes the formation of some toxic intermediates resistant to mineralization is supported by theoretical calculations and the observed inorganic mass balances. CONCLUSIONS: The calculated pseudo-first-order rate constants were dependent on the dissolved oxygen level at low O(2) flow rate, but somewhat independent on the initial pH. The decrease of pH during the irradiation suggests the formation of organic acids. The presence of organic intermediates was confirmed also by TOC measurements. A plausible reaction mechanism of DDVP degradation through the UV-A/TiO(2) process was proposed.

Highly thermostable exopolysaccharide produced by the moderately halophilic bacterium isolated from a man-made young salt lake in Romania.

Halophilic bacterial strains isolated from a man-made salt lake in Romania produce a specific exopolysaccharide. This product is synthesized under both static and stirring conditions, and the yield of this exoploysaccharide depends on the composition of the culture medium. The highest amount of polymer was obtained in the presence of casamino acids and yeast extract, under stirring conditions. This polymer has high thermostability, with a melting point at 207 degrees C. The melting process is associated with the thermal degradation of the compound. This polymer is characterized by maximum absorbtion at 260 nm and fluorescence emission at 530 nm. The FT-IR analysis of the polymer revealed the presence of a saccharide structure and of amine and sulfate groups throughout the sugar backbone.