Life cycle assessment of biowaste and green waste composting systems: A review of applications and implementation challenges.

Composting is one of the most widely applied methods for recycling organic waste. This process has been proposed as one option that facilitates the reincorporation of materials into the production cycle. However, composting also generates environmental impacts. Life Cycle Assessment (LCA) is the most common approach to evaluate the environmental impacts of a process at different system stages. Nevertheless, applying LCA in composting facilities is challenging due to the extensive information required, the lack of standardization on the initial assumptions, the definition of system boundaries, and the high diversity of existing composting technologies. This paper systematically reviews LCA studies in biowaste and/or green waste composting. The study highlights the challenges that should be met in order to improving the application of LCA to evaluate the environmental impacts of this type or waste treatment strategy. The review protocol used identified 456 papers published between 2010 and 2022. After the screening, 56 papers were selected, read, and thoroughly analyzed. The results show that: i) about 68% of the studies aimed to compare composting with other solid waste management options; ii) there was a wide diversity among the impact categories considered, which predominantly included climate change and ozone depletion; iii) there was no consensus on the functional unit or the system boundaries; iv) the main gaseous emissions studied were ammonia, methane, and nitrogen oxide, which were generally determined by emission factors; v) the avoided environmental impacts associated with the end-product quality and its application as an organic amendment or soil improver were ignored. This work demonstrates the complexity of conducting credible and valid composting LCA studies and proposes seven recommendations for improving the application of this assessment methodology to analyze this waste management alternative.

A systematic review on the composting of green waste: Feedstock quality and optimization strategies.

Green waste (GW) is an important fraction of municipal solid waste (MSW). The composting of lignocellulosic GW is challenging due to its low decomposition rate. Recently, an increasing number of studies that include strategies to optimize GW composting appeared in the literature. This literature review focuses on the physicochemical quality of GW and on the effect of strategies used to improve the process and product quality. A systematic search was carried out, using keywords, and 447 papers published between 2002 and 2018 were identified. After a screening process, 41 papers addressing feedstock quality and 32 papers on optimization strategies were selected to be reviewed and analyzed in detail. The GW composition is highly variable due to the diversity of the source materials, the type of vegetation, and climatic conditions. This variability limits a strict categorization of the GW physicochemical characteristics. However, this research established that the predominant features of GW are a C/N ratio higher than 25, a deficit in important nutrients, namely nitrogen (0.5-1.5% db), phosphorous (0.1-0.2% db) and potassium (0.4-0.8% db) and a high content of recalcitrant organic compounds (e.g. lignin). The promising strategies to improve composting of GW were: i) GW particle size reduction (e.g. shredding and separation of GW fractions); ii) addition of energy amendments (e.g. non-refined sugar, phosphate rock, food waste, volatile ashes), bulking materials (e.g. biocarbon, wood chips), or microbial inoculum (e.g. fungal consortia); and iii) variations in operating parameters (aeration, temperature, and two-phase composting). These alternatives have successfully led to the reduction of process length and have managed to transform recalcitrant substances to a high-quality end-product.

A systematic approach to evaluate parameter consistency in the inlet stream of source separated biowaste composting facilities: A case study in Colombia.

Biowaste is commonly the largest fraction of municipal solid waste (MSW) in developing countries. Although composting is an effective method to treat source separated biowaste (SSB), there are certain limitations in terms of operation, partly due to insufficient control to the variability of SSB quality, which affects process kinetics and product quality. This study assesses the variability of the SSB physicochemical quality in a composting facility located in a small town of Colombia, in which SSB collection was performed twice a week. Likewise, the influence of the SSB physicochemical variability on the variability of compost parameters was assessed. Parametric and non-parametric tests (i.e. Student's t-test and the Mann-Whitney test) showed no significant differences in the quality parameters of SSB among collection days, and therefore, it was unnecessary to establish specific operation and maintenance regulations for each collection day. Significant variability was found in eight of the twelve quality parameters analyzed in the inlet stream, with corresponding coefficients of variation (CV) higher than 23%. The CVs for the eight parameters analyzed in the final compost (i.e. pH, moisture, total organic carbon, total nitrogen, C/N ratio, total phosphorus, total potassium and ash) ranged from 9.6% to 49.4%, with significant variations in five of those parameters (CV>20%). The above indicate that variability in the inlet stream can affect the variability of the end-product. Results suggest the need to consider variability of the inlet stream in the performance of composting facilities to achieve a compost of consistent quality.

Stability and maturity of biowaste composts derived by small municipalities: Correlation among physical, chemical and biological indices.

Stability and maturity are important criteria to guarantee the quality of a compost that is applied to agriculture or used as amendment in degraded soils. Although different techniques exist to evaluate stability and maturity, the application of laboratory tests in municipalities in developing countries can be limited due to cost and application complexities. In the composting facilities of such places, some classical low cost on-site tests to monitor the composting process are usually implemented; however, such tests do not necessarily clearly identify conditions of stability and maturity. In this article, we have applied and compared results of stability and maturity tests that can be easily employed on site (i.e. temperature, pH, moisture, electrical conductivity [EC], odor and color), and of tests that require more complex laboratory techniques (volatile solids, C/N ratio, self-heating, respirometric index, germination index [GI]). The evaluation of the above was performed in the field scale using 2 piles of biowaste applied compost. The monitoring period was from day 70 to day 190 of the process. Results showed that the low-cost tests traditionally employed to monitor the composting process on-site, such as temperature, color and moisture, do not provide consistent determinations with the more complex laboratory tests used to assess stability (e.g. respiration index, self-heating, volatile solids). In the case of maturity tests (GI, pH, EC), both the on-site tests (pH, EC) and the laboratory test (GI) provided consistent results. Although, stability was indicated for most of the samples, the maturity tests indicated that products were consistently immature. Thus, a stable product is not necessarily mature. Conclusively, the decision on the quality of the compost in the installations located in developing countries requires the simultaneous use of a combination of tests that are performed both in the laboratory and on-site.

Social history of medicine in Spain: points of departure and directions for research.

The development and extension of activities in the domain of die social history of medicine in Spain since the 1960s is reviewed. Attention is paid, first, to the institutional setting and theoretical background of this broad line of research, taking the perspective of the professionalization of the subject of the 'history of medicine' as an under-graduate discipline in the syllabus of the Faculties of Medicine. Secondly, four main directions for research are outlined, namely disease and society, health policies, health professions and gender and medicine, including critical attention to the principal works, active authors, and working and narrative styles.

The making of Spanish public health administration during the first third of the twentieth century.

An overview of the forming of the modern Health Administration in Spain is intended, trying to relate proposals with day to day realities. Starting with the dissection of elements that suggested the sanitary backwardness of Spain to contemporary observers, this paper traces the actual program to modernization in public health services through the analysis of the political action led by an élite of doctors and public health administrators, who happened to be at the same time relevant political figures of the dynastic parties, the legal framework of reform (the General Decree of Health, 1904) and the institutional changes in the provisions for public health surveillance; these are labelled "from the Health Boards to the Institutes of Hygiene", symbolizing the moving away from a traditional, pluri-composed and political instance, the Health Board, where experts performed just as advisers, to a new, scientific based and professionally managed institution which, under the Second Republic, extended its benefits to the rural population. The lack of practical effects of these public health reforms led us to conclude that they were suggested more to extend professional areas of competence as well as part of conciliatory policies regarding the "social question".