Assessment of three different approaches for integrating phosphorus recovery from sewage sludge and derived products in existing wastewater treatment plants.

Three different technological solutions, namely acidogenic fermentation and chemical extraction (alkaline or acidic), followed by precipitation with 1% Ca(OH)2, were investigated in the view of integrating phosphorus recovery into existing wastewater treatment plants. Experiments were conducted at the lab-scale using (i) sludge taken from biologically and chemically promoted phosphorus removal activated sludge processes and (ii) ashes obtained from sludge muffle incineration. Results highlighted the benefits of enhanced biological phosphorus removal (EBPR) systems rather than chemically promoted phosphorus removal in not only phosphorus extraction (up to 40% with EBPR) and recovery directly from secondary sludge (P precipitation between 66 and 92%), but after sludge incineration as well (P extraction up to 96% and precipitation above 96%). Acidogenic fermentation ensured the highest phosphorus release from EBPR sludge (equal to a concentration in solution of 122 mg/L P-PO43-), while the derived ashes had a lower level of metal contamination (particularly Fe and Al content < 2%). The phosphorus-rich product obtained by means of the recovery process showed relevant metal contamination (Cu, Zn, and Ni) under some operating conditions, suggesting the need for further treatments.

Insights on biological phosphorus removal with partial nitrification in single sludge system via sidestream free ammonia and free nitrous acid dosing.

The sidestream sludge treatment by free ammonium (FA)/free nitrous acid (FNA) dosing was frequently demonstrated to maintain the nitrite pathway for the partial nitrification (PN) process. Nevertheless, the inhibitory effect of FA and FNA would severely influence polyphosphate accumulating organisms (PAOs), destroying the microbe-based phosphorus (P) removal. Therefore, a strategic evaluation was proposed to successfully achieve biological P removal with a partial nitrification process in a single sludge system by sidestream FA and FNA dosing. Through the long-term operation of 500 days, excellent phosphorus, ammonium and total nitrogen removal performance were achieved at 97.5 ± 2.6 %, 99.1 ± 1.0 % and 75.5 ± 0.4 %, respectively. Stable partial nitrification with a nitrite accumulation ratio (NAR) of 94.1 ± 3.4 was attained. The batch tests also reported the robust aerobic phosphorus uptake based on FA and FNA adapted sludge after exposure of FA and FNA, respectively, suggesting the FA and FNA treatment strategy could potentially offer the opportunity for the selection of PAOs, which synchronously have the tolerance to FA and FNA. Microbial community analysis suggested that Accumulibacter, Tetrasphaera, and Comamonadaceae collectively contributed to the phosphorus removal in this system. Summarily, the proposed work presents a novel and feasible strategy to integrate enhanced biological phosphorus removal (EBPR) and short-cut nitrogen cycling and bring the combined mainstream phosphorus removal and partial nitrification process closer to practical application.

The impact of pH on the anaerobic and aerobic metabolism of Tetrasphaera-enriched polyphosphate accumulating organisms.

Members of the genus Tetrasphaera are putative polyphosphate accumulating organisms (PAOs) that have been found in greater abundance than Accumulibacter in many full-scale enhanced biological phosphorus removal (EBPR) wastewater treatment plants worldwide. Nevertheless, previous studies on the effect of environmental conditions, such as pH, on the performance of EBPR have focused mainly on the response of Accumulibacter to pH changes. This study examines the impact of pH on a Tetrasphaera PAO enriched culture, over a pH range from 6.0 to 8.0 under both anaerobic and aerobic conditions, to assess its impact on the stoichiometry and kinetics of Tetrasphaera metabolism. It was discovered that the rates of phosphorus (P) uptake and P release increased with an increase of pH within the tested range, while PHA production, glycogen consumption and substrate uptake rate were less sensitive to pH changes. The results suggest that Tetrasphaera PAOs display kinetic advantages at high pH levels, which is consistent with what has been observed previously for Accumulibacter PAOs. The results of this study show that pH has a substantial impact on the P release and uptake kinetics of PAOs, where the P release rate was >3 times higher and the P uptake rate was >2 times higher at pH 8.0 vs pH 6.0, respectively. Process operational strategies promoting both Tetrasphaera and Accumulibacter activity at high pH do not conflict with each other, but lead to a potentially synergistic impact that can benefit EBPR performance.

Polyhydroxyalkanoates production from ethanol- and lactate-rich fermentate of confectionary industry effluents.

Polyhydroxyalkanoate (PHA) production has been the focus of considerable research to increase productivities and reduce production costs. In this study, a fermented confectionary industry wastewater was used as feedstock for mixed microbial culture PHA production. The feedstock was dominated by lactate and ethanol (60-90 % of all soluble fermentation products). The culture selection reactor was inoculated with municipal activated sludge and was operated at an organic loading rate (OLR) of 100 Cmmol·L-1·d-1, achieving a robust PHA-accumulating enrichment, which produced up to 52.6 ± 0.4 wt% of PHA in accumulation assays. An OLR increase in the culture selection stage to 150 Cmmol·L-1·d-1 led to a PHA content of 59.1 ± 0.6, a yield of 0.93 ± 0.01 Cmol-PHA·Cmol-S-1 and a productivity of 0.93 ± 0.01 g-PHA L-1·h-1. A correlation analysis of the impact of ethanol concentrations from 3.19 to 20.3 Cmmol·L-1 in the reactor showed that ethanol inhibited PHA production rate and yield and the consumption of other carbon sources available. Microbial community analysis revealed the increase of Amaricoccus genus during the bioreactor operation time, a known PHA accumulator. The produced polymer was poly(3-hydroxybutyrate) with an average molecular weight of 4.3 × 105 Da and a polydispersity index of 1.88.

Dynamics of Microbial Communities in Phototrophic Polyhydroxyalkanoate Accumulating Cultures.

Phototrophic mixed cultures (PMC) are versatile systems which can be applied for waste streams, valorisation and production of added-value compounds, such as polyhydroxyalkanoates (PHA). This work evaluates the influence of different operational conditions on the bacterial communities reported in PMC systems with PHA production capabilities. Eleven PMCs, fed either with acetate or fermented wastewater, and selected under either feast and famine (FF) or permanent feast (PF) regimes, were evaluated. Overall, results identified Chromatiaceae members as the main phototrophic PHA producers, along with Rhodopseudomonas, Rhodobacter and Rhizobium. The findings show that Chromatiaceae were favoured under operating conditions with high carbon concentrations, and particularly under the PF regime. In FF systems fed with fermented wastewater, the results indicate that increasing the organic loading rate enriches for Rhodopseudomonas, Rhizobium and Hyphomicrobiaceae, which together with Rhodobacter and Chromatiaceae, were likely responsible for PHA storage. In addition, high-sugar feedstock impairs PHA production under PF conditions (fermentative bacteria dominance), which does not occur under FF. This characterization of the communities responsible for PHA accumulation helps to define improved operational strategies for PHA production with PMC.

Expanding ASM models towards integrated processes for short-cut nitrogen removal and bioplastic recovery.

In next-generation water resource recovery facilities (WRRFs), it is becoming increasingly important to save energy costs and promote resource recovery of valuable products. One way of reducing the substantial aeration energy costs at WRRFs is to employ shortcut N removal, while polyhydroxyalkanoate (PHA) production and recovery as bioplastic is a promising means of recovering a valuable product from biosolids. Both objectives can be achieved simultaneously through the Short-Cut Enhanced Phosphorus and PHA Recovery (SCEPPHAR) process. However, current mathematical models have not previously been employed to describe the behavior of such a process, which limits engineering design and optimisation of process operation. This work focusses on extending the ASM3 model towards the description of short-cut nitrogen removal and simultaneous PHA recovery in a sidestream treatment process. The calibrated and validated model described very well the nitritation process coupled with the aerobic feast/anoxic famine process for the selection of PHA producing organisms at a pilot-scale facility operated in Carbonera, Italy, where the normalised root mean squared error (NRMSE) was consistently <20%. Furthermore, the model applied to the PHA selection stage could effectively describe the PHA accumulation stage without recalibration. A simulation study was performed using the modified ASM3 model to assess the relative benefits of the SCEPPHAR process strategy as compared to the fully aerobic selection process for mixed culture PHA production. While the level of PHA production was found to be 34% lower with SCEPPHAR, a 43% savings in volatile fatty acids (VFAs) demand, a 15% decrease in Total suspended solids (TSS) production and a 28% decrease in oxygen demand were also achievable, which could lead to savings in operational costs. This study facilitates the design and optimisation of WRRFs that integrate short-cut N removal with PHA production, saving aeration energy costs while achieving resource recovery.

Diclofenac biotransformation in the enhanced biological phosphorus removal process.

Diclofenac is a pharmaceutical active compound frequently detected in wastewater and water bodies, and often reported to be persistent and difficult to biodegrade. While many previous studies have focussed on assessing diclofenac biodegradation in nitrification and denitrification processes, this study focusses on diclofenac biodegradation in the enhanced biological phosphorus removal (EBPR) process, where the efficiency of this process for diclofenac biodegradation as well as the metabolites generated are not well understood. An enrichment of Accumulibacter polyphosphate accumulating organisms (PAOs) was operated in an SBR for over 300 d, and acclimatized to 20 µg/L of diclofenac, which is in a similar range to that observed in domestic wastewater influents. The diclofenac biotransformation was monitored in four periods of stable operation and linked to the microbial community and metabolic behaviour in each period. Nitrification was observed in two of the four periods despite the addition of a nitrification inhibitor, and these periods were positively correlated with increased diclofenac biodegradation. Interestingly, in two periods with excellent phosphorus removal (>99%) and no nitrification, different levels of diclofenac biotransformation were observed. Period 2, enriched in Accumulibacter Type II achieved more significant diclofenac biotransformation (3.4 µg/gX), while period 4, enriched in Accumulibacter Type I achieved lower diclofenac biotransformation (0.4 µg/gX). In total, 23 transformation products were identified, with lower toxicity than the parent compound, enabling the elucidation of multiple metabolic pathways for diclofenac biotransformation. This study showed that PAOs can contribute to diclofenac biotransformation, yielding less toxic transformation products, and can complement the biodegradation carried out by other organisms in activated sludge, particularly nitrifiers.

The impact of biomass withdrawal strategy on the biomass selection and polyhydroxyalkanoates accumulation of mixed microbial cultures.

The production of polyhydroxyalkanoates (PHA) by mixed microbial cultures (MMC) has been studied as an alternative to pure cultures in order to reduce the price of PHA through use of open systems and low-cost substrates, such as agro-industrial sub-products. However, the widespread applicability of this process depends on the optimization of operational factors impacting PHA productivity. This study addresses the impact of biomass withdrawal strategy on the performance of MMC selection reactors and consequently on biomass productivity and global PHA productivity. Two selection reactors were operated in parallel under similar conditions, except for the timing of biomass withdrawal, at the end of the famine phase (Reactor 1, R1) versus at the end of the feast phase (Reactor 2, R2) at an organic loading rate of 100 Cmmol.L-1.d-1 and solids retention time of 4 days. The biomass selected in both conditions had similar PHA storing capacity as shown by the similar yields of PHA per substrate obtained in the accumulation assays; however, R1 reached a higher biomass productivity (about 4-fold higher than R2). This study demonstrated that removing the excess biomass at the end of the famine phase resulted in a much higher global PHA productivity and that the key parameter affecting the global PHA productivity of the 2-stage system was the volumetric biomass productivity. Results obtained provide important insight into how MMC systems can be best operated to maximize PHA productivity.

The impact of a seasonal change in loading rate on the nitrous oxide emissions at the WWTP of a tourist region.

Nitrous oxide (N2O) is a powerful greenhouse gas (GHG) whose production and emission must be minimised from wastewater treatment plants (WWTPs) to avoid undesirable impacts to climate change and the ozone layer. WWTPs operated in tourist regions undergo large seasonal changes to the influent loading rates of organic matter, nitrogen and phosphorus, which operators must respond to by changing their operational conditions. This study examines the impact of a change in low to high season on the N2O emissions of an activated sludge WWTP in a well-known tourist region in the Algarve, Portugal. While literature studies have suggested that increases in the nitrogen and organic loading rates can promote increased N2O emissions, we have found higher N2O emissions in the low season (7.4% kgN2O-N·kgNH4-N-1), where these loading rates were lower. It was found that the impact of accompanying operational changes to the WWTP outweighed any change caused by the increased loading rate, where the aeration rate showed a significant correlation with N2O emission dynamics. The location of the N2O fluxes observed as well as the dissolved vs gaseous N2O levels suggested that the hydroxylamine oxidation pathway was likely to be of higher relevance towards N2O production as compared to nitrifier denitrification. This study contributes towards the understanding of operational factors impacting N2O emissions at full-scale WWTPs and potential mitigation strategies.

Intracellular polyphosphate length characterization in polyphosphate accumulating microorganisms (PAOs): Implications in PAO phenotypic diversity and enhanced biological phosphorus removal performance.

Polyphosphate (polyP) accumulating organisms (PAOs) are the key agent to perform enhanced biological phosphorus removal (EBPR) activity, and intracellular polyP plays a key role in this process. Potential associations between EBPR performance and the polyP structure have been suggested, but are yet to be extensively investigated, mainly due to the lack of established methods for polyP characterization in the EBPR system. In this study, we explored and demonstrated that single-cell Raman spectroscopy (SCRS) can be employed for characterizing intracellular polyPs of PAOs in complex environmental samples such as EBPR systems. The results, for the first time, revealed distinct distribution patterns of polyP length (as Raman peak position) in PAOs in lab-scale EBPR reactors that were dominated with different PAO types, as well as among different full-scale EBPR systems with varying configurations. Furthermore, SCRS revealed distinctive polyP composition/features among PAO phenotypic sub-groups, which are likely associated with phylogenetic and/or phenotypic diversity in EBPR communities, highlighting the possible resolving power of SCRS at the microdiversity level. To validate the observed polyP length variations via SCRS, we also performed and compared bulk polyP length characteristics in EBPR biomass using conventional polyacrylamide gel electrophoresis (PAGE) and solution 31P nuclear magnetic resonance (31P-NMR) methods. The results are consistent with the SCRS findings and confirmed the variations in the polyP lengths among different EBPR systems. Compared to conventional methods, SCRS exhibited advantages as compared to conventional methods, including the ability to characterize in situ the intracellular polyPs at subcellular resolution in a label-free and non-destructive way, and the capability to capture subtle and detailed biochemical fingerprints of cells for phenotypic classification. SCRS also has recognized limitations in comparison with 31P-NMR and PAGE, such as the inability to quantitatively detect the average polyP chain length and its distribution. The results provided initial evidence for the potential of SCRS-enabled polyP characterization as an alternative and complementary microbial community phenotyping method to facilitate the phenotype-function (performance) relationship deduction in EBPR systems.

The storage compounds associated with Tetrasphaera PAO metabolism and the relationship between diversity and P removal.

In enhanced biological phosphorus removal (EBPR), Tetrasphaera can potentially be an abundant and important polyphosphate accumulating organism (PAO), however ongoing questions remain concerning its storage compounds, phosphorus (P) removal capabilities and metabolic behaviour. This study investigated each of these points in an enriched Tetrasphaera culture (95% biovolume). The enriched Tetrasphaera culture fermented amino acids, while also converting and storing diverse amino acids as aspartic and glutamic acid within cells. Subsequent intracellular consumption of these two amino acids during the aerobic phase supports their importance in the metabolism of Tetrasphaera. Polyhydroxyalkanoate (PHA) cycling was also observed in this study, in contrast to some previous studies on Tetrasphaera. While exhibiting anaerobic phosphorus release and aerobic uptake, the highly enriched Tetrasphaera culture was unable to completely remove phosphorus in sequencing batch reactors (SBR) cycles, with an average removal efficiency of 72.3 ± 7.8%. This is unlike a previous study containing both Tetrasphaera (70%) and Accumulibacter (22%), which regularly performed complete phosphorus removal under otherwise similar operational conditions, at efficiencies of > 99%. Notably, the phylodiversity of organisms belonging to Tetrasphaera was substantially different in the present work, consisting mainly of organisms within Clade 2, likely impacting PHA cycling. These results suggest that the contribution of Tetrasphaera towards P removal is highly dependent on the composition of its Clades within this microbial group and an observed higher abundance of Tetrasphaera in WWTPs does not necessarily imply overall higher P removal. This study improves our understanding of the role of Tetrasphaera within EBPR systems and key factors impacting its metabolism.

Achieving combined biological short-cut nitrogen and phosphorus removal in a one sludge system with side-stream sludge treatment.

Biological nitrogen (N) removal via the short-cut pathway (NH4+-N→NO2--N→N2) is economically attractive in wastewater treatment plants (WWTPs). However, biological phosphorus (P) removal processes remain a bottleneck in these systems due to the strong inhibitory effect of nitrite or its protonated form (HNO2, free nitrous acid - FNA) on polyphosphate accumulating organisms (PAOs). In this study, a novel combined nitrogen and phosphorus removal strategy was verified and achieved in a biological short-cut nitrogen removal system via side-stream sludge treatment with FNA, and the mechanisms impacting this process were investigated. The side-stream FNA treatment process applied here led to a significant reduction in the real sludge retention time (SRT) in the mainstream (approximately 2.7 days) based on the biocidal effect of FNA to the majority of the organisms. This work also found that around 40% of the P uptake activity was still maintained at a much higher FNA level of 38 µg N/L with potential PAOs, which highly broadened the current knowledge of PAOs community. An economic analysis revealed advantages of the proposed as compared to conventional biological nitrogen and phosphorus removal (13% savings in total cost), biological short-cut nitrogen removal (via FNA treatment) with chemical phosphorus precipitation (21% savings) and conventional biological nitrogen removal with chemical precipitation (27% savings). Overall, this study presents a novel and viable retrofit strategy in integrating biological short-cut nitrogen removal with EBPR for next generation WWTPs.

Accumulibacter diversity at the sub-clade level impacts enhanced biological phosphorus removal performance.

Accumulibacter is a well-known group of organisms, typically considered to be polyphosphate accumulating organisms (PAOs), but potentially capable of glycogen accumulating organism (GAO) metabolism under limiting influent phosphate levels. Metabolic features of Accumulibacter are typically linked to its phylogenetic identity at the Type or clade level, though it is unclear the extent to which Accumulibacter diversity can correlate with its capacity to perform P removal. This paper investigates the fine-scale diversity of Accumulibacter and its link with enhanced biological phosphorus removal (EBPR) performance under various operating conditions, to understand the conditions and community structure leading to successful and unsuccessful EBPR operation. For this purpose, the organic carbon feeding rate and total organic carbon concentration were varied during three distinct operational periods, where influent phosphate was never limiting. Accumulibacter was always the dominant microbial group (>80% of all bacteria according to quantitative fluorescence in situ hybridisation - FISH) and low levels of Competibacter and other GAOs were consistently observed (<15% of all bacteria). Steady state was achieved in each of the three periods, with average phosphorus removal levels of 36%, 99% and >99%, respectively. Experimentally determined stoichiometric activity supported the expression of a mixed PAO/GAO metabolism in the first steady state period and the typical PAO metabolism in the other two steady state periods. FISH quantification and amplicon sequencing of the polyphosphate kinase (ppk1) functional gene indicated that Accumulibacter clade IIC was selected in the first steady state period, which shifted to clade IA after decreasing the carbon feeding rate in steady state period 2, and finally shifted back to clade IIC in the third steady state period. Fine-resolution Ppk-based phylogenetic analysis revealed three different clusters within Accumulibacter clade IIC, where clusters IICii and IICiii were linked to poor EBPR performance in period 1, and cluster IICi was linked to good EBPR performance in period 3. This study shows that the deterioration of EBPR processes through GAO activity at non-limiting P concentrations can be linked to organisms that are typically classified as PAOs, not only to known GAOs such as Competibacter. Intra-clade phylogenetic diversity within Accumulibacter showed that some clusters actually behave similarly to GAOs even without influent phosphate limitation. This study highlights the need to closely re-examine traditional interpretations regarding the link between the microbial community composition and identity with the performance and metabolism of EBPR systems.

Butyrate can support PAOs but not GAOs in tropical climates.

Glycogen accumulating organisms (GAOs) are thought to compete with polyphosphate accumulating organisms (PAOs) for the often-limiting carbon sources available in wastewater, deteriorating enhanced biological phosphorus removal (EBPR) performance at high temperatures. Fermentation liquids are often used to provide an additional carbon source supply in EBPR processes, where butyrate is known to be an important volatile fatty acid (VFA) produced in sludge fermentation. Nevertheless, the impact of butyrate on the PAO-GAO competition is not well understood especially at high temperature. The results of this study demonstrate that butyrate, as a supplemental or sole carbon source, could be promising for EBPR in tropical climates. When the carbon source was gradually changed from acetate to butyrate, a substantial PAO population was found under both conditions, despite a substantial shift in the abundance of Candidatus Accumulibacter phosphatis (decreased from 37.4% to 13.9%) to Rhodocyclaceae (increased from 2.0% to 14.5%), where both organisms likely played an important role in P-removal. Thus, a relatively stable P removal performance was realized throughout the whole operation period. Nevertheless, butyrate had a negative impact on GAOs. The biomass concentration and microbial diversity continually decreased in the GAO reactor, and Candidatus Competibacter phosphatis reduced from 27.3% to 6.2%, where the dominant population was replaced by Zoogloea. With the addition of butyrate as carbon source, the total amount of synthesized PHAs reduced in both PAO and GAO cultures and the composition of PHA was greatly changed. The presence of a novel PHA fraction (PHH) may disturb the microbial activity in the aerobic phase, where the GAO culture was more severely affected. Glycogen cycling also seemed to be limited in both reactors. This could reduce the GAO metabolism in both cultures and favor PAOs and P removal. Furthermore, the biomass growth rate of the PAO culture was higher than that of GAO when fed with butyrate, which also provides PAO a competitive advantage. All the above results indicate that butyrate could not be well metabolized by GAOs, but could provide PAOs a competitive advantage. Thus, mixed VFAs (i.e. acetate, propionate and butyrate) are likely to favor PAOs over GAOs in EBPR processes operated in warm climates, where the impact of substantial butyrate fractions represents an advantage towards successful process operation.

A review of the biotransformations of priority pharmaceuticals in biological wastewater treatment processes.

Wastewater effluent discharges have been considered as one of the main sources of synthetic chemicals entering into the aquatic environment. Even though they occur at low concentrations, pharmaceutically active compounds (PhACs) can have an impact on ecological toxicity that affects aquatic organisms. Moreover, new regulations in development toward preserving water quality reinforces the increasing need to monitor and abate some PhACs in wastewater treatment plants (WWTPs), where they are typically only partially eliminated. Unlike most previous reviews, we have focussed on how the main biological and chemical molecular factors impact the biotransformations of key PhACs in biological WWTP processes. Biotransformations have been found to be an important contributor towards the removal of PhACs from WWTP effluents. This review paper critically assesses these aspects and the recent advances that have been achieved in wastewater treatment processes for biodegradation of 7 PhACs; namely the non-steroidal anti-inflammatory drug (NSAID) diclofenac (DCF); the macrolide antibiotics azithromycin (AZM), erythromycin (ERY) and clarithromycin (CLR); the two natural estrogens estrone (E1) and 17ß-estradiol (E2), and the synthetic estrogen 17α-ethinylesradiol (EE2). These represent the micropollutants of the EU Watch list in Decision 2015/495/EU that are most relevant to WWTPs due to their frequent detection. The metabolic pathways, transformation products and impact of relevant factors to biological WWTP processes is addressed in this review. The biokinetics of PhAC biodegradation in different engineered bioprocesses is also discussed. Promising technologies and operational strategies that are likely to have a high impact on controlling PhAC releases are highlighted and future research needs are also proposed.

Long-term simulation of a full-scale EBPR plant with a novel metabolic-ASM model and its use as a diagnostic tool.

This study evaluates the predictive capacity of the META-ASM model, a new integrated metabolic activated sludge model, in describing the long-term performance of a full-scale enhanced biological phosphorus removal (EBPR) system that suffers from inconsistent performance. In order to elucidate the causes of EBPR upsets and troubleshoot the process accordingly, the META-ASM model was tested as an operational diagnostic tool in a 1336-day long-term dynamic simulation, while its performance was compared with the ASM-inCTRL model, a version based on the Barker & Dold model. Overall, the predictions obtained with the META-ASM without changing default parameters were more reliable and effective at describing the active biomass of polyphosphate accumulating organisms (PAOs) and the dynamics of their storage polymers. The primary causes of the EBPR upsets were the high aerobic hydraulic retention times (HRTs) and low organic loading rates (OLRs) of the plant, which led to periods of starvation. The impact of these factors on EBPR performance were only identified with the META-ASM model. Furthermore, the first signs of process upsets were predicted by variations in the aerobic PAO maintenance rates, suggesting that the META-ASM model has potential to provide an early warning of process upset. The simulation of a new viable operational strategy indicated that troubleshooting the process could be achieved by reducing the aerated volume by switching off air in the first half of the aeration tank. In this new strategy, the META-ASM model predicted a simultaneous improvement in the biological phosphorus (P) and nitrogen (N) removal due to the enhancement of the hydrolysis and fermentation of the mixed liquor sludge in the new unaerated zone, which increased the availability of volatile fatty acids (VFAs) for PAOs. This study demonstrates that the META-ASM model is a powerful operational diagnostic tool for EBPR systems, capable of predicting and mitigating upsets, optimising performance and evaluating new process designs.

Modified Poly(acrylic acid)-Based Hydrogels for Enhanced Mainstream Removal of Ammonium from Domestic Wastewater.

Rapid and continuous ammonium adsorption from mainstream coupled with side-stream ammonium recovery and adsorbent regeneration could enable ammonium recovery from domestic wastewater. This study describes the use of tailored poly(acrylic acid)-based (NaPAA) hydrogels as effective sorbents for ammonium removal from domestic wastewater. Modified NaPAA hydrogels having 60% ionization and 4.8 mol % N',N'-methylenebisacrylamide as the cross-linker reduced the overall swelling by 92% from 407 to 31 g/g because of higher cross-linking density. At hydrogel loadings of 2.5-7.5 g/L, the NaPAA hydrogels achieved ammonium concentrations of 8.3 ± 0.6 to 10.1 ± 0.1 mg/L NH4-N, which corresponds to removal efficiencies of 53-77% after 10 min of contact time in real domestic wastewater. At the same hydrogel loadings, the ammonium removal efficiency of NaPAA hydrogels in synthetic wastewater was found to be comparable to that in real sewage (71% vs 69%, respectively), suggesting that the sorption performance is only marginally affected by organic constituents found in domestic wastewater. In addition, the NaPAA hydrogels removed 25-51% ammonium in 10 min from synthetic streams having 200-400% higher ionic strengths than those commonly observed in sewage. Furthermore, simulation studies showed that a discharge concentration of ∼1.9 mg/L NH4-N, well below the commonly applied discharge limits in most regions, can be achieved using mainstream ammonium removal by NaPAA hydrogels followed by biological assimilation from the growth of ordinary heterotrophic organisms.

The impact of temperature on the metabolism of volatile fatty acids by polyphosphate accumulating organisms (PAOs).

This study investigated the effects of different carbon sources on enriched Accumulibacter PAO cultures at high temperature (30 °C) and compared the carbon transformation with low temperature (20 °C) cases reported in literature, revealing several key metabolic differences. While PAOs seemed to prefer propionate anaerobically as compared to other VFAs at high temperature, high aerobic glycogen replenishment was realized with propionate as the anaerobic carbon source, a trait not previously observed at low temperatures. Therefore, it was found that propionate is not correlated with high P removal by Accumulibacter PAO at high temperatures. A combined substrate of acetate, propionate and perhaps butyrate seemed to be a better carbon source combination, since the total VFA uptake rate increased by up to 46%, and this increased the aerobic P-removal efficiency by up to 38.4% and reduced the glycogen recovery by more than 63% compared to the use of only propionate as substrate. This study improves our understanding of how to stimulate successful EBPR operation in warm climates by augmenting the P removal performance of PAOs.

Community profile governs substrate competition in polyhydroxyalkanoate (PHA)-producing mixed cultures.

Polyhydroxyalkanoates (PHAs) are biobased, biodegradable polymers that can be produced efficiently by mixed microbial cultures (MMCs) at low cost. Substrate preferences have been found to vary depending on the microbial composition in the MMCs. In this study, the competition between the uptake of different substrates has been related for the first time to the abundance of certain microbial communities. With a higher abundance of Plasticicumulans enriched in the culture, the inhibitory effect of butyrate and valerate on the uptake of acetate and propionate increased and the hydroxybutyrate:hydroxyvalerate (HB:HV) ratio in the final PHA polymer approached the theoretical value calculated from the volatile fatty acid (VFA) composition. This finding can help understanding of the metabolism of PHA accumulating microorganisms and thus predict better the VFA consumption and PHA composition.

Purple phototrophic bacteria for resource recovery: Challenges and opportunities.

Sustainable development is driving a rapid focus shift in the wastewater and organic waste treatment sectors, from a "removal and disposal" approach towards the recovery and reuse of water, energy and materials (e.g. carbon or nutrients). Purple phototrophic bacteria (PPB) are receiving increasing attention due to their capability of growing photoheterotrophically under anaerobic conditions. Using light as energy source, PPB can simultaneously assimilate carbon and nutrients at high efficiencies (with biomass yields close to unity (1 g CODbiomass·g CODremoved-1)), facilitating the maximum recovery of these resources as different value-added products. The effective use of infrared light enables selective PPB enrichment in non-sterile conditions, without competition with other phototrophs such as microalgae if ultraviolet-visible wavelengths are filtered. This review reunites results systematically gathered from over 177 scientific articles, aiming at producing generalized conclusions. The most critical aspects of PPB-based production and valorisation processes are addressed, including: (i) the identification of the main challenges and potentials of different growth strategies, (ii) a critical analysis of the production of value-added compounds, (iii) a comparison of the different value-added products, (iv) insights into the general challenges and opportunities and (v) recommendations for future research and development towards practical implementation. To date, most of the work has not been executed under real-life conditions, relevant for full-scale application. With the savings in wastewater discharge due to removal of organics, nitrogen and phosphorus as an important economic driver, priorities must go to using PPB-enriched cultures and real waste matrices. The costs associated with artificial illumination, followed by centrifugal harvesting/dewatering and drying, are estimated to be 1.9, 0.3-2.2 and 0.1-0.3 $·kgdry biomass-1. At present, these costs are likely to exceed revenues. Future research efforts must be carried out outdoors, using sunlight as energy source. The growth of bulk biomass on relatively clean wastewater streams (e.g. from food processing) and its utilization as a protein-rich feed (e.g. to replace fishmeal, 1.5-2.0 $·kg-1) appears as a promising valorisation route.