A pilot study: effect of somatosensory loss on motor corrections in response to unknown loads in a reaching task by chronic stroke survivors.

Despite recent studies indicating a significant correlation between somatosensory deficits and rehabilitation outcomes, how prevailing somatosensory deficits affect stroke survivors' ability to correct their movements and recover overall remains unclear. To explore how major deficits in somatosensory systems impede stroke survivors' motor correction to various external loads, we conducted a study with 13 chronic stroke survivors who had hemiparesis. An inertial, elastic, or viscous load, which was designed to impose perturbing forces with various force profiles, was introduced unexpectedly during the reaching task using a programmable haptic robot. Participants' proprioception and cutaneous sensation were also assessed using passive movement detection, finger-to-nose, mirror, repositioning, and Weinstein pressure tests. These measures were then analyzed to determine whether the somatosensory measures significantly correlated with the estimated reaching performance parameters, such as initial directional error, positional deviation, velocity deviations, and speed of motor correction were measured. Of 13 participants, 5 had impaired proprioception, as they could not recognize the passive movement of their elbow joint, and they kept showing larger initial directional errors even after the familiarization block. Such continuously found inaccurate initial movement direction might be correlated with the inability to develop the spatial body map especially for calculating the initial joint torques when starting the reaching movement. Regardless of whether proprioception was impaired or not, all participants could show the stabilized, constant reaching movement trajectories. This highlights the role of proprioception especially in the execution of a planned movement at the early stage of reaching movement.

The speed of adaptation is dependent on the load type during target reaching by intact human subjects.

When lifting or moving a novel object, humans are routinely able to quickly characterize the nature of the unknown load and swiftly achieve the desired movement trajectory. It appears that both tactile and proprioceptive feedback systems help humans develop an accurate prediction of load properties and determine how associated limb segments behave during voluntary movements. While various types of limb movement information, such as position, velocity, acceleration, and manipulating forces, can be detected using human tactile and proprioceptive systems, we know little about how the central nervous system decodes these various types of movement data, and in which order or priority they are used when developing predictions of joint motion during novel object manipulation. In this study, we tested whether the ability to predict motion is different between position- (elastic), velocity- (viscous), and acceleration-dependent (inertial) loads imposed using a multiaxial haptic robot. Using this protocol, we can learn if the prediction of the motion model is optimized for one or more of these types of mechanical load. We examined ten neurologically intact subjects. Our key findings indicated that inertial and viscous loads showed the fastest adaptation speed, whereas elastic loads showed the slowest adaptation speed. Different speeds of adaptation were observed across different magnitudes of the load, suggesting that human capabilities for predicting joint motion and manipulating loads may vary systematically with different load types and load magnitudes. Our results imply that human capabilities for load manipulation seems to be most sensitive to and potentially optimized for inertial loads.

Improved cortical activity and reduced gait asymmetry during poststroke self-paced walking rehabilitation.

BACKGROUND: For patients with gait impairment due to neurological disorders, body weight-supported treadmill training (BWSTT) has been widely used for gait rehabilitation. On a conventional (passive) treadmill that runs at a constant speed, however, the level of patient engagement and cortical activity decreased compared with gait training on the ground. To increase the level of cognitive engagement and brain activity during gait rehabilitation, a self-paced (active) treadmill is introduced to allow patients to actively control walking speed, as with overground walking. METHODS: To validate the effects of self-paced treadmill walking on cortical activities, this paper presents a clinical test with stroke survivors. We hypothesized that cortical activities on the affected side of the brain would also increase during active walking because patients have to match the target walking speed with the affected lower limbs. Thus, asymmetric gait patterns such as limping or hobbling might also decrease during active walking. RESULTS: Although the clinical test was conducted in a short period, the patients showed higher cognitive engagement, improved brain activities assessed by electroencephalography (EEG), and decreased gait asymmetry with the self-paced treadmill. As expected, increases in the spectral power of the low γ and ß bands in the prefrontal cortex (PFC), premotor cortex (PMC), and supramarginal gyrus (SG) were found, which are possibly related to processing sensory data and planning voluntary movements. In addition, these changes in cortical activities were also found with the affected lower limbs during the swing phase. Since our treadmill controller tracked the swing speed of the leg to control walking speed, such results imply that subjects made substantial effort to control their affected legs in the swing phase to match the target walking speed. CONCLUSIONS: The patients also showed reduced gait asymmetry patterns. Based on the results, the self-paced gait training system has the potential to train the symmetric gait and to promote the related cortical activities after stroke. Trial registration Not applicable.

Development of a Planar Haptic Robot With Minimized Impedance.

Several studies have reported that stroke survivors displayed improved voluntary planar movements when forces supporting the upper limb increased, and when impeding forces decreased. Earlier haptic devices interacting with the human upper limb were potentially impacted by undesired residual friction force and device inertia. To explore natural, undisturbed voluntary motor control in stroke survivors, we describe the development of a Decoupled-Operational space Robot for wide Impedance Switching (DORIS) with minimized mechanical impedances. This design is based on a novel decoupling mechanism separating the end effector from a manipulator. While the user manipulates the end effector freely inside the workspace of the decoupling mechanism, to which a manipulator of the robot is attached, the robot detects such change in position using a lightweight linkage system. The manipulator of the robot then follows such movements of the end effector swiftly. Consequently, the user can explore the extended workspace, which can be as large as the manipulator's workspace. Since the end effector is mechanically decoupled from the manipulators and actuators, the user can remain unaffected by the mechanical impedances of the manipulator. Mechanical impedances perceived by the user and bandwidth of the control system were estimated. The developed robot was capable of detecting larger maximum acceleration and larger jerk of the reaching movement in chronic stroke survivors with hemiparesis. We propose that this device can be utilized for evaluating voluntary motor control of the upper limb while minimizing the impact of robot inertia and friction forces on limb behavior.

Biomechanical Evaluation of Virtual Reality-based Turning on a Self-Paced Linear Treadmill.

Background: Patients with brain injuries such as Parkinson's disease or stroke exhibit abnormal gait characteristics especially during gait transitions such as step initiation and turning. Since such transitions could precipitate falls and resultant injuries, evaluation and rehabilitation of non-steady state gait in those patients are important. Whereas body weight supported treadmill training (BWSTT) provides a safe and controlled environment for gait training, it is unable to adequately train for gait transitions since the typical linear treadmill does not allow for changes in walking direction and natural fluctuations in speed. Research question: This paper verifies if the suggested virtual reality (VR) based walking interface combined with the unidirectional treadmill can stimulate the user to initiate turning gait. Methods: To validate whether initiation of turning was successfully achieved with the proposed walking system, we developed the VR-based walking interface combined with the self-paced treadmill and compared kinematics, kinetics, and muscle activation levels during the VR-based turning and over ground (OG) turning as well as between straight walking and turning within conditions. Results: Despite walking on a linear treadmill, subjects showed significant increases in head rotation, pelvic rotation, right hip abduction, left hip adduction, foot progression, medial-lateral ground reaction forces, right medial hamstring activation level, and changes in step width during the VR turn compared to straight walking. Significance: The developed VR-based turning interface can provide a safe and controlled environment for assessment of turning in healthy controls and may have a potential for assessment and training in patients with neurological disorders.

The bending stiffness of shoes is beneficial to running energetics if it does not disturb the natural MTP joint flexion.

A local minimum for running energetics has been reported for a specific bending stiffness, implying that shoe stiffness assists in running propulsion. However, the determinant of the metabolic optimum remains unknown. Highly stiff shoes significantly increase the moment arm of the ground reaction force (GRF) and reduce the leverage effect of joint torque at ground push-off. Inspired by previous findings, we hypothesized that the restriction of the natural metatarsophalangeal (MTP) flexion caused by stiffened shoes and the corresponding joint torque changes may reduce the benefit of shoe bending stiffness to running energetics. We proposed the critical stiffness, kcr, which is defined as the ratio of the MTP joint (MTPJ) torque to the maximal MTPJ flexion angle, as a possible threshold of the elastic benefit of shoe stiffness. 19 subjects participated in a running test while wearing insoles with five different bending stiffness levels. Joint angles, GRFs, and metabolic costs were measured and analyzed as functions of the shoe stiffness. No significant changes were found in the take-off velocity of the center of mass (CoM), but the horizontal ground push-offs were significantly reduced at different shoe stiffness levels, indicating that complementary changes in the lower-limb joint torques were introduced to maintain steady running. Slight increases in the ankle, knee, and hip joint angular impulses were observed at stiffness levels exceeding the critical stiffness, whereas the angular impulse at the MTPJ was significantly reduced. These results indicate that the shoe bending stiffness is beneficial to running energetics if it does not disturb the natural MTPJ flexion.

Gait strategy changes with acceleration to accommodate the biomechanical constraint on push-off propulsion.

To maintain steady and level walking, push-off propulsion during the double support phase compensates for the energy loss through heel strike collisions in an energetically optimal manner. However, a large portion of daily gait activities also contains transient gait responses, such as acceleration or deceleration, during which the observed dominance of the push-off work or the energy optimality may not hold. In this study, we examined whether the push-off propulsion during the double support phase served as a major energy source for gait acceleration, and we also studied the energetic optimality of accelerated gait using a simple bipedal walking model. Seven healthy young subjects participated in the over-ground walking experiments. The subjects walked at four different constant gait speeds ranging from a self-selected speed to a maximum gait speed, and then they accelerated their gait from zero to the maximum gait speed using a self-selected acceleration ratio. We measured the ground reaction force (GRF) of three consecutive steps and the corresponding leg configuration using force platforms and an optical marker system, respectively, and we compared the mechanical work performed by the GRF during each single and double support phase. In contrast to the model prediction of an increase in the push-off propulsion that is proportional to the acceleration and minimizes the mechanical energy cost, the push-off propulsion was slightly increased, and a significant increase in the mechanical work during the single support phase was observed. The results suggest that gait acceleration occurs while accommodating a feasible push-off propulsion constraint.