Novel method of producing nanoparticles for gadolinium-scintillator-based digital radiography.

Radiation image sensor properties affect the dose of radiation that patients are exposed to in a clinical setting. Numerous radiation imaging systems use scintillators as materials that absorb radiation. Rare-earth scintillators produced from elements such as gadolinium, yttrium, lutetium, and lanthanum have been investigated to improve the properties of radiation imaging systems. Although such rare-earth scintillators are manufactured with a bulk structure, they exhibit low resolution and low efficiency when they are used as conversion devices. Nanoscintillators have been proposed and researched as a possible solution to these problems. According to the research, the optical properties and size of fine scintillators are affected by the sintering temperature used to produce nanoscintillators instead of the existing bulk-structured scintillators. Therefore, the main purpose of this research is to develop radiation-imaging sensors based on nanoscintillators in order to evaluate the quantitative properties of various scintillators produced under various conditions such as sintering temperature. This is accomplished by measuring acquired phantom images, and modulation transfer functions (MTFs) for complementary-symmetry metal-oxide-semiconductor (CMOS) image sensors under the same X-ray conditions. Low-temperature solution combustion was used to produce fine scintillators consisting of 5 wt% of europium as an activator dopant in a Gd2O3 scintillator host. Variations in the characteristics of the fine scintillators were investigated. The characteristics of fine scintillators produced at various sintering temperatures (i.e., 600, 800, or 1000 degrees C) and with a europium concentration of 0.5 wt% were also analyzed to determine the optimal conditions for synthesizing the fine scintillators.

Three-dimensional evaluation of the relationship between nasopharyngeal airway shape and adenoid size in children.

OBJECTIVE: To evaluate the shapes and sizes of nasopharyngeal airways by using cone-beam computed tomography and to assess the relationship between nasopharyngeal airway shape and adenoid hypertrophy in children. METHODS: Linear and cross-sectional measurements on frontal and sagittal cross-sections containing the most enlarged adenoids and nasopharyngeal airway volumes were obtained from cone-beam computed tomography scans of 64 healthy children (11.0 ± 1.8 years), and the interrelationships of these measurements were evaluated. RESULTS: On the basis of frontal section images, the subjects' nasopharyngeal airways were divided into the following 2 types: the broad and long type and the narrow and flat type. The nasopharyngeal airway sizes and volumes were smaller in subjects with narrow and flat airways than in those with broad and long airways (p < 0.01). Children who showed high adenoid-nasopharyngeal ratios on sagittal imaging, indicating moderate to severe adenoid hypertrophy, had the narrow and flat type nasopharyngeal airway (p < 0.01). CONCLUSIONS: Cone-beam computed tomography is a clinically simple, reliable, and noninvasive tool that can simultaneously visualize the entire structure and a cross section of the nasopharyngeal airway and help in measurement of adenoid size as well as airway volume in children with adenoid hypertrophy.

Optimization of nano-phosphor synthesis by including sensitizer doping for medical X-ray imaging.

Medical radiation imaging systems employ phosphors such as CaWO4 as X-ray receptor materials. Unfortunately, the conversion efficiencies of these materials are rather low (approx. 5%). Alternatives that comprise a bulk structure have been fabricated from rare earth metals, but they are not efficient enough to produce high quality images. Nano-phosphors do not suffer from the limitations inherent to the bulk structures of conventional phosphors. We examined the effects of sensitizer doping conditions on the optical characteristics and morphology of the rare earth phosphor Gd2O3:Eu to fabricate a novel type of nano-phosphor. We optimized a temperature solution-combustion procedure for producing phosphors doped with 5 wt% Eu. Scanning electron microscopy images showed that the phosphors were 20-30 nm in diameter and X-ray diffraction analysis revealed that they underwent polycrystalline growth upon the addition of a sensitizer, similar to the polycrystalline growth of bulk phosphors. In addition, the phosphors exhibited a strong peak at 613 nm and luminescence similar to conventional phosphors. Phosphors that were produced using citric acid as a sensitizer showed more than double the level of luminescence and could be used to produce higher quality images compared to non-sensitized phosphors. The phosphors also exhibited a high degree of luminescence stability.

Analysis of 3D soft tissue changes after 1- and 2-jaw orthognathic surgery in mandibular prognathism patients.

PURPOSE: Orthognathic surgery has the objective of altering facial balance to achieve esthetic results in patients who have severe disharmony of the jaws. The purpose was to quantify the soft tissue changes after orthognathic surgery, as well as to assess the differences in 3D soft tissue changes in the middle and lower third of the face between the 1- and 2-jaw surgery groups, in mandibular prognathism patients. MATERIALS AND METHODS: We assessed soft tissue changes of patients who have been diagnosed with mandibular prognathism and received either isolated mandibular surgery or bimaxillary surgery. The quantitative surface displacement was assessed by superimposing preoperative and postoperative volumetric images. An observer measured a surface-distance value that is shown as a contour line. Differences between the groups were determined by the Mann-Whitney U test. The Spearman correlation coefficient was used to evaluate a potential correlation between patients' surgical and cephalometric variables and soft tissue changes after orthognathic surgery in each group. RESULTS: There were significant differences in the middle third of the face between the 1- and 2-jaw surgery groups. Soft tissues in the lower third of the face changed in both surgery groups, but not significantly. The correlation patterns were more evident in the lower third of the face. CONCLUSION: The overall soft tissue changes of the midfacial area were more evident in the 2-jaw surgery group. In 2-jaw surgery, significant changes would be expected in the midfacial area, but caution should be exercised in patients who have a wide alar base.

Post-operative soft tissue changes in patients with mandibular prognathism after bimaxillary surgery.

PURPOSE: The objective of this study was to evaluate the three-dimensional soft tissue changes observed over time after bimaxillary surgery for mandibular prognathism using cone-beam computed tomography (CBCT) superimposed imaging. MATERIALS AND METHODS: CBCT scans were obtained for 25 patients before bimaxillary surgery (T0), at 2 months after surgery (T1) and at 6 months after surgery (T2). Cephalometric variables from the reoriented volumetric images were measured and compared at T0, T1, and T2. The quantitative surface displacement in the middle and the lower third of the facial soft tissue using CMF tools was assessed by superimposing the T0 and T1 or T0 and T2 3D images. RESULTS: The soft tissue in middle third of face moved forward at T1 and significantly moved backward from T1 to T2 (Ch-Al, p < 0.001; Al, p < 0.05; Pn, p < 0.05). Most of the soft tissue changes from T1 to T2 were not correlated with the hard tissue changes (p > 0.05), while the cheeks were positively correlated with the soft tissue around them (Exo-Al, p < 0.01; Ch-Al, p < 0.01). CONCLUSION: Post-operative soft tissue changes occurred in the middle third of the face and are considered to be more complex than the changes in the lower third of face. Therefore, soft tissue assessment at least 6 months after surgery is desirable.

The effect of oxidation on properties of graphene and its polycaprolactone nanocomposites.

A functionalized graphene sheet (FGS), which was prepared by the thermal reduction of graphite oxide, was modified by oxidation with H2O2. Elemental analysis, X-ray photoelectron spectroscopy, and Fourier transform infrared (FTIR) spectroscopy showed that additional oxygen functional groups, either doubly or singly bound to carbon, were created by the oxidation. The size and electrical conductivity of the FGS were reduced by the oxidation. During FGS/Polycaprolactone (PCL) nanocomposite preparation by an in situ polymerization method, PCL was grafted onto a FGS by chain growth from a functional group on FGS such as hydroxyl. Thermogravimetry and FTIR spectra demonstrated that the amount of grafted polycaprolactone (PCL) was decreased by the oxidation of FGS, suggesting that PCL chain growth from the FGS surface was inhibited by the neighboring carboxylic acid group on the FGS. Enhanced compatibility between the oxidized FGS and the PCL matrix was observed by optical microscopy and scanning electron microscopy. The reinforcing effect on tensile properties was also enhanced by the oxidized FGS in the FGS/PCL nanocomposites. This suggests that the surface coverage by the grafted PCL chains on the oxidized FGS is higher than that on a pristine FGS, although the grafted PCL chain length is shorter and the amount grafted is smaller.

Do patients treated with bimaxillary surgery have more stable condylar positions than those who have undergone single-jaw surgery?

PURPOSE: Because condylar positioning after sagittal split ramus osteotomy of the mandible has been known to affect postoperative skeletal stability, accurate positional assessment of the temporomandibular joint after orthognathic surgery is vital to maximize stability of the surgery. The purpose of this study was to evaluate condylar changes after single-jaw and double-jaw surgeries in mandibular prognathism patients by comparing 3-dimensional angular and positional changes of the condylar heads in groups of patients receiving combined maxillary posterior impaction and mandibular setback and those undergoing only mandibular setback surgeries. PATIENTS AND METHODS: We assessed condylar changes of patients who have been diagnosed with mandibular prognathism and underwent either bimaxillary surgery or isolated mandibular surgery at Kangdong Sacred Heart Hospital and SmileFuture Orthodontic Clinic, Seoul, South Korea, from August 2008 to February 2011. Condylar angulation, intercondylar distance, and amount of condylar displacement were examined based on the 3-dimensional reconstructed images. Preoperative and postoperative changes within each group were assessed by paired t test. Differences between the groups were determined by independent t test. RESULTS: A total of 43 skeletal Class III patients were included in this retrospective, multicenter study. After single-jaw surgery, condylar angulations in all dimensions did not change. In contrast, those who received double-jaw surgery showed forward rotation of 1.93° (P = .027) and medial rotation of 1.48° (P = .032) in the sagittal and axial planes, respectively. The mean distances of condylar displacements were 0.28 ± 0.44 mm in the single-jaw group and 0.31 ± 0.51 mm in the double-jaw group, but there was no statistically significant difference. CONCLUSIONS: Condylar angulations are more stable after sagittal split ramus osteotomy of the mandible as an isolated procedure than in combination with the posterior maxillary impaction in treatment of skeletal Class III malocclusion patients. Condylar displacements in both the single-jaw and double-jaw groups are clinically insignificant.

Three-dimensional analysis of pharyngeal airway volume in adults with anterior position of the mandible.

INTRODUCTION: The purpose of this study was to examine whether the pharyngeal airway volume in adults with skeletal Class III malocclusion is greater than in subjects with Class I occlusion and whether the pharyngeal airway volume correlated with facial morphology. METHODS: Cone-beam computed tomography scans were obtained from 60 subjects, who were assigned to 2 groups. The skeletal Class III malocclusion group consisted of 31 subjects (16 men, 15 women) who had planned on orthodontic treatment with orthognathic surgery. The Class I malocclusion group consisted of 29 subjects (14 men, 15 women). The pharyngeal airway volumes and areas were measured and compared with cephalometric variables. RESULTS: The cross-sectional areas of the lower part of the pharyngeal airway and the volume of the upper part of the pharyngeal airway were greater in skeletal Class III malocclusion patients than in Class I malocclusion patients. The volume of the upper part of the pharyngeal airway showed negative correlations with ANB angle and the Wits appraisal, and positive correlations with SNB, APDI, pogonion to N-perp, gonial angle, and FMA. CONCLUSIONS: The volume of the upper part of the pharyngeal space was greater in patients with skeletal Class III malocclusion, and the increased volume of the upper part of the pharyngeal airway showed significant correlations with measurements characterizing the anterior position of mandible.

Three-dimensional changes in pharyngeal airway in skeletal class III patients undergoing orthognathic surgery.

PURPOSE: It has often been hypothesized that mandibular setback surgery causes narrowing of the pharyngeal airway. We examined whether the pharyngeal airway narrowed after orthognathic surgery in patients undergoing either mandibular setback surgery or bimaxillary surgery and whether the amount of narrowing of the pharyngeal airway was any different after mandibular setback surgery or bimaxillary surgery. MATERIALS AND METHODS: Cone-beam computed tomography scans were obtained for 21 patients who were assigned to either mandibular setback surgery or bimaxillary surgery. The anteroposterior dimension, lateral width, cross-sectional area, and volume of each subject's pharyngeal airway were measured before and after surgery. RESULTS: The pharyngeal airway showed significant narrowing after both mandibular setback surgery and bimaxillary surgery. The amount of change in the anteroposterior dimension and cross-sectional area on the posterior nasal spine plane and the length of the pharyngeal airway showed significant differences between the 2 groups. CONCLUSION: The amount of narrowing of the pharyngeal airway was smaller in patients undergoing bimaxillary surgery than in the patients undergoing mandibular setback surgery.

Three-dimensional analysis of pharyngeal airway form in children with anteroposterior facial patterns.

OBJECTIVE: To test the null hypothesis that the form and size of the pharyngeal airways in preadolescents do not differ among various skeletal patterns. MATERIALS AND METHODS: Sixty healthy children (mean age, 11.79 ± 1.11 years) were divided into three groups by anteroposterior jaw relationships. Using cone-beam computed tomography, the inclination and the volume of the pharyngeal airway were measured and compared with craniocervical angles and cephalometric variables. RESULTS: Children with Class II malocclusion have a larger angle between the FH plane and midplane of the oropharyngeal airway (ang-OA) compared with children with Class I and III malocclusion (P < .01). Ang-OA was significantly correlated with craniocervical angle (ang-cc) and anteroposterior variables, mainly ANB angle, Pog-N perpendicular (P < .01). Airway volume had a positive correlation with facial depth (P < .01). CONCLUSION: Children with Class II malocclusion have more backward orientation and smaller volume of the pharyngeal airway than do children with Class I and III malocclusion. Inclination of the oropharyngeal airway might be a key factor in determining the form of the entire pharyngeal airway and is related to head posture.