Evaluation of Biomechanical Stability of Teeth Tissue According to Crown Materials: A Three-Dimensional Finite Element Analysis.

The biomechanical effects of dental tissue according to various dental crown materials were investigated using finite element analysis. Bone, prepared tooth, root canal, and periodontal ligament were modeled based on computed tomography. Depending on the characteristics of the crown material, it was classified into zirconia, hybrid ceramic, gold alloy, and acrylic resin. A loading force of 200 N was applied in the vertical direction to the occlusal surface of the crown, and analysis was performed under the condition that all interfaces were tied. The results demonstrate that the highest von Mises stress was shown in the prepared tooth of the acrylic resin model, which is a temporary prosthesis, and the pulpal pressure was also the highest. Additionally, among the final prosthesis, the highest stress was shown in the hybrid ceramic model prepared teeth. The properties of restoration materials can be a factor influencing the tooth structure. Thus, in order to make a correct decision when selecting a material for restorative treatment, it is necessary to understand, analyze, and evaluate the properties of these restoration materials.

SiO-induced thermal instability and interplay between graphite and SiO in graphite/SiO composite anode.

Silicon monoxide (SiO), which exhibits better cyclability compared to silicon while delivering higher capacity than that of graphite, is an adequate material for the development of lithium-ion batteries (LIBs) having higher energy densities. However, incorporating silicon-based materials including SiO into stable graphite anode inevitably degrades not only cycle life but also calendar life of LIBs, while little is known about their aging mechanisms. Here, SiO-induced thermal instability of the graphite/SiO composite anode is investigated. We reveal that under thermal exposure, SiO accelerates the loss of lithium inventory and concomitantly facilitates the lithium de-intercalation from graphite. This self-discharge phenomenon, which is weakly observed in the graphite anode without SiO, is the result of preferential parasitic reaction on the SiO interface and spontaneous electron and lithium-ion migration to equilibrate the electron energy imbalance between graphite and SiO. Understanding this underlying electron-level interplay between graphite and SiO in the composite anode will contribute toward improving shelf life of SiO-containing LIBs in actual operating conditions.

Assessment of Zinc-Bound Phosphate-Based Glass-Coated Denture-Relining Material with Antifungal Efficacy for Inhibiting Denture Stomatitis.

This study investigated the surface properties, biocompatibility, and antifungal activity against Candida albicans of a denture-relining material coated with zinc-bound phosphate-based glass. First, zinc-bound phosphate-based glass was fabricated. A polymerized denture-relining disk was coated with zinc-bound phosphate-based glass (2%, 4%, and 6%). The surface properties of the control and experimental groups were measured, including the wettability, microhardness, color difference, and gloss. The biocompatibility was evaluated using the MTT assay according to ISO 10993-5. The antifungal activity was investigated by counting the number of colony-forming units of Candida albicans. The results were analyzed using a one-way ANOVA and Tukey's test (p = 0.05). The results of this study indicate that, despite the antimicrobial effect of zinc-bound phosphate-based glass, a coated denture-relining material does not degrade the surface properties and biocompatibility. Therefore, this novel material is considered promising for use as a dental material with antimicrobial properties that can potentially prevent denture stomatitis.

Osteogenic differentiation and inflammatory response of recombinant human bone morphogenetic protein-2 in human maxillary sinus membrane-derived cells.

The aim of the present study was to investigate the osteogenic potential of human maxillary sinus membrane (hMSM)-derived cells, and the role of recombinant human bone morphogenetic protein-2 (rhBMP-2) in the inflammatory response of hMSM-derived cells and gingival fibroblasts following sinus floor elevation procedure (SFE). hMSM-derived cells from the samples were isolated, subcultured, and analyzed using immunohistochemical staining and flow cytometry. The hMSM-derived cells obtained from passage 6 were used for Alizarin Red staining and quantitative reverse transcription-quantitative PCR to observe its osteogenic activity and inflammatory reaction upon supplementation with rhBMP-2. The hMSM-derived cells were shown to be heterogeneous, as indicated by their positive expression of human mesenchymal stem cell markers (STRO-1, high mobility group AT-hook 2, CD44, CD105 and OCT-3/4), fibroblast cell marker (fibroblast-specific protein 1) and epithelial cell marker (epithelial cell adhesion molecule). Calcium nodules were found to be more notably evident in the rhBMP-2 group, following osteogenic differentiation. The gene expression of osteogenic markers was significantly upregulated in the cells supplemented with rhBMP-2. Supplementation with rhBMP-2 also enhanced the expression of inflammatory markers in hMSM-derived cells and gingival fibroblasts; however, NF-κB and TNF-α expression was not significantly increased compared with the control in the hMSM-derived cells. hMSM contains mesenchymal stem cells (MSCs) capable of differentiating into osteogenic cells. The supplementation of rhBMP-2 enhanced osteogenic differentiation and induced an inflammatory response which was greater in gingival fibroblasts compared with hMSM-derived cells. In summary, the hMSM is a potential contributor to the osteogenic process following SFE, and the use of rhBMP-2 may increase the inflammatory response accordingly. The gingival tissue may be responsible for the increased inflammatory response by rhBMP-2 and postoperative complications.

Novel Dental Poly (Methyl Methacrylate) Containing Phytoncide for Antifungal Effect and Inhibition of Oral Multispecies Biofilm.

Despite the many advantages of poly (methyl methacrylate) (PMMA) as a dental polymer, its antifungal and antibacterial effects remain limited. Here, phytoncide was incorporated into PMMA to inhibit fungal and biofilm accumulation without impairing the basic and biological properties of PMMA. A variable amount of phytoncide (0 wt % to 5 wt %) was incorporated into PMMA, and the basic material properties of microhardness, flexural strength and gloss were evaluated. In addition, cell viability was confirmed by MTT assay. This MTT assay measures cell viability via metabolic activity, and the color intensity of the formazan correlates viable cells. The fungal adhesion and viability on the PMMA surfaces were evaluated using Candida albicans (a pathogenic yeast). Finally, the thickness of saliva-derived biofilm was estimated. The flexural strength of PMMA decreased with increasing phytoncide contents, whereas there were no significant differences in the microhardness and gloss (p > 0.05) and the cell viability (p > 0.05) between the control and the phytoncide-incorporated PMMA samples. The amounts of adherent Candida albicans colony-forming unit (CFU) counts, and saliva-derived biofilm thickness were significantly lower in the phytoncide-incorporated PMMA compared to the control (p < 0.05). Hence, it was concluded that the incorporation of appropriate amounts of phytoncide in PMMA demonstrated antifungal effects while maintaining the properties, which could be a possible use in dentistry application such as denture base resin.

Changes in the physical properties and color stability of aesthetic restorative materials caused by various beverages.

This study investigates the effects of various beverages on the wettability, microhardness, and color stability of aesthetic dental restorative materials. A contact angle analyzer, Vickers hardness tester, and spectrophotometer were used to characterize the properties of the materials and a total of 225 specimens were prepared: 75 each for a resin composite, compomer, and giomer. Ingestion of energy drinks and cola caused the greatest deterioration in wettability and microhardness, and coffee caused the most significant color change. In addition, the change in the resin composite was lower than that of the other restorative materials. The extent of change in the restorative materials increased with duration and frequency of contact with the beverages, so a reduction in the frequency of ingestion of these beverages is recommended.

Activation of calcium signaling by hepatitis B virus-X protein in liver cells.

Hepatitis B virus x gene product (HBx) is known to be a transactivator of transcriptional elements that regulate the expression of a variety of genes associated with the growth, differentiation, survival and the apoptosis of cells. However, the exact mechanism of the activation and inhibition of cellular events by HBx remains uncertain. The present study was designed to measure the effect of HBx, on the signal transduction pathways associated with intracellular Ca(2+) mobilization following HBx transfection in the stable Chang liver cells (CHL-X). Enhanced cell proliferation by HBx in CHL-X was confirmed by MTT assay and by the immunodetection of PCNA. The transactivation of AP-1 by HBx induced in CHL-X was inhibited by cyclosporin A (CsA), a mitochondrial Ca(2+) channel blocker and by BAPTA-AM, a cytosolic Ca(2+) blocker. Activation of the SAPK/JNK signaling pathway by HBx was evidenced by the increased phosphorylations of c-Jun (Ser63) and of JNK (Thr183/Tyr185). Increased phospho-Erk/Erk and phospho-Raf1/Raf in HBx-induced CHL-X indicated that HBx might stimulate the MAPK pathway. PI3K activity and cytosolic free Ca(2+) levels were elevated in HBx-induced CHL-X. These results imply that HBx transactivates both JNK and MAPK signal transduction pathways in association with the mobilization of cytosolic Ca(2+).