Highly effective organic light-emitting diodes containing thermally activated delayed fluorescence emitters with horizontal molecular orientation.

In this study, we report new thermally activated delayed fluorescence (TADF) emitters, AcPYM (10,10'-(pyrimidine-2,5-diylbis(4,1-phenylene))bis(9,9-dimethyl-9,10-dihydroacridine)) and PxPYM (10,10'-(pyrimidine-2,5-diylbis(4,1-phenylene))bis(10H-phenoxazine)), by employing donor units at the 2,5-positions of the pyrimidine acceptor unit. The donor-acceptor-donor (D-A-D) units combined in the linear molecular structure of AcPYM or PxPYM enhanced the horizontally oriented alignment, and the horizontal transition dipole moments were realized by up to 87% in the host matrix. Organic light-emitting diodes (OLEDs) containing AcPYM and PxPYM emitters realized external quantum efficiencies (η ext) of 16.8% for blue and green emissions.

Classification of spectroscopically encoded resins by Raman mapping and infrared hyperspectral imaging.

Barcoded resins (BCRs) were recently introduced as a potential platform for pre-encoded multiplexed synthesis, screening, and biomedical diagnostics. A key step toward the development of this strategy is the ability to rapidly interrogate and classify the BCRs in a high-throughput, noninvasive manner. Here, we describe a one-step strategy based on Raman mapping and Fourier transform infrared imaging to classify and spatially resolve randomly distributed BCRs. To illustrate this methodology, mixtures of up to 25 different BCRs were imaged and classified with 100% confidence. This strategy can be readily extended to a larger pool of resins, provided each BCR features a unique vibrational fingerprint (spectroscopic barcode). We have also established that reliable single-bead Raman spectra can be recorded in 10 ms, thus confirming that Raman mapping, in particular, could be a very fast method to classify the BCRs.

Characterization of n-butyl acrylate centered triads in poly(n-butyl acrylate-co-carbon monoxide-co-ethylene) by isotopic labeling and two dimensional NMR.

UNLABELLED: Poly(n-butylacrylate-co-carbon monoxide-co-ethylene) (polyEBC) samples prepared from 13C-labeled monomer, n-butyl acrylate, were characterized using two dimensional (2D) pulsed field gradient (PFG) 750 MHz NMR spectroscopy. To elucidate the complex structure of the terpolymer, 2D-1H/13C-heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) experiments were conducted by selectively exciting the enhanced resonances in the spectra of two polymer samples, one polymer resulting from synthesis with 1-13C-n-butylacrylate monomer and a second polymer obtained from a synthesis with 2-13C-n-butylacrylate monomer. High-resolution 2D-NMR combined with 13C-labeling of the polymer greatly simplifies the 2D-NMR spectra, selectively enhances the weak peaks from low occurrence B-centered triad structures, and aids in their resonance assignments. In all experiments, the sample temperature was 120 degrees C, to ensure a homogeneous solution and sufficient molecular mobility. ELECTRONIC SUPPLEMENTARY MATERIAL: Supplementary material (1D 13C NMR spectra of the 13C-labeled and unlabeled polymers) is available in the online version of this article at http://dx.doi.org/100.1007/s00216-003-2402-3.

Studies of poly(styrene-co-allyl alcohol)/polyester blends using Fourier transform infrared spectroscopy and imaging.

The interaction of poly(styrene-co-allyl alcohol) and aliphatic polyester was studied using FT-IR spectroscopy. The hydrogen bonding between two polymers was investigated by monitoring C=O and OH stretching modes with the variation of concentration and temperature. The phase-separated morphology was also observed using FT-IR imaging, where the spectroscopic analysis of each phase is available.

Synthesis and Surface Property Variations of Polypropylene-graft-poly(ethylene glycol).

Graft copolymers containing nonpolar main chains and polar side chains capable of acid-base interaction show surface property variations depending on the sample preparation methods. A series of polypropylene-graft-poly(ethylene glycol)s were synthesized and their surface property variations were studied using surface analysis techniques, such as surface contact angle measurement and X-ray photoelectron spectroscopic analysis. Molding against various substrates, dip-coating, vacuum annealing, and water-contact techniques were employed for the experiment. Different surfaces were obtained depending on the degree of acid-base interaction between the polymer surface and interfacing phase. These surface property variations were concluded to be the result of minimum interfacial free energy formation. Copyright 2001 Academic Press.